• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.103-112
• /
• 1986

This study was carried out to prevent the entwining of rice straw on rotary shaft and blade where rice straw was spreaded on paddy field as an organic source before rotary tilling. The rotary tillage was conducted in the paddy field having the soil moisture contents of 30%, 39%, 59% in dry basis and spreaded rice straw (450kg/10a) of 30cm, 45cm, 90cm length with the edged curve angles of rotary blade of $30^{\circ}$, $40^{\circ}$, $50^{\circ}$, $55^{\circ}$ at Yuseung area. And the test were performed on the plot which has width of 30cm and 5cm length and the quantity of entwined rice straw was analized. The test results were summarized as the followings. 1. Entwining phenomenon of rice straw was decreased as the blade edged curve angle increased. The edged curve angle of rotary blade must be determind by considering the characteristics of soil cutting resistance, tilling torque and entwining phenomenon of rice straw. But according to the entwining phenomenon of rice straw only, the edged curve angle of rotary blade should be bigger than $55^{\circ}$ for design. 2. Amount of entwining rice straw was minimized when soil moisture contents was 30 percent (d. b.). It would be better that rotary tillage is performed when soil moisture contents is lower than 30 percent in dry basis. 3. Amount of entwining rice straw was minimized when the length of rice straw was 30cm with $55^{\circ}$ edged curve angle. Therefore, it would be better to chop rice straw as 30cm. 4. Entwining phenomenon of rice straw was decreased as the forward speed decreased. To decrease the entwining rice straw, rotary tillage should be done with forward fist gear (0.35m/s).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.174-183
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (II).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.160-173
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (I).

• The Journal of Art Theory & Practice
• /
• no.7
• /
• pp.37-64
• /
• 2009

The theories of Korean Public Art originated by the artists who were against dictatorship and they associated with democratic politicians. They criticized the Fine art that were supported by the dictatorship and gave their efforts for restoration of 'resistance paintings(against dictatorship)', 'proletarian painting', 'realism painting'. In addition, they participated new social ideology(democracy) movement and demonstrated for their rights in arts. These became the main kernel the public art theory was initiated. The public artists splitted into several different parts and participated in the democratic social movement as well as the art movement for freedom. They opened various art exhibitions within different genre, diverse space for various art section such as an exhibition hall, a factories, a university, or a congregation square. Furthermore, the public art theorists published their divergent views through newspaper/broadcasting or unauthorized printed materials. Most of the public artist and the theorists kept their relationship strongly until 1985, the time when 'National Arts Association' started. In 1983 and 1984, they were clearly separated into two parts; artists(move only in art museums) and activists(move in public spaces like school, convention square etc). Their ideological separation also took out national problems. The division; professional artists and armatures, became the social issue as a social stratification matter. And in creating method, there are also other conflicts; critical realism, and public realism as well as western painting and traditional one. These kinds of separation and conflicts made different Public artists associations, under divergent names; 'Reality and Speak'(R&S), 'KwangJu Art Association', 'Durung', 'Dang(Land)', and 'Local Youth Students Association'. In addition, their ideology and pursuit toward art movements were very difference. However, the differences and conflicts weakened When the oppression of democratic education from new dictatorship(Pres. Jun, Doo Hwan) came out. In August. 1985 the government opened to the public so called, 'The draft of School stabilization law'(Hankwon Anjung Bup) to control the teachers' rights and that initiated bigger street demonstration and conflicts between police and educators. In November.1985, assembly meeting of National Arts Association in democracy opened as 'ONE' combined organization. In this presentation, I'd like to summarize the stream of art movement until 1984, and clarify the main art theories that lead the Public Art Movements in 1980s. The main theories in 1980s are crucial because they become the origin of public art theories. This presentation started with O,youn's "Hyunsil Dong In the first declaration" and explained the absent of practice in 1970s. In addition, Won, Dong Suk 's theory was mentioned as all over struggles in theories before 1980s. GA and R&S 's founding declarations in 1970s were the start of public art theorists' activities and this article reported the activities after the declarations. First, realism base on the consciousness of reality. Second, practice art democratization based on the ideology. Third, the subject of public art movement based on understanding people's social stratification structure. Fourth, the matters of national forms and creative ways in arts based on showing reality. Fifth, the strong points in arts that the practitioners accepted. About the public art theories around 1984, I discussed the dividing point of public art theories that were shown in 'generation theory', 'organization theory', and 'popularization theory' by the practitioners. The public realism theory that subjects the contradiction of reality and point out the limits of critical realism not only showing the new creative ways but also giving the feeling of solidarity to the public art activist groups. After that, public art movements expressed 'Dismentlement of Capitalism' and 'Public revolution'. In addition, the direction of public art movements were established strongly. There were various opinions and views during the start and formation of the public art theories. The foundation of theorists activities derived from the practitioners who had the concept based on stratification and nationalism. The strong trend of group division spreaded out by practitioners who opened art work together in factories, universities, squares and rural areas. Now many lively active practitioners are gone to the other field not related with arts, and others join into professional art field not public art one with unknown reason. The theorists have the same situation with the practitioners. It means to me that theory always have to be based on the practice.

