• Applied Biological Chemistry
• /
• v.35 no.1
• /
• pp.51-54
• /
• 1992

Analysis of chemical components in the cultivars of Korean figs(Ficus carical L.), Bongraesi and Seungjung Dauphone were performed. The results of analyses for Bongraesi and Seungjung Dauphine were found out to he moisture content of 88.70, 88.40%, protein 0.70, 0.72%, fat 0.31, 0.27%, fiber 1.12, 0.83%, ash 0.47, 0.44%, pectin 2.81, 2.71% and ascorbic acid 1.33, 1.67 mg%, respectively. The total and reducing sugar contents of two cultivars were 9.0%, 9.6% and 8.5%, 8.8% respectively. Glucose and fructose were major sugar components of figs. The organic acids in figs were mainly composed of citric and tartaric acid. The amino nitrogen contents of the two cultivars were 47.6 mg/100g in Bongraesi and 38.7 mg/100g in Seungjung Dauphine. It was found that major amino acids in figs were serine, aspartic acid, proline and alanine. The content of these fraction in total amino acid were shown 62.8% in Bongraesi and 64.0% in Seungjung Dauphine, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.4
• /
• pp.249-255
• /
• 2017

BACKGROUND: Globally, mulberry (Morus sp.) is exploited for feeding leaf to silkworms in order to obtain silk fiber or for animal feedstock production. Also, mulberry fruit is known to a by-product that was produced from mulberry tree after harvesting leaves for silkworm rearing, as a yield and consumption of mulberry fruit was increased, it has been fixing to a newincome crop. Mulberry leaves and fruits are used for the health benefits of human beings. Mulberry contains various bioactive components, such as alkaloids and flavonoids. Mulberry flavonoids are an important part of the diet because of their effects on human nutrition. The flavonoids in mulberry leaf and fruit of 'Suhyang'(Morus alba L.) were determined. METHODS AND RESULTS: Flavonoids for mulberry leaf and fruit of 'Suhyang' were analysed using ultrahigh performance liquid chromatography coupled with diode array detection and quadrupole time-of-flight mass spectrometry (UPLC-DAD-QTOF/MS)technique. An UPLC-DAD-QTOF/MS system was used, and identification of mulberry leaves constituents was carried out on the basis of the complementary information obtained from LC spectra, MS ions, and MS/MS fragments. The mulberry leaf (16 flavonoids) and fruit (9 flavonoids) were isolated and analyzed from Suhyang using UPLC-DAD-QTOF/MS chromatogram. To the best of our knowledge, Quercetin 3-O-(6"-O-malonyl) glucoside and quercetin 3-O-rutinoside (rutin) was detected on the highest content in leaf and fruit, respectively and further research will be devoted to evaluate their biological activity. CONCLUSION: Obtaining information about the concentration of functional materials in mulberry leaves could contribute to the development and promotion of processed, functional products and offer possible industrial use of 'Suhyang', holding promises to enhance the overall profitability of sericulture.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.741-748
• /
• 2019

As the occurrence of harmful algal blooms (HABs) have become severe in precious water resources, the development of efficient harmful algae treatment methods is considering as an important environmental issue for sustainable conservation of water resources. To treat HABs in water resources, various conventional physical and chemical methods have been utilized and showed treatment efficiency, However, these methods can lead to discharging of cyanotoxins into the water bodies by chemical or physical algal cell lysis or destruction. Thus, to overcome this limitation, the development of safe HABs treatment methods is required. In the present study, adsorption technology was investigated for the removal of harmful algal species, Microcystis aeruginosa from aqueous phases. Industrial waste biomass, Corynebacterium glutamicum biomass was valorized as biosorbent (PEI-modified alginate/biomass composite fiber; PEI-AlgBF) for M. aeruginosa through immobilization with alginate matrix and cationic polymer (polyethylenimine; PEI) coating. The functional groups characteristic of PEI-Alg was determined using FT-IR analysis. By adsorption process used PEI-AlgBF, 52 and 67% of M. aeruginosa could be removed under the initial density of M. aeruginosa 200×10⁴ cells mL^-1 and 50×10⁴ cells mL^-1, respectively. As the increasing surface area of PEI-AlgBF, the removal efficiency was increased. In addition, we could find that adsorptive removal of M. aeruginosa has occurred without any M. aeruginosa cell lysis and destruction.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.178-194
• /
• 2011

