• 제목/요약/키워드: field resistance

검색결과 2,408건 처리시간 0.029초

볏짚 시용(施用) 답(畓)의 Rotary 경운시(耕耘時) 날의 궤적(軌跡) 진입각(進入角)이 볏짚 감김에 미치는 영향(影響) (Effects of Edged Curve Angle of Rotary Blade on Entwining Spreaded Rice Straw in Paddy)

  • 이운용;김성래
    • 농업과학연구
    • /
    • 제13권1호
    • /
    • pp.103-112
    • /
    • 1986
  • 볏짚을 토양표면(土壤表面)에 살포(撒布)한 답(沓)을 동력경운기(動力耕耘機)의 Rotary로 경운작업(耕耘作業)할 때 볏짚이 Rotary 경운(耕耘)날과 축(軸)에 볏짚이 감기는 것을 방지(防止)기 위(爲)하여 토양함수비(土壤含水比)(30%, 39%, 59%) (d.b.)와 볏짚의 절단(切斷)길이 (30cm, 45cm, 90cm), 경운(耕耘)날의 궤적진입각(軌跡進入角)($30^{\circ}$, $40^{\circ}$, $50^{\circ}$, $55^{\circ}$, $60^{\circ}$, $70^{\circ}$, Rotary의 전진속도(前進速度)(저속 l단, 저속 2 단, 저속 3단) 에 변화(變化)를 주어 충남(忠南) 유성(儒城)의 점질양토(粘質壤土)의 답(沓)에서 아끼바레 볏짚을 10a 당(當) 450kg 시용(施用)하고 각(各)처리구별(處理區別)로 경폭(耕幅) 30cm, 길이 5m의 포장(圃場)에서 볏짚 감김량(量)을 조사분석(調査分析)하였으며 실험결과(實驗結果)를 요약(要約)하면 다음과 같다. 1, Rotary 경운(耕耘)날의 궤적진입각(軌跡進入角) $55^{\circ}$ 이상(以上)이고 토양함수비(土壤合水比)가 30%(d.b.), 볏짚의 절단(切斷)길이가 30cm일 때 볏짚의 감김현상(現像)이 나타나지 않았다. 경운(耕耘)날의 궤적진입각(軌跡進入角)은 토양(土壤)의 절삭저항(切削抵抗), 경운소요동력(耕耘所要動力)과 볏짚의 감김현상(現像)을 함께 고려(考慮)하여 검토(檢討)되어야 할 사항(事項)이나 볏짚의 감김작용(作用)만을 고려(考慮)할 때 경운(耕耘) 날의 궤적진입각(軌跡進入角)은 $55^{\circ}$ 이상(以上) 유지(維持)되어야 한다. 2. 토양함수비(土壤合水比)가 30%(d.b.)일 때 볏짚의 감김량(量)이 최소직(最少直)를 나타내었으며 경운(耕耘)날의 진입각(進入角)이 $55^{\circ}$ 이상(以上)일 때 볏짚의 감김현상(現像)이 나타나지 않았다. 따라서 볏짚 시용답(施用沓)의 Rotary 경운작업(耕耘作業)은 건기(乾期)를 이용(利用)하여 작업(作業)해야 할 것으로 사료(思料)된다. 3. 볏짚의 절단(切斷)길이가 30cm 이고 경운(耕耘)날의 궤적진입각(軌跡進入角)이 $55^{\circ}$ 이상(以上)일 때 볏짚의 감김량(量)이 없었으며 볏짚의 절단(切斷)길이는 30cm 정도(程度)가 볏짚 시용답(施用沓)의 Rotary 작업가능(作業可能) 최장(最長)길이며 볏짚의 절단(切斷)길이가 30cm 이상(以上)일 때는 Rotary 경운작업(耕耘作業)에 불리(不利)하다. 4. Rotary 전진속도(前進速度)가 증가(增加)하연 볏짚의 감김량(量)도 완만(緩慢)하게 증가(增加)하였으며 볏짚이 시용(施用)된 답(沓)의 Rotary 작업(作業)은 저속 1 단 (0.35m/s)이 좋은 것으로 사료(思料)된다.