• Korean journal of applied entomology
• /
• v.25 no.1 s.66
• /
• pp.53-61
• /
• 1986

The races of soybean cyst nematode, Heterodera glycines were investigated at 13 localities in Kyungpook, Chungpook and Cheonnam provinces for the resistant soybean variety selection to soybean cyst nematode. Race C, 1, and 5 were distributed and among them race 5 was dominant in Korea. Native soybean 203 lines and 25 introduced soybean varieties were investigated in field where soybean cyst nematode race 5 infested. As the result, the reproduction of soybean cyst nematode in native soybean lines decreased on entry number 18, 21, 36, 38, 41, 42, 43, 45, 55, 59, 68, 72, 75, 93, 94, 95, 98, 123, 131, 136, 146, 170, 174, 187, 190, 191 than others. And then, in pot experiment, entry number 170 showed moderately resistant with 10 cysts per root, while entry number 55 was decreased reproduction a little and the other 25 line appeared susceptibility. In introduced soybean varieties, Peking, Illsoy and PI90763 showed resistance and not reproduction in field and pot experiment. But Custer, Delmar, Dyer and Jackson represented moderately resistant under 10 cysts, while the other 18 varieties were susceptible. In yield analysis, native soybean line 170 showed the same tendency as Peking and PI90763 known for resistant varieties in decreased rate of branch number, pod number, pod weight per plant and weight of 100 grains. Peking and PI90763 decreased at the rate of under 1.6% in branch number, pod number, pod weight per plant and weight of 100 grains, while Illsoy showed a little higher decreased rate of 3.8% in pod number and 3.4% in pod weight per plant. Custer, Delmar, Dyer and Jackson represented a little higher decreased rate in yield.

• Korean journal of applied entomology
• /
• v.47 no.2
• /
• pp.155-162
• /
• 2008

The Welsh onion beet armyworm, Spodoptera exigua (Hubner), has attacked Welsh onion and is now the most important pest of Welsh onion in southwestern Korea. The beet armyworm has a wide host range, occurring as a serious pest of vegetable and fields. The relatively high abundance of beet armyworm has stimulated frequent application of insecticides to foliage. Insecticide resistance is a major problem in management of this insect. Accordingly, pesticide application for the control of beet armyworm was tried in both the open field and in laboratory, using 4 synthetic compounds such as metaflumizone and chlorfenapyr, indoxacarb, flufenoxuron, emamectin benzoate. In the laboratory, each developmental stages from eggs, larva to pupa was tested against 4 insecticides. Against the eggs of welsh onion beet armyworm, there was no significantly different with each other. These tested chemicals no killing effect to eggs. However, the population of 1st larva hatched from eggs were reduced because they eaten the egg shell with residual insecticides. The tested insecticides were taken very high mortalities to 1st to 3rd larva of Welsh onion beet armyworm. Otherwise, there were decreased the death rate from 4th to 6th larva. On the other hand, their value of control effects were relatively good against Welsh onion beet armyworms in the field between 87.2 and 90.5% on 10 days after insecticide application.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• The Korean Journal of Mycology
• /
• v.41 no.3
• /
• pp.172-180
• /
• 2013

