Park, Sah-Hoon;Park, Jong-Seong;Lee, Min-Su;Shin, Jung-Woo
The Korean Journal of Physiology and Pharmacology
/
제6권4호
/
pp.193-197
/
2002
In spite of abundant anatomical evidences for the fiber connection between vestibular nuclei and inferior olivary (IO) complex, the transmission of vestibular information through the vestibulo- olivo-cerebellar climbing fiber pathway has not been physiologically established. The aims of the present study were to investigate whether there are IO neurons specifically responding to horizontal rotation and also in which subregions of IO complex these vestibularly-activated neurons are located. The extracellular recording was made in 68 IO neurons and responses of 46 vestibularly-activated cells were analyzed. Most of the vestibularly-activated IO neurons responded to signals of vertical rotation (roll), while a small number (13/46) of recorded cells were activated by horizontal canal signal (yaw). Regardless of yaw-sensitive or roll-sensitive, vestibular IO neurons were excited, when the animal was rotated to the side contralateral to the recording side. The gain and excitation phase were very similar to otolithic or vertical-canal responses. Histologic identification of recording sites showed that most of vestibular IO neurons were located in ${\beta}$ subnucleus. Electrical stimulation of a HSC evoked an inhibitory effect on the excitability of the ipsilateral IO neurons. These results suggest that IO neurons mainly in the ${\beta}$ subnucleus receive vestibular signals from semicircular canals and otolithic organs, encode them, and transmit vestibular information to the cerebellum.
The mechanical property of a carbon-fiber-reinforced plastic (CFRP) is subjected to two elements, carbon fiber and polymer resin, in a first step and the selection of multi-layered structure is second one. Many combination of fabric layers, i.e. plainweave, twillweave, can be derived for candidates of test specimen used for a basic mechanical components so that a reliable identification of dynamic nature of possible multi-layered structures are essential during the development of CFRP based component system. In this paper, three kinds of multi-layered structure specimens were prepared and the dynamic characteristics of service specimens were conducted through classical modal test process with impact hammer. In addition, the design sensitivity analysis based on transmissibility function was applied for the measured response data so that the response sensitivity for each resonance frequency were compared for three CFRP test specimens. Finally, the evaluation of CFRP specimen over different multi-layered fabric structures are commented from the experimental consequences.
Modeling of physically non-linear behavior becomes more and more important for the analysis of SFRC structures in practical applications. From this point of view we will present an effective, three-dimensional constitutive model for SFRC, that is also easy to implement in commercial finite element programs. Additionally, the finite element analysis should only require standard material parameters which can be gained easily from conventional experiments or which are specified in appropriate building codes. Another important point is attaining the material parameters from experimental data. The procedures to determine the material parameters proposed in appropriate codes seem to be only approximations and are unsuitable for precise structural analysis. Therefore a finite element analysis of the test itself is used to get the material parameters. This process is also denoted as inverse analysis. The efficiency of the proposed constitutive model is demonstrated on the basis of numerical examples and their comparison to experimental results. In the framework of material parameter identification the idea of a new, indirect tension testing procedure, the "Modified Tension Test", is adopted and extended to an easy-to-carry-out tension test for steel fiber reinforced concrete specimens.
In this study, DAQ and TRA modules were applied to the CFRP single specimen testing method using AE. A method for crack identification in CFRP specimens based on k-mean clustering and wavelet transform analysis are presented. Mode I on DCB under vertical loading and mode II on 3-points ENF testing under share loading have been carried out, thereafter k-mean method for clustering AE data and wavelet transition method per amplitude have been applied to investigate characteristics of interfacial fracture in CFRP composite. It was found that the fracture mechanism of Carbon/Epoxy Composite to estimate of different type of fractures such as matrix(epoxy resin) cracking, delamination and fiber breakage same as AE amplitude distribution using a AE frequency analysis. In conclusion, the presented results provide a foundation for using wavelet analysis as efficient crack detection tool. The advantage of using wavelet analysis is that local features in a displacement response signal can be identified with a desired resolution, provided that the response signal to be analyzed picks up the perturbations caused by the presence of the crack.
본 연구에서는 대구근대역사관 소장 인력거의 재질별 분석을 통해 다양한 재질이 복합적으로 사용되는 근·현대문화재의 재료를 확인하고, 보존 및 관리의 기초 자료를 구축하고자 하였다. 금속, 목재, 섬유, 도료를 대상으로 P-XRF, 수종분석, 섬유동정, 도막층 분석(층상 구조, SEM-EDS, FTIR)을 실시한 결과, 금속은 구리(Cu), 아연(Zn), 황동(Brass)과 철(Fe)로 확인되었다. 목재는 상수리나무류, 삼나무, 대나무아과, 비자나무속이 식별되었으며, 이 중 삼나무는 일본 자생종으로 인력거 제작 당시 일본에서 목재를 수입하여 제작하고, 근대 일본 인력거의 제작 양식에 영향을 받은 것으로 추정되었다. 섬유는 면(Cotton)을 주로 사용하였으며, 일부는 가죽(Leather)도 확인되었다, 도막층은 캐슈(Cashew)를 사용하여 1회 이상 도포한 것으로 관찰되었으며, 특히 인력거 몸체부는 섬유층, 토회층, 도료층, 채색층이 중복되어 관찰되고, 성분이 다른 적색 안료(산화철 및 진사)층이 관찰된 점을 보아, 과거 일부 보수 및 보존처리가 진행된 것으로 판단된다.