  • PDF

불규칙파-해저지반-혼성방파제의 상호작용에 의한 지반과 구조물의 동적응답에 관한 수치시뮬레이션 (II) (Numerical Simulation of Dynamic Response of Seabed and Structure due to the Interaction among Seabed, Composite Breakwater and Irregular Waves (II))

  • 이광호;백동진;김도삼;김태형;배기성
    • 한국해안·해양공학회논문집
    • /
    • 제26권3호
    • /
    • pp.174-183
    • /
    • 2014
  • 해양 및 해안구조물 하부의 해저지반에 장시간 지속적인 고파랑이 작용하는 경우 진동성분과 잔류성분으로 구성되는 과잉간극수압의 증가에 따른 유효응력의 감소로 인하여 해저지반내에 액상화의 가능성이 나타나고, 일단 액상화가 발생되면 그의 진행에 따라 구조물의 침하 혹은 전도에 의해 종국적으로 구조물이 파괴될 가능성이 높아지게 된다. 본 연구에서는 2차원수치파동수로를 혼상류해석과 불규칙파동장으로 확장한 수치해석법을 적용하여 불규칙파동장하에서 해저지반상 및 혼성방파제의 표면상에서 시간변동의 동파압과 유속에 의한 전단응력을 산정하고, 그 결과를 지반의 동적거동을 정밀하게 재현할 수 있는 유한요소법에 기초한 탄소성해저지반응답용의 수치해석프로그램에 입력치로 적용하여 불규칙파동장에서 해저지반내에서 과잉간극수압 및 유효응력의 시공간적인 변화, 이로 인한 액상화, 그리고 지반의 시간변형과 케이슨의 시간변위 및 변위가속도 등을 정량적으로 평가한다. 이로부터 혼성 방파제 전면 및 후면 하부의 해저지반내에서 액상화 가능성을 확인할 수 있었고, 이에 따라 액상화된 토립자는 흐름에 대한 저항력을 상실하므로 액상화된 지반은 세굴가능성이 클 것으로 판단된다. 또한, 액상화된 지반은 강도의 현저한 저하로 구조물의 진동변위가 증폭되고, 더불어 혼성방파제의 안정성에 큰 영향을 미칠 것으로 예상된다. 여기서, 본 연구의 전체 내용을 지면관계상 두 부분으로 나누며, 전반부를 (I)로 하여 구조물의 동적변위와 변위가속도 및 지반변형을 중심으로 다루고, 후반부를 (II)로 하여 지반내에서 간극수압의 시간변동, 액상화 및 유효응력경로 등을 상세히 다루며, 본 연구는 후반부인 (II)에 해당한다.

불규칙파-해저지반-혼성방파제의 상호작용에 의한 지반과 구조물의 동적응답에 관한 수치시뮬레이션 (I) (Numerical Simulation of Dynamic Response of Seabed and Structure due to the Interaction among Seabed, Composite Breakwater and Irregular Waves (I))

