• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.260-261
• /
• 2002

For Near-field Scanning Optical Microscopy measurements, the fiber tip is glued on the side of one of the tuning fork prongs vertically to its extended direction. Higher Q-factor is attainable in this geometry than in the arrangement with the fiber tip parallel to the prong. A simple mechanical design is applied to hold the fiber tip above the gluing point. The overall tuning fork-fiber tip assembly gives another advantage of the flexible Q-factor enhancement. With this treatment, Q-factor higher than 3000 is easily achievable. As an operating instance, a grating is scanned for its one dimensional topographical image.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.307-313
• /
• 2014

섬유보강 콘크리트의 균열 후 인장 거동을 예측하기 위해서는 균열면에 걸쳐 있는 섬유의 개수를 산정하는 섬유분포계수를 합리적으로 예측하는 것이 필요하다. 이 논문에서는 원형단면에서의 섬유분포계수를 분석하기 위해, 콘크리트 압축강도, 단면 크기, 섬유 종류 및 섬유혼입률 등을 변수로 강섬유보강 콘크리트 공시체를 제작하였으며, 제작한 공시체들을 타설 방향에 수직인 방향으로 절단한 후, 절단된 원형 단면에서의 섬유 개수로부터 섬유분포계수를 측정하였다. 측정 결과, 섬유가 타설면에 평행하게 분포할 확률이 증가함에 따라 실제 원형단면에서의 섬유분포계수가 일반적으로 알려진 0.5보다 작은 것으로 나타났다. 또한, 단위 면적 당 섬유 개수가 증가할수록 섬유분포계수가 감소하는 것으로 나타났다. 이 논문에서는 원형단면에서의 섬유분포계수를 합리적으로 예측하기 위해 섬유가 분포할 수 있는 각을 기하학적으로 분석하고, 이로부터 상세 모델과 단순화한 식을 유도하였다. 제안된 모델과 실험에서 측정된 섬유분포계수를 비교한 결과, 제안된 모델이 실제 원형단면에서의 섬유분포계수를 잘 예측하는 것으로 나타났다. 이 연구로부터 확보된 실험 결과 및 제안 모델은 향후 원형단면을 지닌 섬유보강 콘크리트 기둥 부재 등의 구조적 거동 연구에 매우 유용할 것으로 사료된다.

• Computers and Concrete
• /
• 제30권5호
• /
• pp.323-337
• /
• 2022

This paper proposes a numerical model to simulate the rotational behavior of steel fiber in fresh cement-based materials in the presence of a magnetic field. The results indicate that as the aspect ratio of fiber increases, the required minimum magnetic field intensity to make fiber rotate in viscous fluid increases. The optimal magnetic field intensity is 0.03 T for aligning steel fiber in fresh cement-based materials to ensure that the applying time of the magnetic field can be conducted concurrently with the vibrating process to increase the aligning efficiency. The orientation factor of steel fiber in cement mortar can exceed 0.85 after aligning by 0.03 T of the uniform magnetic field. When the initial angle of the fiber to the magnetic field direction is less than 10°, the magnetic field less than 0.03 T cannot make the fiber overcome the yield stress of fluid to rotate. The coarse aggregate in steel fiber-reinforced concrete is detrimental to the rotation and alignment of the steel fiber. But the orientation factor of ASFRC under the 0.03T of the magnetic field can also exceed 0.8, while the orientation factor of SFRC without magnetic field application is around 0.6.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.251-254
• /
• 2005

This study will have to define the shear strengthening effects of steel fiber in beam and column levels, as well as to suggest estimation method of maximum shear capacity of structural members. From review of literature surveys and perform structural member test results, following conclusion can be made; In beam level, steel fiber strengthening factor is suggested from the tensile splitting test results and beam test results. After suggesting shear capacity of beam without stirrups and beam with stirrups by proposed steel fiber strengthening factor, proposed equation is possible to evaluate the shear capacity of beam. In column level, with column test results and proposed steel fiber strengthening factor, shear capacity equation of steel fiber reinforced concrete in column is suggested.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.213-220
• /
• 2004

본 연구의 목적은 전단 보강근이 없는 강섬유 보강 콘크리트 보의 전단내력을 강섬유 계수를 이용하여 평가하기 위한 것이다. 이를 위하여 재료 및 부재 수준의 2단계 연구를 수행하였다. 기존 및 본 연구 결과에 의하면, 강섬유 보강 콘크리트의 주요 요인은 강섬유 계수로 평가되었으며, 이를 근거로 한 강섬유 보강계수가 제안되었다. 또한 기 제안된 전단내력식을 평가한 결과, 신성우 제안식이 강섬유 비보강 보의 내력을 적절히 평가하는 것으로 나타났다. 따라서 신성우 제안식에 강섬유 계수를 곱한 강섬유 보강 콘크리트의 전단내력식이 회귀분석에 의하여 제안되었다.

