• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.434-439
• /
• 1997

It this paper, the piezoelectric and electro-induced strain properties of (P $b_{1-}$2x/3/B $i_{x}$ )[N $i_{1}$3/N $b_{2}$3/)$_{0.4}$( $Ti_{0.6}$Z $r_{0.4}$)$_{0.6}$] $O_3$ceramics (x=0, 0.005, 0.02) were investigated with the substitution of B $i^{3+}$, and the feasibility of the application for bimorph actuator was evaluated by measuring the dynamic properties of the piezoelectric bimorph fabricated with above ceramics. Dielectric constant was enhanced with the increase of B $i^{3+}$ substitution, and appeared the maximum value of 5032 at x=0.01 composition. Increasing the substitution of B $i^{3+}$, the electromechanical coefficient( $k_{p}$ , $k_{31}$ ) was increased up to the substitution of 0.5 mol% B $i^{3+}$, showed the value of 0.656, 0.439, respectively. The piezoelectric constant( $d_{33}$ $d_{31}$ ) had the highest value of 344, 825 with the substitution of 0.5 mol% B $i^{3+}$. The strain, generated by 60 Hz AC electric field, had the largest value of 1200($\times$10$^{-6}$ $\Delta$1/1) in the composition with the substitution of 0.5 mol% B $i^{3+}$. The dynamic properties of the bimorph actuator, fabricated with the composition substitution of 0.5 mol% B $i^{3+}$, showed the largest value of 325 $\mu$m at $\pm$150 V square pulse. square pulse.are pulse..

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.5 s.311
• /
• pp.36-43
• /
• 2006

In this paper we present a new high-speed parallel multiplier for Performing the bit-parallel multiplication of two polynomials in the finite fields $GF(2^m)$. Prior to construct the multiplier circuits, we consist of the MOD operation part to generate the result of bit-parallel multiplication with one coefficient of a multiplicative polynomial after performing the parallel multiplication of a multiplicand polynomial with a irreducible polynomial. The basic cells of MOD operation part have two AND gates and two XOR gates. Using these MOD operation parts, we can obtain the multiplication results performing the bit-parallel multiplication of two polynomials. Extending this process, we show the design of the generalized circuits for degree m and a simple example of constructing the multiplier circuit over finite fields $GF(2^4)$. Also, the presented multiplier is simulated by PSpice. The multiplier presented in this paper use the MOD operation parts with the basic cells repeatedly, and is easy to extend the multiplication of two polynomials in the finite fields with very large degree m, and is suitable to VLSI. Also, since this circuit has a low propagation delay time generated by the gates during operating process because of not use the memory elements in the inside of multiplier circuit, this multiplier circuit realizes a high-speed operation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.62-73
• /
• 2010

A bird is needed efficient conservation through habitat management, as the representative of an organism to evaluate the steady of complex ecosystem. So, this study will offer the useful basic data for preserving habitat from now on, as presenting a estimating model with the GIS program which selected factors effecting the habitat of a forest-dwelling bird in Changwon. As the resort of the survey, the number of forest-dwelling birds living in the 135 survey sites were 5 order, 15 family, 26 species and 922 individual. Also, as the result of making habitat analysis into a predict model, 'NDVI', 'Distance to valley', 'Distance to mixed forest' and 'Area of field' were significant and they had R-squares of 51.3%. Next, as the resort of researching the accuracy of Model, it was a reasonable prediction, as the correlation coefficient is 0.735 and MAPE is 20.7%, and a predict map of habitat was made with the model. This map could predict species diversity of no investigated areas and could be an useful basic data for preserving habitat, as an on-the-spot survey.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.102-109
• /
• 2011