  • 이광호;백동진;김도삼;김태형;배기성
    • 한국해안·해양공학회논문집
    • /
    • 제26권3호
    • /
    • pp.160-173
    • /
    • 2014
  • 해양 및 해안구조물 하부의 해저지반에 장시간 지속적인 고파랑이 작용하는 경우 진동성분과 잔류성분으로 구성되는 과잉간극수압의 증가에 따른 유효응력의 감소로 인하여 해저지반내에 액상화의 가능성이 나타나고, 일단 액상화가 발생되면 그의 진행에 따라 구조물의 침하 혹은 전도에 의해 종국적으로 구조물이 파괴될 가능성이 높아지게 된다. 본 연구에서는 2차원수치파동수로를 혼상류해석과 불규칙파동장으로 확장한 수치해석법을 적용하여 불규칙파동장하에서 해저지반상 및 혼성방파제의 표면상에서 시간변동의 동파압과 유속에 의한 전단응력을 산정하고, 그 결과를 지반의 동적거동을 정밀하게 재현할 수 있는 유한요소법에 기초한 탄소성해저지반응답용의 수치해석프로그램에 입력치로 적용하여 불규칙파동장에서 해저지반내에서 과잉간극수압 및 유효응력의 시공간적인 변화, 이로 인한 액상화, 그리고 지반의 시간변형과 케이슨의 시간변위 및 변위가속도 등을 정량적으로 평가한다. 이로부터 혼성방파제 전면 및 후면 하부의 해저지반내에서 액상화 가능성을 확인할 수 있었고, 이에 따라 액상화된 토립자는 흐름에 대한 저항력을 상실하므로 액상화된 지반은 세굴가능성이 클 것으로 판단된다. 또한, 액상화된 지반은 강도의 현저한 저하로 구조물의 진동변위가 증폭되고, 더불어 혼성방파제의 안정성에 큰 영향을 미칠 것으로 예상된다. 여기서, 본 연구의 전체 내용을 지면관계상 두 부분으로 나누며, 전반부를 (I)로 하여 구조물의 동적변위와 변위가속도 및 지반변형을 중심으로 다루고, 후반부를 (II)로 하여 지반내에서 간극수압의 시간변동, 액상화 및 유효응력경로 등을 상세히 다루며, 본 연구는 전반부인 (I)에 해당한다.

1980년대 민중미술론의 기원과 형성 (The Origin and Formation of Korean Public Art Theories in the 1980s)

  • 최열
    • 미술이론과 현장
    • /
    • 제7호
    • /
    • pp.37-64
    • /
    • 2009
  • The theories of Korean Public Art originated by the artists who were against dictatorship and they associated with democratic politicians. They criticized the Fine art that were supported by the dictatorship and gave their efforts for restoration of 'resistance paintings(against dictatorship)', 'proletarian painting', 'realism painting'. In addition, they participated new social ideology(democracy) movement and demonstrated for their rights in arts. These became the main kernel the public art theory was initiated. The public artists splitted into several different parts and participated in the democratic social movement as well as the art movement for freedom. They opened various art exhibitions within different genre, diverse space for various art section such as an exhibition hall, a factories, a university, or a congregation square. Furthermore, the public art theorists published their divergent views through newspaper/broadcasting or unauthorized printed materials. Most of the public artist and the theorists kept their relationship strongly until 1985, the time when 'National Arts Association' started. In 1983 and 1984, they were clearly separated into two parts; artists(move only in art museums) and activists(move in public spaces like school, convention square etc). Their ideological separation also took out national problems. The division; professional artists and armatures, became the social issue as a social stratification matter. And in creating method, there are also other conflicts; critical realism, and public realism as well as western painting and traditional one. These kinds of separation and conflicts made different Public artists associations, under divergent names; 'Reality and Speak'(R&S), 'KwangJu Art Association', 'Durung', 'Dang(Land)', and 'Local Youth Students Association'. In addition, their ideology and pursuit toward art movements were very difference. However, the differences and conflicts weakened When the oppression of democratic education from new dictatorship(Pres. Jun, Doo Hwan) came out. In August. 1985 the government opened to the public so called, 'The draft of School stabilization law'(Hankwon Anjung Bup) to control the teachers' rights and that initiated bigger street demonstration and conflicts between police and educators. In November.1985, assembly meeting of National Arts Association in democracy opened as 'ONE' combined organization. In this presentation, I'd like to summarize the stream of art movement until 1984, and clarify the main art theories that lead the Public Art Movements in 1980s. The main theories in 1980s are crucial because they become the origin of public art theories. This presentation started with O,youn's "Hyunsil Dong In the first declaration" and explained the absent of practice in 1970s. In addition, Won, Dong Suk 's theory was mentioned as all over struggles in theories before 1980s. GA and R&S 's founding declarations in 1970s were the start of public art theorists' activities and this article reported the activities after the declarations. First, realism base on the consciousness of reality. Second, practice art democratization based on the ideology. Third, the subject of public art movement based on understanding people's social stratification structure. Fourth, the matters of national forms and creative ways in arts based on showing reality. Fifth, the strong points in arts that the practitioners accepted. About the public art theories around 1984, I discussed the dividing point of public art theories that were shown in 'generation theory', 'organization theory', and 'popularization theory' by the practitioners. The public realism theory that subjects the contradiction of reality and point out the limits of critical realism not only showing the new creative ways but also giving the feeling of solidarity to the public art activist groups. After that, public art movements expressed 'Dismentlement of Capitalism' and 'Public revolution'. In addition, the direction of public art movements were established strongly. There were various opinions and views during the start and formation of the public art theories. The foundation of theorists activities derived from the practitioners who had the concept based on stratification and nationalism. The strong trend of group division spreaded out by practitioners who opened art work together in factories, universities, squares and rural areas. Now many lively active practitioners are gone to the other field not related with arts, and others join into professional art field not public art one with unknown reason. The theorists have the same situation with the practitioners. It means to me that theory always have to be based on the practice.

