• Journal of Biosystems Engineering
• /
• v.31 no.2 s.115
• /
• pp.95-101
• /
• 2006

Present chemical application system using a power sprayer has been a labor intensive, ineffective and shirking task in farming. Therefore, a small RF controlled (unmanned) helicopter was suggested to replace the conventional spray system. The aerial application using the unmanned helicopter has been already utilized in Japan, where total area applied up to 704,000 ha in 2005. In this article, the status and cost analysis on the unmanned agricultural helicopter were studied. The aerial application using the agricultural helicopter helps precise and timely spraying and reduces labor intensity and pollution. The field capacity of the helicopter was found to be 60-70 ha a day. The break even point was estimated near the operating area of 750 ha annum. The development of an agricultural helicopter was necessary for taking advantages of both technique and economy.

• Journal of the Korean Professional Engineers Association
• /
• v.32 no.1
• /
• pp.122-141
• /
• 1999

Groupware is a new emerging research field, involving increasing numbers of institutions in the USA, Europe, and Asia such as Korea and Japan, etc., as an interdisciplinary research and development area with a strong computer science component. It grew from fairly unsystematic attempts by various developers to generate software that would increase the competence of people working together. This in turn was partly a response to: failures of and problems inherited from Office Automation and Management Information System ; some sociological intuitions about ways people might work together; and a search for uses of new interfacing, networking, and multi-media technologies. In this paper, groupware that has been configured to meet the needs of groups at work is defined as computer-based systems which support working groups of people engaged in common task in a shared environment. The basic concepts, origin, and historic research of the groupware are described. Specially, groupware relies on the approaches and contributions of many disciplines in computer science as well as sociology that is concerning human, social, and cultural activities. So, nine key disciplines of them upon which successful groupware depends are described briefly. Some state-of-the-art implementations and developments are reviewed through classifying and analyzing the current available groupware applications in the field or market.

• Computers and Concrete
• /
• v.17 no.2
• /
• pp.241-253
• /
• 2016

Depending on the researcher, the effect of prestressing on the natural frequency of a PSC (prestressed concrete) structure appear to have been interpreted differently. Most laboratory tests on PSC beams available showed that the natural frequency is increased appreciably by prestressing. On the other hand, some other references based on field experience argued that the dynamic response of a PSC structure does not change regardless of the prestressing applied. Therefore, the deduced conclusions are inconsistent. Because an experiment with and without prestressing is a difficult task on a full size PSC bridge, the change in natural frequency of a PSC bridge due to prestressing may not be examined through field measurements. The study examined analytically the effects of prestressing on the natural frequency of PSC bridges. A finite element program for an undamped dynamic motion of a beam-tendon system was developed with additional geometric stiffness. The analytical results confirm that a key parameter in changing the natural frequency due to prestressing is the relative ratio of prestressing to the total weight of the structure rather than the prestressing itself.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.4
• /
• pp.201-212
• /
• 2019

The study aims to identify the role of transformational leadership toward work performance through intrinsic motivation in pharmaceutical field by a survey of 220 pharmacists in Vietnam. The pharmaceutical industry in Vietnam is experiencing rapid growth, accompanied by the need for a change in leadership for managers. The transformational leadership creates a proactive, positive attitude, passion, interest or an increase in intrinsic motivation of employees, thereby affecting work performance. This study performed reliable verification by Cronbach's Alpha coefficient, then the factors are analyzed by EFA before conducting multivariate regression analysis. The results showed that the transformational leadership style includes such factors as: idealized influence (attributed and behavior), inspirational motivation, intellectual stimulation, individualized consideration have a positive impact on intrinsic motivation and thereby positively affecting work performance. It confirms that employees will have a higher intrinsic motivation level when working under transformational leadership from their leaders. It makes employees work more efficiently. According to the research results, the pharmacist has an intrinsic motivation to work hard on tasks that contribute to the group overall goal of. That requires managers to have a task assignment strategy to connect the goals of the members together as well as of the members to the group.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1670-1683
• /
• 2017

Mitotic event recognition is a crucial and challenging task in biomedical applications. In this paper, we introduce the slow feature analysis and propose a fully-automated mitotic event recognition method for cell populations imaged with time-lapse phase contrast microscopy. The method includes three steps. First, a candidate sequence extraction method is utilized to exclude most of the sequences not containing mitosis. Next, slow feature is learned from the candidate sequences using slow feature analysis. Finally, a hidden conditional random field (HCRF) model is applied for the classification of the sequences. We use a supervised SFA learning strategy to learn the slow feature function because the strategy brings image content and discriminative information together to get a better encoding. Besides, the HCRF model is more suitable to describe the temporal structure of image sequences than nonsequential SVM approaches. In our experiment, the proposed recognition method achieved 0.93 area under curve (AUC) and 91% accuracy on a very challenging phase contrast microscopy dataset named C2C12.