In this study, in order to develop ultra rapid hardening mortar(URHM) for tunnel repairs using bottom ash of low recycle ratio and Admixture as Eco concept, watertightness and durability properties of URHM on temperature condition of construction field were performed. Test result, seepage quantity and water absorption coefficient regarding watertightness of URHM were as in the following : series II > series I. Seepage quantity for the standard condition were smaller than low temperatures. all specimens were satisfied below 20g as standards of seepage quantity on KS F 4042. Because of the decrease of unit cement content by to replacement of blast furnace slag, the neutrlization resistance for durability properties was reduced. The result of alkali resistance and acide resistance, compressive strengths for specimens soaked in calcium hydroxide solution of seriesI were lower than compressive strengths for specimens not soaked. On the other hand, the case of series II show that the deterioration of compressive strengths for specimens was not almost showed. Compressive strengths of specimens soaked were similar with specimens not soaked except series II-C in $5^{\circ}C$. Therefore, specimens using both blast furnace slag and bottom ash were good in alkali resistance and acide resistance.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.187-192
• /
• 1991

This study was carried out to estimate the stand volume for Japanese larch(Larix leptolepis) by Strand sampling method. The data collected for this study were based on the 380 sample plots from the field survey, which were distributed in the major part of Korea(Kyeongi, Kangweon, Chungbuk, Chungnam, Chunbuk and Kyeongbuki), and the plotless sampling instrument such as dendrometer, spiegel relascope and tele-relascope were used. The procedure for this study is summarized briefly as follows : 1. There were not only significant differences between volume estimation by Strand sampling method and that by plot survey method, and the relationship was y=bx, where b approached nearly 1. Therefore, the stand volume of Japanese larch could by estimated by Strand sampling method. 2. The value measured by three different plotless sampling instruments did not showed any significant differences between instruments and observers, density and instruments, and ground slope and instruments. 3. With the stand volume, basal area height showed the highest correlation and stand form height, average height, basal area per ha correlated with the volume in thier orders. 4. The best fitted equation of stand volume estimation with basal area height by relascope was as follow. log V=-0.0375+0.8910 log GH-1.5946 1/GH Stand volume table also was obtained using the above estimeated equation. 5. The relationship between estimated value and actual value was Y=bx, where b was nearly 1. The correlation coefficient was very high and the percentage of estimated error was 4.5%.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.455-463
• /
• 1996

Studies were carried out to determine the effect of sulfur dioxide on leaf injury and yield of ten soybean cultivars. Plants were fumigated with 2.0 ppm of $SO_2$ for 4 or 8 h in a closed-top field chamber. In the comparison of foliar injury, Paldalkong and Eunhakong were more susceptible to $SO_2$ than Bogwangkong, Jangsukong, and Jangkeungkong. Correlations between chlorophyll contents, peroxidase activity, and stomatal resistance of leaves and foliar susceptibility were insignificant. However, significant correlations $(r=-0.611^{\ast})$ were found between superoxide dismutase activity and foliar injury rates. Dry weight, number of pods and total grains were significantly reduced by $SO_2$ fumigation but plant height, number of nods and weight of 100 grains were not affected. Yield reduction rates were higher in Eunhakong and Paldalkong than in Bogwangkong and Jangkeungkong. A liniar relationship was found between foliar injury rate and the percent crop loss with a significant coefficient of b=-1.17 in the susceptible cultivar of Paldalkong, but Bogwangkong, insusceptible cultivar, showed lower value of -0.165.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.213-223
• /
• 2003

We estimated the Moho depth of Korean Peninsula from gravity anomalies and digital elevation model. The satellite radar altimetry-derived global free-air gravity model was used to ensure the homogeneity in both data and frequency domains of the original data. Two different methods were implemented to calculate the Moho depth; the wavenumber correlation analysis (Kim et al., 2000a) and the power spectrum analysis. The former method calculates depth-to-the-Moho by correlating topographic gravity effect with free-air gravity anomaly in the wavenumber domain under the assumption that the study area is not isostatically compensated. The latter one, on the other hand, considers the different density layers (i.e., Conrad and Moho), using complete Bouguer gravity anomaly in the Frequency domain of the Fourier transform. The correlation coefficient of the two Moho model is 0.53, and methodology and numerical error are mainly responsible for any mismatch between the two models. In order to integrate the two independentely-estimated models, we applied least-squares adjustment using the differenced depth. The resultant model has mean and standard deviation Moho depths of 32.0 km and 2.5 km with (min, max) depths of (20.3, 36.6) kms. Although this result does not include any topographic gravity effect, however, the validity of isostasy and the role of local stress field in the study area should be further studied.