  • PDF

콩씨스트선충(線蟲) 저항성품종(抵抗性品種) 육성(育成)에 관(關)한 연구(硏究) (Selection of Soybean Cultivars Resistant to Soybean Cyst Nematode, Heterodera glycines)

  • 최영연;김동근;최동로
    • 한국응용곤충학회지
    • /
    • 제25권1호
    • /
    • pp.53-61
    • /
    • 1986
  • 콩씨스트선충(線蟲)에 대(對)한 저항성품종육성(抵抗性品種育成)을 위하여 경북, 충북, 전남 3 개도 13지역(地域)에서 콩씨스트선충(線蟲)의 race를 조사(調査)한 결과(結果), Race 1 이 1계통(系統) Race c가 1계통(系統) 그리고 Race 5가 11계통(系統)으로 우리나라에서는 Race 5가 우점 race임을 알 수 있었다. 콩씨스트선충(線蟲) Race 5에 대(對)한 재래종(在來種)콩 203계통(系統)에 대(對)하여 포장저항성검정결과(圃場抵抗性檢定結果) 재래종(在來種)은 계통번호(系統番號) 18, 21, 36, 38, 41, 42, 43, 45, 55, 59, 68, 72, 75, 79, 93, 94, 95, 98, 123, 131, 136, 146, 170, 174, 187, 190, 191 등 27 계통(系統)이 한뿌리당 씨스트의 수(數)가 10 개미만으로써 다른 계통(系統)에 비(比)하여 적게 증식(增植)되었고, 나머지 176계통(系統)은 많이 증식(增殖)되었다. 포장실험(圃場實驗)에서 비교적(比較的) 선충(線蟲)의 증식(增殖)이 적게된 27 계통(系統)을 선발(選拔)하여 Pot에서 재검사(再檢査)를 한 결과(結果) 계통번호(系統番號) 170(음성군, 조촌리(陰城那, 助村里)) 번이 한 주(株)당 씨스트의 수(數)가 10개로 중정도(中程度)의 저항성(抵抗性)을 나타냈고 계통번호(系統番號) 55(영풍군, 내림리(榮豊那, 內林里))번은 다른 계통(系統)에 비(比)하여 다소 선충(線蟲)의 증식(增殖)이 적게 되었으나 나머지 25계통(系統)은 모두 30개이상(個以上)으로 많이 증식(增植)되어 감수성(感受性)을 나타냈다. 그리고 도입품종(導入品種) 25종중(種中)에서는 Peking, IIlsoy, PI90763 등 3품종(品種)은 포장(圃場)과 Pot실험(實驗)에서 다같이 선충(線蟲)의 증식(增殖)이 전혀 되지않는 저항성(抵抗性)으로 나타났고 Custer. Delmar, Dyer, Jackson 등 4품종(品種)은 씨스트의 수가 10개미만으로 비교(比較的) 적게 증식(增殖)되어 중정도(中程度)의 저항성(抵抗性)을 나타냈으나 나머지 18품종(品種)은 감수성(感受性)을 나타냈다. 수량성(收量性)을 검사(檢査)한 재래종중(在來種中)에서는 계통번호(系統番號) 170번이 역시 주당분지수, 주당협수 주당협중, 100립에 있어서 무감염구(無感染區)에 비(比)하여 감수율(減收率)이 각각(各各) 0%, 1.8%, 1.2%, 1.7% 로서 외국(外國)에서 저항성품종(抵抗性品種)으로 알려진 Peking, PI90763 과 같은 경향을 나타냈다. 그리고 계통번호(系統番號) 55, 75, 187번은 다른 계통(系統)에 비(比)하여 다소 낮은 감소율(減少率)을 나타냈다. 도입종중(導入種中)에는 Peking 과 PI90763 이 주당분지수 주당협수, 주당협중 및 100립중에서 모두 1.6% 이하의 낮은 감소율(減少率)을 나타냈으나 Illsoy 는 주당협수와 주당협중에서 3.8% 및 3.4%의 다소 높은 감소율(減少率)을 나타낸 한편 Custer, Delmar, Dyer, Jackson 등은 비교적 감소율이 높게 나타났다.