Grey mold infection rate in tomato was investigated with the inoculation of dead flowers on Botrytis selective media. The grey mold infection rate of flower after fruiting were higher in the order of after 45 days, after 25 days, and fruiting day with 100%, 87% and 65%, respectively. The number of infected flowers were increased with time increase after the flowering before fruiting. BSM (Botrytis selective medium) was used to check grey mold infection rate depending on the flowering stage and cultivar. Grey mold infection rate depending on the flowering stage was similar in all the beef-tomato cultivar as 1.5~5% at preflowering, 1.5~45% at flowering and 75~90% at fruiting. On the other hand, cherry tomato cultivar "KoKo" had lower infection rates of 0~3.5% at pre-flowering, 10~30% at flowering and 20~50% at fruiting. These resulted from the fact that beaf-tomato cultivar have much bigger flowers and larger amount of pollens compared to those of cherry tomato cultivar. The amounts of falling pollens of Botrytis spp. were checked for beaf-tomato cultivar and cherry tomato cultivar using BSTM. The amounts of falling pollens were increased as growth period was extended, and the amount of spores increased rapidly during the outbreak of grey mold. Twelve field trials in Buyeo and Iksan areas showed that Fluazinam, and Diethofencarb+Carbendazim were effective fungicides to control tomato grey mold, and these results were similar to those of field trials with BSTM. This is the first report of Fluazinam as a effective fungicide for the control of grey mold of tomato even though it has not been registered yet for the control of gray mold in tomato.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.429-436
• /
• 2005

As Sclerotinia sclerotiorum causing cucumber sclerotinia rot was the fastest in the mycelial growth at $25^{\circ}C$, its pathogenicity was strong at the same temperature among several temperatures. All the isolates of Sclerotinia sclerotiorum showed a strong pathogenicity against cucumber fruits, which was confirmed by a disk assay and a wound assay. A wound assay was superior to a disk assay to develop the assay system for assessing the fungicidal activity of several fungicides against Sclerotinia sclerotiorum. In a disk assay, it was very difficult to assess the fungicidal activity, because the pathogenicity of isolates used in the experiment was very strong. At 500 and $3.0{\mu}g/mL$, the activity of dichloflouanid and the mixture of carbendazim and diethofencarb against cucumber sclerotinia rot was 14.3 and 42.3%, respectively, by using a disk assay. However, at same concentration two fungicides showed the high controlling activity as 100 and 92.5%, through a wound assay in a laboratory. Also, the activity of two fungicides was good against cucumber sclerotinia rot in the greenhouse where cucumber plants were cultivated in the field, showing the control value as 91.1 and 82.9% at 100 and $825{\mu}g/mL$, respectively. All the isolates of Sclerotinia sclerotiorum from cucumber fruits sampled in the polyvinyl house were subjected to monitoring for the resistance to 7 fungicides. The $EC_{50}$ value of 7 fungicides was as follows: fenhexamid; $0.13{\mu}g/mL$, procymidon and iprodione; 0.18 and $0.24{\mu}g/mL$, carbendazim and the mixture of carbendazim and diethofencarb; 0.13과 $0.05{\mu}g/mL$, iminoctadine and dichlofluanid; 1.94 and $8.95{\mu}g/mL$. Ultimately it was not found that resistant isolates of Sclerotinia sclerotiorum were appeared in the field.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.630-634
• /
• 2009

"Hyedang", a new covered cultivar derived from the crosses between "Suwon300" and "Haganemugi//CI08397/Haganemugi" developed at the Honam Agricultural Research Institute (HARI), NICS, RDA in 2007. The origin of "Hyedang" is "Iksan 407" (SB951033-B-B-B-72). The initial cross was made in 1995 and the selected line showed a high yield and good quality characteristics under yield trial test in 2004. "Iksan407" consistently performed well for three years (2005-2007) from the four locations of regional yield trial (RYT) in Korea and released as "Hyedang". The characteristics of "Hyedang" were the following: rate III growth habit, green leaf and stem, compact spike and with long rough awns. The heading date was April 25 in upland and April 17 in paddy field, which was 2 and 3 days earlier than that of check cultivar, "Olbori". The culm length was 80 cm which was 8 cm shorter than those of check cultivar. It showed spike length of 4.3 cm and 696 spikes per $m^2$, 51 grains per spike, 35.0 g of 1,000 grain weight and 704 g of test weight. It showed stronger winter hardiness and higher resistance to barley yellow mosaic virus (BaYMV) than those with check cultivar. It showed similar protein content and higher whiteness than those of the check cultivar and diastatic power was higher than that of Olbori. The average yield of the pearled grain in the RYT was $4.17ton\;ha^{-1}$ in upland and $4.27ton\;ha^{-1}$ in paddy field, which was 23% and 9% higher than that of the check cultivar, respectively. This cultivar would be suitable for the area above the daily minimum mean temperature of $-8^{\circ}C$ in January in Korean peninsula.