Due to the population growth of the old aged, Korea is also entering into an aging society. But a research on the pattern design to the old aged is much to be desired. The purpose of this research is to design skirt pattern fitted for each body type by categorizing the lower body type of the old aged woman. For the way of research, categorized the body type by using the female measuring size from the 65 years old to 99 years old which has been measured by the Korean body size research as an assay data, and base on this data, a suitable skirt pattern for each body type of the old aged woman was designed by practicing the exterior evaluation. The data analysis was done with the statistical treatment in SPSS 12.0, and the results are as follows. The lower body type of the old aged woman were divided into the type 1. The circumference article is the biggest compared to the height article regarding to the lower body type of the old aged woman. The type 2. The height article and the circumference and thickness articles are the poorest. The type 3. The height article is the biggest and the hip width and calf circumference are thicker than the waist width. The type 4. The height article is the lowest and the waist width is thicker instead the hip and leg are thinner. In type 1, The pattern was modified by increasing 1cm a length of the dart and raising up 1.2cm at the cross point between side line and waist line. In type 2, the basic pattern was used, and in type 3, using the outline of the basic pattern however, increased 1cm a length of the dart and modified the amounts of dart by handling the art in curve, and modified the waist line to be more three-dimensional curves by raising up 1 cm at the cross point between waist line and side line and falling down 0.5cm at the cross point between the back center line and the waist line. In type 4, modified the amounts of front and back dart to 1.25cm, and raised up 0.8cm at the cross point between side line and waist line, and modified the waist line and the side seam line in a gentle curve by reducing circumference of the skirt tail to 1cm from the side seam line.

• Korean Journal of Food Science and Technology
• /
• v.40 no.5
• /
• pp.586-592
• /
• 2008

In this study, the nutritional components and functional activities of Sasa borealis leaf tea were evaluated. The proximate compositions were as follows; moisture 5.68%, crude protein 16.38%, crude fat 4.68%, nitrogen free extracts 32.37%, crude fiber 32.36%, and ash 8.53%, respectively. The mineral elements were as follows: K 2,133.83, Ca 1,144.09 and P 543.00 mg%, respectively. The amino acid contents of the Sasa borealis leaf tea were very rich in proline (1,275.26 mg/100 g) and deficient in cystine (71.49 mg/100 g). The major fatty acid components were linoleic acid (50.52%), palmitic acid (18.52%), and oleic acid (14.16%). Finally, based on our sensory evaluations, the $80^{\circ}C$ extracted Sasa borealis leaf tea evidenced the best overall quality. The contents of total phenol and total flavonoids of the 80% methanol and hot water extracts were 15.09, 7.69 mg/g and 12.03, 6.12 mg/g, respectively. The DPPH and $ABTS^+$ radical scavenging activities of the 80% methanol extract from Sasa borealis leaf tea were 86.87% and 83.85% at a concentration of 1.25 mg/mL. The 80% methanol and hot water extracts evidenced reducing power and inhibitory effects against acetylcholinesterase in a dose-dependent manner.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2020

In 2005, Urban railway seismic design was introduced in Rep. Of Korea, and many studies on seismic performance evaluation and reinforcement methods were conducted. In accordance with the Enforcement Decree of the Earthquake Disaster Countermeasures Act issued in March 2009, during April 2010 to October 2013, some of local governments established detailed evaluation and reinforcement measures for seismic performance of the urban railway underground structure. Afterwards, the seismic performance reinforcement of the existing urban railway structures was conducted for the sections that a long period of used until the end of 2018, and the reinforcement works are carried out by various methods using the previously studied methods. However, various reinforcing materials and construction methods using have been studied, but the classification research on the construction methods currently applied to reinforcement construction of urban railways is insufficient. The purpose of study is to analysis the cases currently applied to seismic reinforcement construction and to show the characteristics of each construction method, the reasons for its application and problems.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.178-189
• /
• 2011

Tests and analyses were performed in this study to assess the shear strength of Reinforced Concrete(RC) members strengthened by the Near Surface Mounted(NSM) technique in shear, which is drawing attention as an alternative to the Carbon Fiber Reinforced Polymer(CFRP) bonding strengthening technique. Four-point bending tests were performed on 7 RC specimens without any shear reinforcement. The test variables such as the inclination of CFRP strip (45 degrees and 90 degrees), and the spacing of CFRP strip (250mm, 200mm, 150mm, 100mm) were considered. Through the testing scenarios, the effect of each test variable on the failure mode and the shear strength of the RC members strengthened by the NSM technique in shear were assessed. The test results show that the specimens with CFRP strips at 45 degrees go to failure as a result of the strip fracture, but the specimens with CFRP strips at 90 degrees go to failure as a result of the slip of strips. Strips at 45 degrees was the more effective than strips at 90 degrees, not only in terms of increasing beam shear resistance but also in assuring larger deformation capacity at beam failure. In addition, the RBSN analysis appropriately predicted the crack formation and the load-displacement response of the RC members strengthened by the NSM technique in shear.