  • PDF

Metaflumizone을 포함한 몇 가지 약제의 파밤나방(Spodoptera exigua)에 대한 독성검정 (Toxicological Effects of Some Insecticides against Welsh Onion Beet Armyworm (Spodoptera exigua))

  • 강은진;강명기;서미자;박선남;김철웅;유용만;윤영남
    • 한국응용곤충학회지
    • /
    • 제47권2호
    • /
    • pp.155-162
    • /
    • 2008
  • 파를 가해하는 대표적인 해충인 파밤나방은 남부지방에서 피해가 심하며, 파 이외에도 많은 과채류 및 채소류를 가해함으로서 매년 많은 경제적인 손실을 유발하고 있다. 파밤나방은 세계적으로 약제에 대한 저항성이 강한 해충으로 알려져 있으며, 국내에서도 방제가 어려운 해충으로 인식되고 있고, 이를 방제하기 위하여 많은 살충제들이 등록되어 있다. 본 연구에서는 곤충에 서로 다른 작용기작을 가지고 있는 약제인 metaflumizone과 chlorfenapyr, indoxacarb, flufenoxuron, emamectin benzoate 등 4종의 살충제들을 선별하여 실내와 야외 포장에서 파밤나방에 대한 살충력을 살펴보고 이를 평가하였다. 약제에 대한 독성을 평가하기 위하여 사용된 파밤나방은 알과 1령에서 6령까지의 유충, 그리고 번데기를 대상으로 하였다. 파밤나방 알에 대한 시험에서 알에는 직접적인 독성작용을 하지 못하지만, 알에서 깨어난 유충이 알껍데기를 먹음으로 해서 결과적으로는 파밤나방의 개체수를 감소시킬 수 있을 것으로 보인다. 알에서 부화한 24시간 후의 1, 2령 유충들은 약제에 대한 감수성이 매우 높았으며, 유충의 영기가 높아질수록 치사율이 감소하였다. 한편, chlorfenapyr와 emamectin benzoate의 경우에는 어린 유충에서 노령의 유충에 이르기까지 고른 사망률을 나타내고 있었고, fluffnoxuron의 경우에는 어린 유충에는 치사율이 낮았으나, 노령 유충으로 성장하면서 치사율이 높게 나타나고 있었다. 한편 포장에서 살충제를 살포한 포장에서 약제 처리 10일 후 방제가를 조사한 결과 처리한 약제 모두 87.2에서 90.5%로 비교적 높을 방제가를 보이고 있었다.