• 한국생활과학회지
• /
• 제19권2호
• /
• pp.389-398
• /
• 2010

This study examines the relationship between the concern about well-being lifestyle and the perceived image of Hanji fiber. A survey was conducted among male and female consumers aged 20 and over in Jeonju and Daejon from January 4th to 11th, 2008. A total of 168 responses were analyzed by using descriptive statistics, factor analysis, and ANOVA via the SPSS ver. 12. As a result, four factors were determined in the concern for a well-being lifestyle; product consumption, enjoying culture, using therapy and managing the household. The perceived image of Hanji fiber were classified into four elements; traditional, high-quality, functional and popular images. Among the factors of the concern for a well-being lifestyle and the perceived image of Hanji fibers, a partial relationship was observed. There is a positive relationship, especially between the product consumption factor of a well-being lifestyle and the high-quality and functional image of Hanji fiber. Also, there was a positive relationship between the factor of managing the household and the traditional image of Hanji fiber. However, the therapy interest factor of a well-being lifestyle was negatively related to the traditional image of Hanji fiber.

• 전자공학회논문지D
• /
• 제35D권6호
• /
• pp.15-20
• /
• 1998

Fiber dispersion을 이용한 소신호 응답특성으로부터 1.55㎛ strained MQW DFB 레이저의 linewidth enhancement factor α 및 fiber 분산을 측정하였다. 측정된 fiber 분산값은 16.766∼16.786ps/nm/km로 일반적인 단일모드 fiber의 분산값을 잘 나타내었다. 레이저의 실제 동작조건에서 α의 변화를 관찰하기 위하여 광출력의 변화에 따른 α의 변화를 측정하였는데 광출력 증가에 따라 α값도 선형적으로 증가함을 알 수 있었다. 이 결과로부터 아직까지의 어떤 측정보다도 정확히 non-linear gain에 의한 α의 변화를 설명할 수 있었다.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.73-78
• /
• 2004

The conventional SLT(Shear Lag Theory) which has been proven that it can not provide sufficiently accurate strengthening predictions in elastic regime when the fiber aspect ratio is small. This paper is an extented work to improve it by modifying the load transfer mechanism called NSLT(New Shear Lag Theory), which takes into account the stress transfer across the fiber ends and the SCF(Stress Concentration Factor) that exists in the matrix regions near the fiber ends. The key point of the model development is to determine the major controlling factor among the material and geometrical coefficients. It is found that the most affecting factor is the fiber/matrix elastic modulus ratio. It is also found that the proposed model gives a good result that has the capability to correctly predict the elastic properties such as interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.439-445
• /
• 2020

In the estimation of the aerosol single fiber efficiency using fibrous filters, there is a size range, where the particles penetrate most effectively through the fibrous collectors, and corresponding minimum single fiber efficiency. For small particles in which the diffusion mechanism is dominant, the Cunningham slip correction factor (C_c) affects the single fiber efficiency and the most penetrating particle size (MPPS). Therefore, for accurate estimation, C_c is essential to be considered. However, many previous studies have neglected this factor because of its complexity and the associated difficulty in deriving the appropriate parameterization particularly for the MPPS. In this study, the expression for the MPPS, and the corresponding expression for the minimum single fiber efficiency are analytically derived, and the effects of C_c are determined. In order to accommodate the slip factor for all particle-size ranges, C_c is simplified and modified. Overall, the obtained analytical expression for the MPPS is in a good agreement with the exact solution.

• 콘크리트학회논문집
• /
• 제14권4호
• /
• pp.474-482
• /
• 2002

본 연구의 목적은 섬유의 부착시험을 통하여 섬유의 파괴없이 최대 인발저항을 가지고 시멘트 모체 내에서 완전한 정착작용을하는 구조용 합성섬유의 최적형상과 최적형상함수를 도출하는데 있다. 7가지 다른 형상의 구조용 합성섬유를 조사하였고 부착시험을 수행하였다. 부착시험의 변수는 7가지의 다른 형상이고, 2종류의 시멘트 모르타르의 배합이다. 부착시험 결과, 7가지 다른 형상중 crimped type이 계면인성(인발에너지)와 인발하중에서 가장 우수한 성능을 보였다. Crimped type을 기본으로 하여 섬유의 주기와 높이를 바꾸어 부착시험을 실시한 결과 최적형상함수, D= $b^{{\alpha}ο{\alpha}}$ $h^{λ{\beta}}$ 를 도출하였다.