• Structural Engineering and Mechanics
• /
• v.14 no.1
• /
• pp.71-84
• /
• 2002

A finite element formulation for the time-domain analysis of linear transient elastodynamic problems is presented based on the weak form obtained by applying the Galerkin's method to the integro-differential equations which contain the initial conditions implicitly and does not include the inertia terms. The weak form is extended temporally under the assumptions of the constant and linear time variations of field variables, since the time-stepping algorithms such as the Newmark method and the Wilson ${\theta}$-method are not necessary, obtaining two kinds of implicit finite element equations which are tested for numerical accuracy and convergency. Three classical examples having finite and infinite domains are solved and numerical results are compared with the other analytical and numerical solutions to show the versatility and accuracy of the presented formulation.

• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.28-40
• /
• 2022

Although precise temperature control in the heat treatment process is a key factor in process reliability, there are many cases where there is no separate heat source control optimization system in the field. To solve this problem, the program monitors the temperature data according to the heat source change through sensor communication in a recursive method based on multiple variables that affect the process, and the target heat source value and the actual heat treatment heat source to match the internal air temperature and material temperature. A control optimization system was constructed. Through this study, the error rate between the target temperature and the atmosphere (material surface) temperature of around 10.7% with the existing heat source control method was improved to an improved result of around 0.1% using a process optimization algorithm and system.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.2
• /
• pp.127-132
• /
• 2015

In order to grasp the clear concepts and variables to treat Shanghan diseases which has complex meaning by each medical literature, several concepts and analytic method of structuralism from early to late stage encompassing Saussure and Derrida were used. Main concepts are langue and parole, signifiant and signifie, syntagme and paradigme, denotation and connotation, synchronie and diachronie, identity of structure and differance etc. and methods are substituting these concepts to historical Shanghan theories from Zhongjing to Ming-Qing dynasty and comparisons of synchronie about their era. Essential qualities of Shanghan diseases are pathologic phenomena under the order of unification of nature and man formed through concrescence between individual human body and geo-climatico-socio-cultural environmental conditions, neither injuries by cold pathogen nor five types of exopathogenic febrile diseases. The former environmental elements can be inferred from general traits of desires and public pathological aspects of social members, and the latter personal factors from corresponding features to those pathogenic variables. In addition, the concepts of Shanghan disease are added successively up to now via Jin-Yuan's four great masters and Wenbing masters, and thus the new concepts of denotation became another connotation obtaining new signifiant. In this way, for the treatment of Shanghan diseases, new theories should be made for ranging prescription over the wenbing field; reflecting not only climatical variables but also each patient's physio-pathological features and sociocultural variables. Thereby an appropriate and reasonable therapeutical systems can be designed and can guide research direction hereafter.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.241-250
• /
• 1991

The reliability analysis for web frame of tanker is carried out by the probabilistic finite element method combined with the classical reliability method such as MVFOSM and AFOSM which can be used for calculating the probability of failure for the complicated structures in which the limit state equation is implicitly expressed. As random variables external load, elastic modulus, sectional moment of inertia and field stress are chosen and Parkinson's iteration algorithm in AFOSM is used for reliability analysis. By adding only the covariance data of the random variables to the input data set required for conventional finite element method, the present method can easily calculate the probability of failure at every element end as well as the covariances of structural reponses such as displacements at every element end and member forces at every element, even for the complicated ship structure.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.8-15
• /
• 2021

TiO2 has been used in various fields such as solar cells, dental implants, and photocatalysis, because it has high physical and chemical stability and is harmless to the body. TiO2 nanofibers which have a large specific surface area also show a good reactivity in bio-friendly products and excellent photocatalysis in air and water purification. To fabricate TiO2 nanofibers, an electrospinning method was used. To observe the diameter of TiO2 nanofibers with fabrication variables, the fabrication variables was divided into precursor composition variables and process variables and microstructure was analyzed. The concentrations of PVP (Polyvinylpyrrolidone) and TTIP (Titanium(IV) isopropoxide) were selected as precursor composition variables, and inflow velocity and voltage were also selected as process variables. Microstructure and crystal structure of TiO2 nanofibers were analyzed using FE-SEM (Field emission scanning electron microscope) and XRD (X-ray diffraction), respectively. As-spun TiO2 nanofibers with an average diameter of about 0.27 ㎛ to 1.31 ㎛ were transformed to anatase TiO2 nanofibers with an average diameter of about 0.22 ㎛ to 0.78 ㎛ after heat treatment of 3 hours at 450℃. Anatase TiO2 nanofibers with an average diameter of 0.22 ㎛ can be expected to improve the photocatalytic properties by increasing the specific surface area. To change the average diameter of TiO2 nanofibers, the control of precursor composition variables such as concentrations of PVP and TTIP is more efficient than the control of electrospinning process variables such as inflow velocity and voltage.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.468-475
• /
• 2016