• Journal of the Korean Dietetic Association
• /
• v.9 no.4
• /
• pp.316-325
• /
• 2003

This study was carried out to compare the characteristics of the over weight elementary school students with those of desirable-weight children. Anthropometric parameters such as height, weight, BMI, body fat percentile, triceps skin fold thickness were measured. Dietary assessment and blood analysis were performed. The average ages of over weight children and desirable-weight children were 10.9$\pm$2.5 and 10.2$\pm$2.8 years, respectively. The means body fat percentile of over weight children and desirable-weight children were 27.5$\pm$3.7% and 20.2$\pm$3.8%. respectively. Plasma levels of TG, total cholesterol, LDL cholesterol, and HDL cholesterol of over weight children and desirable-weight children were 179.3$\pm$30.0, 104.9$\pm$26.6, 52.3$\pm$6.7 and 178.3$\pm$84.1 mg/dl, and those of desirable-weight children were 86.1$\pm$43.5, 183.7$\pm$16.5, 101.0$\pm$2.1 and 67.7$\pm$20.0 mg/dl, respectively. Plasma TG levels of over weight children were significantly higher than those of desirable weight children. On the other hand, plasma HDL-cholesterol levels of over weight children were significantly lower than those of desirable-weight children. Plasma levels of GOT and GPT were in normal range in both group however, GPT level of over weight children was higher than that of desirable weight children. Plasma levels of albumin, globulin, and BUN were all in normal range and no differences were found in both groups. Hematologic data did not show any difference between two groups except WBC, RBC and Hgb levels which were significantly higher in over weight group than those of desirable-weight children. Daily nutrients intake of over weight children and desirable-weight children were very similar and they were around the Korean RDA levels for each nutrients. However the intake of calcium of both groups were little over 50% of RDA. The consumption of dietary fiber was very low and the cholesterol intake was very high showing that the habitual meals of Korean school children were not well balanced.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2498-2508
• /
• 1993

$Al/SiC/Al_{2}O_{3}$ hybrid composites are fabricated by squeeze infiltration method. From the misconstructive of $Al/SiC/Al_{2}O_{3}$ hybrid composites fabricated by squeeze infiltration method, uniform distribution of reinforcements and good bondings are found. Hardness value of $Al/SiC/Al_{2}O_{3}$ hybrid composites increases linearly with the volume fraction of reinforcement because SiC whisker and $Al_{2}$O$_{3}$ fiber have an outstanding hardness. Optimal aging conditions are obtained by examining the hardness of $Al/SiC/Al_{2}O_{3}$ hybrid composites with different aging time. Tensile properties such as Young's modulus and ultimate tensile strength are improved up to 30% and 40% by the addition of reinforcements, respectively. Failure mode of $Al/SiC/Al_{2}O_{3}$ hybrid composites is ductile on microstructural level. Through the abrasive wear test and wear surface analysis, wear behaviour and mechanism of 6061 aluminum and $Al/SiC/Al_{2}O_{3}$ hybrid composites are characterized under various testing conditions. The addition of SiC whisker to $Al/SiC/Al_{2}O_{3}$ composites gives rise to improvement of the wear resistance. The wear resistance of $Al/SiC/Al_{2}O_{3}$ hybrid composites is superior to that of Al/SiC composites. The wear mechanism of aluminum alloy is mainly abrasive wear at low speed range and adhesive and melt wear at high speed range. In contrast, that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is abrasive wear at all speed range, but severe wear when counter material is stainless steel. As the testing temperature increases, wear loss of aluminum alloy decreases because the matrix is getting more ductile, but that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is hardly varied. Oil lubricant is more effective to reduce the wear loss of aluminum alloy and $Al/SiC/Al_{2}O_{3}$ hybrid composites at high speed range.

• Environmental Analysis Health and Toxicology
• /
• v.21 no.1 s.52
• /
• pp.45-56
• /
• 2006

This study was conducted to investigate seasonal distributions of fine particles ($PM_{2.5}$) and associated polycyclic aromatic hydrocarbons (PAHs) at three cities. $PM_{2.5}$ samples were collected on glass fiber filters at urban (Chuncheon), metropolitan (Seoul), and industrial complex sites (Ulsan) from September, 2002 to February, 2004 using the Andersen FH 95 Particulate Sampler. About five 24-hour samples were collected from each site per season. The filters were analyzed for mass and six selected PAHs concentrations. $PM_{2.5}$ concentrations were the highest either in winter or spring, which could be attributed to the increase of fossil fuel combustion in winter or the transport of yellow sand to the Korean peninsula from China in spring, respectively. Regional $PM_{2.5}$ concentrations were higher in the order of Seoul>Chuncheon>Ulsan without statistical difference among cities. The filters were extracted using dichloromethane in an ultrasonicator and analyzed for six PAHs (anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, and benzo[a]pyrene) with HPLC. Total PAHs concentrations were statistically different among seasons in each site, and the highest concentrations were observed in winter at each sampling site. For total samples collected, the median total PAHs concentrations in Chuncheon ($4.6ng/m^3$) and Seoul ($4.4ng/m^3$) were approximately two times higher than that in Ulsan ($2.1ng/m^3$). Chrysene was a component found in the highest proportion among total PAHs at each site. Carcinogenic risks calculated based on the BaP toxic equivalency factors (TEFs) over the whole sampling period were higher in the order of Chuncheon>Seoul>Ulsan. This study suggests that the atmosphere of Chuncheon is contaminated with particulate matter and PAHs at the levels equivalent to those of Seoul and that an appropriate measure needs to be taken to mitigate human health risks from inhalation exposure to airborne fine particles.