국립중앙박물관 소장 대혜보각선사서는 1387년에 제작된 고려시대 서책으로 2005년 입수 되었으며 전체적인 손상이 매우 심각하였다. 이에 장황 특성과 과학적 분석을 통해 제작기법과 재료를 조사하였고 이를 토대로 전체 보존처리가 진행되었다. 서지학적 특성으로 장황형태는 오침안선장본(五針眼線裝本)이며 판식은 광곽이 사주단변(四周單邊), 계선은 무계(無界)이다. 보존처리는 기본 형태 조사 와 보존처리 과정을 살폈다. 형태는 겉표지와 원표지, 면지, 내지로 구성되어 있으며 내지는 0.04~0.07mm로 일반적인 책지에 비해 매우 얇은 특성을 보인다. 표지와 내지 모두 열화로 인한 부서짐이 심각한 상태로 판단되어 전체 해체를 통해 보존처리가 진행되었다. 보존처리는 해체-클리닝-결손부 보강-스캔-제책 과정을 거쳤으며 오동나무상자를 제작하여 보관하도록 하였다. 해체 시 내지와 책 끈의 시료를 채취하여 섬유식별을 진행하였다. 내지 섬유식별은 사프라닌과 C-stain 염색으로 식별하였다. 사프라닌 염색 결과 섬유벽이 두껍고 마디와 왜곡, 투명막이 확인되었고, C-stain 염색결과 탁한 적색을 띠고 있어 닥나무 섬유로 식별하였다. 책 끈은 단면이 편평한 원형의 형태이며 중앙부분에 루멘이 관찰되어 면섬유로 판별하였다.
Objectives : The roots of Dipsacus asper had been used as the herbal medicine "Cheon-Sokdan" in Korea. Moreover, the roots of Phlomoides umbrosa were used as "Han-Sokdan." In the present study, a comparative anatomical comparison of Cheon-Sokdan, Han-Sokdan, and Ilbon-Sokdan were conducted, because Ilbon-Sokdan, the roots of Dipsacus japonicus, was regarded as substitute of Cheon-Sokdan. Methods : For this study, permanent preparations were made using a paraffin embedding method. Anatomical features of these three Sokdans were observed using a light microscope. Results : The starch grains of parenchyma cells and the amounts of calcium oxalate crystals hardly differed among the three plants. Particularly, the longitudinally-sectioned vessels of the three plants showed a wide variety depending on the focal depth of the light microscope. Therefore, these features could not be considered as obligate criteria for distinguishing these plants. The shape of the xylem was linear in Cheon-Sokdan and Ilbon-Sokdan, whereas that in Han-Sokdan was wedge-shaped. The phloem of Cheon-Sokdan and Ilbon-Sokdan were rhomboid, whereas that of Han-Sokdan was thimble-like. Therefore, the shape of xylem and phloem appeared as good criteria for distinguishing Han-Sokdan from the other plants studied. Cheon-Sokdan and Ilbon-Sokdan showed characteristics similar in many parts. However, in the xylem of Ilbon-Sokdan, fiber bundles were more developed than those of Cheon-Sokdan. Therefore, the development of fiber bundles in xylem was considered suitable for distinguishing between Cheon-Sokdan and Ilbon-Sokdan. Conclusions : The identification-keys established in this study would be helpful for identifying microscopic features among the three Sokdans.
이 연구에서는 최근 사회기반시설물의 스마트 모니터링을 위하여 많은 관심을 받고 있는 광섬유 FBG형 가속도계와 MEMS형 가속도계의 적용성을 평가하고자 하였다. 이들의 성능을 비교하기 위하여 저주파수 영역에서 높은 민감도와 신뢰성을 가지고 있는 ICP형 가속도계를 스마트 센서와 동시에 모형구조물에 부착하여 소규모 진동대 실험을 수행하였으며, 계측된 응답을 이용하여 모드해석을 수행함으로써 간접적으로 계측자료의 신뢰성을 비교하였다. 계측자료로부터 구한 모드자료를 이용하여 진단빌딩의 층간 강성을 추정하였다. 추정된 강성의 신뢰성을 검증하기 위하여 기지의 질량을 추가하여 구조물의 특성을 변경시킨 후, 다시 진동대 실험을 수행하여 구한 실험모드해석 결과를 수치해석결과와 비교하였다.
Objective: Muscle fiber types, numbers and area are crucial aspects associated with meat production and quality. However, there are few studies of pig muscle fibre traits in terms of the detection power, false discovery rate and confidence interval precision of whole-genome quantitative trait loci (QTL). We had previously performed genome scanning for muscle fibre traits using 183 microsatellites and detected 8 significant QTLs in a White Duroc×Erhualian F2 population. The confidence intervals of these QTLs ranged between 11 and 127 centimorgan (cM), which contained hundreds of genes and hampered the identification of QTLs. A whole-genome sequence imputation of the population was used for fine mapping in this study. Methods: A whole-genome sequences association study was performed in the F2 population. Genotyping was performed for 1,020 individuals (19 F0, 68 F1, and 933 F2). The whole-genome variants were imputed and 21,624,800 single nucleotide polymorphisms (SNPs) were identified and examined for associations to 11 longissimus dorsi muscle fiber traits. Results: A total of 3,201 significant SNPs comprising 7 novel QTLs showing associations with the relative area of fiber type I (I_RA), the fiber number per square centimeter (FN) and the total fiber number (TFN). Moreover, one QTL on pig chromosome 14 was found to affect both FN and TFN. Furthermore, four plausible candidate genes associated with FN (kinase non-catalytic C-lobe domain containing [KNDC1]), TFN (KNDC1), and I_RA (solute carrier family 36 member 4, contactin associated protein like 5, and glutamate metabotropic receptor 8) were identified. Conclusion: An efficient and powerful imputation-based association approach was utilized to identify genes potentially associated with muscle fiber traits. These identified genes and SNPs could be explored to improve meat production and quality via marker-assisted selection in pigs.
This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.