설비공학 분야의 최근 연구 동향: 2014년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2014)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제27권7호
    • /
    • pp.380-394
    • /
    • 2015
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

토마토 잿빛곰팡이병균 약제저항성 간이 판별법 (Simple Method to Discriminate the Fungicide Resistant Botrytis cinerea Strain in Tomatoes)

  • 이문행;이희경;김성은;이환구;이순계;유승헌;김영식;김상우;이윤수
    • 한국균학회지
    • /
    • 제41권3호
    • /
    • pp.172-180
    • /
    • 2013
  • Botrytis 선택배지(BSM)를 이용하여 토마토 포장에서 꽃잎의 감염시기를 착과 직후, 착과 25일 후, 착과 45일 후로 나누어 조사하였던 바 착과 직후의 꽃잎에서는 65%의 감염률을 보였으나 착과 25일 후의 꽃잎에서는 87%, 45일 후의 꽃잎에서는 100%의 감염률을 보였다. 착과 후 시간이 지날수록 잿빛곰팡이병균의 꽃잎 감염율은 증가하였다. 한편, 토마토 품종별 꽃잎의 감염시기를 개화 전, 개화 후, 착과 후로 구분하여 조사하였던 바 전체적으로 개화 전에 비하여 개화 후 시간이 지날수록 감염율이 급격히 증가하였으며, 일반토마토 3품종의 감염율이 방울토마토에 비하여 현저히 높았다. 즉 일반토마토의 착과 후 꽃잎 감염율이 70~80%인데 비하여 방울토마토의 꽃잎 감염율은 20~45%였다. 일반토마토 및 방울토마토 포장에서 잿빛곰팡이병균의 포자 비산량을 BSTM을 이용하여 조사한 결과 토마토 생육기간이 길어질수록 비산 포자량은 증가하였으며 특히 일반 토마토품종에서 잿빛곰팡이병의 발생 이후에 급격하게 증가하였다. 그러나 포장 내의 병원균 포자비산량의 증가에도 불구하고 방울토마토는 잿빛곰팡이병의 발병이 매우 적었다. BSM 및 BSTM을 이용한 잿빛곰팡이병 약제저항성균 간이검정법의 포장 적용시험을 통하여 바 이들의 활용가능성을 확인하였으며, 부여 및 익산지역 12농가에서 8개 약제를 공시하여 실증시험을 실시하였던 바 fluazinam 및 diethofencarb+carbendazim 혼합제가 주로 방제에 적합한 약제로 판정되었다. BSM을 이용한 kit는 잿빛곰팡이병이 발생하기 이전에 조기에 약제 저항성 병원균 판별이 가능하나 8개의 약제배지에 접종할 경우 2시간 정도의 시간이 필요하다. BSTM을 활용한 kit는 배지를 설치 후 24시간이 지난 후 수거하기 때문에 사용은 간편하나 잿빛곰팡이병이 발생하기 이전에 설치하면 낙하 포자량이 적어 약제저항성균 판별에 어려움이 있을 것이라 생각된다.

오이 균핵병에 대한 몇 가지 살균제의 방제 효과와 살균제에 대한 균핵병균의 감수성 정도 조사 (The control effect of some fungicides against cucumber sclerotinia rot and the sensitivity of sclerotinia isolates to fungicides)