• Journal of architectural history
• /
• v.26 no.3
• /
• pp.7-18
• /
• 2017

This research focuses on the cadastre and cartographic tradition regarding the representation of Rome that had lasted until the middle of 18th Century. Since the early period of Roman Republic until the early 18th Century, map was considered as a effective medium to record the status of urban facts and also a manifestation of changing perception of reality. These facts allow to diagnose social and conventional changes that had occurred in the field of representation techniques and methodologies derived from diverse intention and objective in elaboration of each map. Cartography also has affinity to architectural drawing as many categories of individuals are involved, clients, researchers, craftsmen, publisher and collectors. Fundamental task of documenting the contemporary physical reality was given to the map, however, as architects had practiced through the drawings, cartographers also reconstruct in subjective way specific buildings and urban aspects according to various needs and demands. As such, philology and imagination play important role as two constitute extreme poles in the evolution of the cadastre. Through analysis of paradigmatic examples in the genealogy of cartography of Rome, it was possible to understand the changing episteme that testify the mentality and custom in the field of visual representation.

• Korean Management Science Review
• /
• v.32 no.2
• /
• pp.1-14
• /
• 2015

The importance of technical innovation is increasing gradually in accordance with the life cycle of technology being shortened and the convergence being accelerate. This thesis aims to present the Framework of Competency Model of Techno Leadership capable of utilizing in promoting R&D (Research and Development) Leaders systematically by the technology based enterprise. The characteristic of core behavior necessary for Techno Leaders has been sorted out through the literature investigation and the analysis course of meaning, etc., the competency model of Techno Leadership has been deducted by analyzing the relation with MOT (Management of Technology) capacity being common skill of task necessary for Techno Leaders and the characteristic of behavior based on this through the questionnaire survey. The possibility of application in the field as well has been verified by applying the developed competency model in the actual field of enterprise. The competency model of techno Leadership developed in this research may be utilized in the direction establishment for the promotion of Techno Leadership in the enterprise or laboratory, especially, if would be effective to self-diagnose the core competency necessary for R&D manpower to be grown as the Techno leader in the IT oriented enterprise and to establish the improvement direction.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.263-275
• /
• 2010

In the last decade, wireless sensor networks have emerged as a promising technology that could accelerate progress in the field of structural monitoring. The main advantages of wireless sensor networks compared to conventional monitoring technologies are fast deployment, small interference with the surroundings, self-organization, flexibility and scalability. These features could enable mass application of monitoring systems, even on smaller structures. However, since wireless sensor network nodes are battery powered and data communication is the most energy consuming task, transferring all the acquired raw data through the network would dramatically limit system lifetime. Hence, data reduction has to be achieved at the node level in order to meet the system lifetime requirements of real life applications. The objective of this paper is to discuss some general aspects of data processing and management in monitoring systems based on wireless sensor networks, to present a prototype monitoring system for civil engineering structures, and to illustrate long-term field test results.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.791-801
• /
• 2011

Security in wireless sensor networks (WSNs) is an upcoming research field which is quite different from traditional network security mechanisms. Many applications are dependent on the secure operation of a WSN, and have serious effects if the network is disrupted. Therefore, it is necessary to protect communication between sensor nodes. Key management plays an essential role in achieving security in WSNs. To achieve security, various key predistribution schemes have been proposed in the literature. A secure key management technique in WSN is a real challenging task. In this paper, a novel approach to the above problem by making use of elliptic curve cryptography (ECC) is presented. In the proposed scheme, a seed key, which is a distinct point in an elliptic curve, is assigned to each sensor node prior to its deployment. The private key ring for each sensor node is generated using the point doubling mathematical operation over the seed key. When two nodes share a common private key, then a link is established between these two nodes. By suitably choosing the value of the prime field and key ring size, the probability of two nodes sharing the same private key could be increased. The performance is evaluated in terms of connectivity and resilience against node capture. The results show that the performance is better for the proposed scheme with ECC compared to the other basic schemes.

• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.165-169
• /
• 2009

Two dosimeters are provided to radiation workers participating in tasks where high radiation exposure is expected during maintenance at nuclear power plants. At Korean nuclear power plants, two dosimeters are currently provided for tasks where exposure rates exceed 1 mSv/hr, the difference of equivalent dose to specific parts of the body is more than 30% and an exposure of more than 2 mSv is expected in a single task. These conditions for the provisioning of two dosimeters are based on previous field test results, and it is recommended that the dosimeters be worn on the chest and back. It was also found that the workers felt it was more convenient when they wore two dosimeters on chest and back rather than on chest and head. After the application of previous field test results to practice, it was found that the calculated effective dose for workers during radiation work was lower than the maximum dose of chest or back dosimeter by approximately 10%-30%. This performance is regarded not only to meet the international guideline but also to provide convenience for workers during radiation work.