In this article, entropy generation on MHD Williamson nanofluid over a porous shrinking sheet has been analyzed. Nonlinear thermal radiation and chemical reaction effects are also taken into account with the help of energy and concentration equation. The fluid is electrically conducting by an external applied magnetic field while the induced magnetic field is assumed to be negligible due to small magnetic Reynolds number. The governing equations are first converted into the dimensionless expression with the help of similarity transformation variables. The solution of the highly nonlinear coupled ordinary differential equation has been obtained with the combination of Successive linearization method (SLM) and Chebyshev spectral collocation method. Influence of all the emerging parameters on entropy profile, temperature profile and concentration profile are plotted and discussed. Nusselt number and Sherwood number are also computed and analyzed. It is observed that entropy profile increases for all the physical parameters. Moreover, it is found that when the fluid depicts non-Newtonian (Williamson fluid) behavior then it causes reduction in the velocity of fluid, however, non-Newtonian behavior enhances the temperature and nanoparticle concentration profile.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.37-42
• /
• 2001

A computerized axial flow fan design system is developed with the capabilities for predicting the aerodynamic performance and the noise characteristics of fan. In the present study, the basic fan blading design is made by combining vortex distribution scheme with camber line design, airfoil selection, blade thickness distribution and stacking of blade elements. With the designed fan blade geometry, the through-flow field and the performance of fan are analyzed by using the streamline curvature computing scheme with spanwise total pressure loss and flow deviation models. Fan noise is assumed to be generated due to the pressure fluctuation induced by wake vortices of fan blades and to radiate as dipole distribution. The vortex-induced fluctuating pressure on blade surface is calculated by combining thin airfoil theory and the predicted flow field data. The predicted performances, sound pressure level and noise directivity patterns of fan by the present method are favorably compared with the test data of actual fans. Furthermore, the present method is shown to be very useful in designing the blade geometry of new fan and optimizing design variables of the fan to achieve higher efficiency and lower noise level.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.593-602
• /
• 2000

The shape optimization is performed to minimize the judder of ventilated disc brake rotor that is induced by the thermal deformation of the disc. A three-dimensional finite element is developed to analyze the coupled system of temperature and displacement field, and the thermal conductivity and mechanical stiffness matrices are simultaneously taken into account. To reduce computing time, an equivalent heat transfer rate is introduced approximating the heat transfer rate on the disc surface. A deformation factor is introduced to describe the thermal deformation causing the judder. The deformation factor is chosen as an objective function in the optimization process. Consequently an optimum design is then performed minimizing the deformation factor with the design variables of the shape of the disc. The optimum design procedure presented in this study is proven to be an effective method of minimizing the judder, and it reduces the thermal deformation by 23% of the initial geometry.

• International Journal of Safety
• /
• v.5 no.1
• /
• pp.37-41
• /
• 2006

The major objective of the statistical analysis about industrial accidents is to determine the safety factors so that it is possible to prevent or decrease the number of future accidents by educating those who work in a given industrial field in safety management. So far, however, there exists no quantitative method for evaluating danger related to industrial accidents. Therefore, as a method for developing quantitative evaluation technique, this study presents feature analysis of industrial accidents in manufacturing field using QUEST algorithm. In order to analyze features of industrial accidents, a retrospective analysis was performed on 10,536 subjects (10,313 injured people, 223 deaths). The sample for this work was chosen from data related to manufacturing businesses during a three-year period ($2002{\sim}2004$) in Korea. This study used AnswerTree of SPSS and the analysis results enabled us to determine the most important variables that can affect injured people such as the occurrence type, the company size, and the time of occurrence. Also, it was found that the classification system adopted in the present study using QUEST algorithm is quite reliable.

• Journal of computational fluids engineering
• /
• v.14 no.4
• /
• pp.67-77
• /
• 2009

This paper is a continuation of a recent development on the Hermite-based divergence-free element method and deals with a non-isothermal fluid flow driven by the buoyancy force in a square cavity with temperature difference across the two sides. Two Hermite functions are considered for numerical computations in this paper. One is a cubic function and the other is a quartic function. The degrees-of-freedom of the cubic Hermite function are stream function and its first and second derivatives for the velocity field, and temperature and its first derivatives for the temperature field. The degrees-of-freedom of the quartic Hermite function include two second derivatives and one cross derivative of the stream function in addition to the degrees-of-freedom of the cubic stream function. This paper presents a brief review on the Hermite based divergence-free basis functions and its finite element formulations for the buoyancy driven flow. The present algorithm does not employ any upwinding or a stabilization term. However, numerical values and contour graphs for major flow variables showed good agreements with those by De Vahl Davis[6].