  • 김명옥;민지영;최우봉;강범관;박성우;최경자;박창식;조광연;김흥태
    • 농약과학회지
    • /
    • 제9권4호
    • /
    • pp.429-436
    • /
    • 2005
  • 오이에 균핵병을 일으키는 Sclerotinia sclerotiorum은 $25^{\circ}C$에서 균사의 생육이 가장 왕성하였으며, 병원성 실험을 위해 오이 열매를 이용한 실내 검정 실험의 경우 동일한 온도에서 병원성이 가장 강한 것으로 나타났다. 분리한 모든 Sclerotinia sclerotiorum 균주는 오이 절편 접종법과 상처 접종법을 사용한 실내 검정에서 모두 강한 병원성을 나타냈지만, 오이 절편 접종법의 경우는 상처 접종법과는 다르게, 균주와 환경, 처리한 살균제 간에 차이를 볼 수 없을 정도로 병원성이 강하여 실내 검정법으로는 적합하지 못하였다. 오이 절편접종법과 상처접종법을 사용하여 dichlofluanid와 carbendazim과 diethofencarb의 혼합제의 병 발생 억제 효과를 조사한 결과, 오이 절편접종법에서는 500과 $3.0{\mu}g/mL$의 처리구에서 14.3과 42.8%의 낮은 효과를 보였지만, 상처 접종법에서는 동일한 농도에서 100와 92.5%의 우수한 발병 억제 효과를 보였다. 두 살균제는 포장에서도 우수한 효과를 보였는데, $100{\mu}g/mL$의 혼합제와 $825{\mu}g/mL$의 dichlofluanid는 병 발생 억제 효과가 각각 91.1과 82.9%이었다. 충남 연기 지역의 오이 시설 재배지에서 분리한 37개의 S. sclerotioum 균주는 7가지의 살균제에 대한 저항성 모니터링을 실시하여 균주들의 평균 EC50값을 구하였는데, fenhexamid는 $0.13{\mu}g/mL$, 병원균의 세포막에서 과산화반응을 일으켜 병원균을 사멸시키는 것으로 알려진 procymidon과 iprodione은 0.18과 $0.24{\mu}g/mL$, Tubulin 단백질의 중합 반응을 억제하는 것으로 보고된 carbendazim과 carbendazim과 diethofencarb의 혼합제는 0.13과 $0.05{\mu}g/mL$, 보호용 살균제로 알려진 iminoctadine과 dichlofluanid는 평균 $EC_{50}$ 값이 1.94와 $8.95{\mu}g/mL$이었다. 특별히 dichlofluanid의 경우는 $EC_{50}$값의 범위가 0.001에서 $21.54{\mu}g/mL$ 사이의 넓은 범위에 분포하였지만, 포장에서의 사용 농도가 $1,650{\mu}g/mL$인 것을 감안한다면 저항성균의 출현은 확인하지 못하였다. 충북의 연기 지역에서는 7가지 살균제에 대하여 저항성을 뚜렷하게 나타내는 균핵병균은 발견하지 못하였다.

내도복 다수성 겉보리 신품종 "혜당" (A New Six-rowed and Covered Barley Cultivar, "Hyedang" with Lodging Tolerance and High-Yield)

  • 김양길;백성범;김정곤;이미자;김미정;김홍식;박종철;현종내;서세정;김시주;김재철;정재현;최재성
    • 한국육종학회지
    • /
    • 제41권4호
    • /
    • pp.630-634
    • /
    • 2009
  • 1995년에 내재해 다수성 특성을 지닌 "수원300호"를 모본으로, 조숙 호위축병저항성인 "하가네무기//CI08397/하가네무기"를 부본으로 인공교배하여 수량성이 높고 도복이 강한 우수 겉보리 계통 "익산407호"를 선발하였다. 2005년부터 3개년간 지역적응시험을 실시한 결과 답리작 적응성이 높으며, 광지역성으로서 수량성이 높고, 도복 등 재해에 강한 특성과 효소력가가 높은 계통으로 2007년 국립종자원에 "혜당"으로 출원하였다. 신 육성품종의 특성은 다음과 같다. 1. 6조 겉보리이며 파성은 III이며, 이삭의 밀도가 밀한 편이며 까락이 길지만 탈망성이 좋다. 2. 출수기와 성숙기는 전작, 답리작에서 대조품종보다 각각 3일 빠른 조숙종이다 3. 흰가루병은 올보리와 비슷하다. 보리호위축병에는 바이러스 strain이 I형인 나주와 IV형인 진주에서는 저항성을 나타내었으나 III형인 익산에서는 중정도의 저항성을 나타내었으며, 내한성과 내도복성은 올보리보다 다소 강하였다. 4. 간장(80 cm)은 올보리보다 8 cm 짧았으며, 수장은 약간 크고, $m^2$당 수수는 696개로 올보리보다 23개, 1수립수는 51개로 1개 많았으며, 천립중은 올보리보다 0.4 g 작은 대립종이며, 1L중은 다소 가벼웠다. 5. 단백질 함량과 ${\beta}$-glucan 함량은 올보리와 비슷하였고, 정맥률과, 입백도는 높았다. 엿기름의 효소력가는 올보리보다 30 DP 높았다. 6. 수량성은 올보리에 비해 전작(4.17 MT/ha)에서 23%, 답리작(4.27 MT/ha)에서 9% 각각 증수되었다.