• Journal of environmental and Sanitary engineering
• /
• v.5 no.2
• /
• pp.105-116
• /
• 1990

Seungbong Island is situated about 100km away Inchon Port in the western sea of the Korean Peninsula. Field investigations were conducted for two days each from June 30 through July 1, 1981 and from August 20 through 21, 1981. The results obtained are summarized as follows: Plants growing in this island consist of a total of 193 species (70 families, 151 genera, 170 species, 22 varieties and 1 forma). Pinus thunbergii was confirmed to be the dominant species. The natural degree observed in this island was high, as a whole. The coefficient of ferny plants (Pte-Q) is 0.95, lower than grass. Atractylodes japonica Koidz., Miscanthus sinensis Anders. var. purpurascense Rendle, and Rhododendron mucronulatum Turz. are distributed mainly on the forest bed of Pinus thunbergii. The poor distribution of Chenopodium album var. centrorubrum Makino, Setaria viridis (L.) Beauv., Amaranthus mangostanus Linne is considered attributable to the phenomenon of allellopathy caused by a chemical substance secreted from the leaves of Pinus thunbergii. The component ratio of species in this island is lower than that of other islands due probably to the small area of arable land and grassland. The poor growth of plants in the forest of Pinus thunbergii, the dominant species in this island, seems to be attributed to the low relative light intensity of the forest. Seaside plants consisting of a total of 7 species were distributed mainly in the vicinity of sandy beaches. Naturalized plants comprising a total of 11 species were relatively diversified in the number of species.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.126-130
• /
• 1983

This study was desinged to find out the effects of soil physical properties on root development of barley. Barley fields were selected in consideration of drainage class and texture. Soil hardness were measured at the field. Soil bulk density, air ratio and root distribution were obtained from the core samples. 1. The amount of roots were increased and the root were distributed deeper layers with better drainage class and finer soil texture. 2. Soil hardness was related to soil bulk density, and the regression coefficient was increased with clay content (Clay ; $r=0.837^{**}$, Clay loam ; $r=0.678^*$, and Sandy loam ; $r=0.654^*$). 3. There was a highly negative correlation ($r=-0,846^{**}$) between bulk density of subsoils and amount of roots and the root developments were markedly reduced in soil bulk density of $1.4g/cm^3$. 4. Bulk density of subsoils was decreased with worse soil drainage and finer texture. Especially, in case of clayey soil at imperfectly or moderately drained soils, the air phase was less than 20% and the barley growth was worse. 5. Root development were related to hardness in surface, bulk density and ok phase in 10-30cm layer, and air phase in 30-50cm layer.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.193-208
• /
• 2008

This study aims to analyse the ripple effect of Physical distribution service industry on national economy using input-output tables and present the results as data for political plans in this field. For the analysis, it uses input-output tables developed and published by Sank of Korea in 1998, 2000, and 2003. To sum up the results, production inducement effects are 1757 for railroad transport, 1688 for road transport and 1617 for loading. Import inducement effects of assistant services, loading, storage, warehouse and other transport-related services are low while the effects of water and air transport are high as follows: 0.679 and 0.558 respectively. Then, added-value inducement effects are presented as follows: 0.841 for railway transport, 0.828 for road transport, 0.962 for transport assistant service, 0.939 for loading, 0.938 for storage and warehouse, and 0.942 for other transport-related services. Sensitivity dispersion index of road transport is high while that of water transport, storage and warehouse is low. And influence coefficient of railway and road transport is high while that of water and air transport is low. In respect to the employment structure of Physical distribution service industry, 744,000 are employed for road transport industry, which is the largest number, 19,000 for air transport and 20,000 for assistant services, which is the least number.