• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.712-722
• /
• 2021

This study presents a method for conserving shamanistic spirits in Chiseonggwang Buddha. Scientific investigation has revealed that these spirits have been subject to degeneration as a result of severe exfoliation and pollution. The materials and preservation treatment techniques used in create these shamanistic spirits were identified through visual inspection and using appropriate scientific equipment. The different types of background paper, background material, and color pigments used in create the shamanistic spirits were analyzed using a colorimeter, stereoscopic microscope, and SEM-EDS techniques. The analysis revealed that the pulp paper was used as the background and synthetic fiber polyester as the background material. In addition, the study of the pigment revealed that the color components were all synthetic, except for red lead [Pb₃O₄] and oyster shell white [CaCO₃]. Moreover, it was confirmed that the green pigment, identified as emerald green [Cu(C₂H₃O₂)₂.3Cu(AsO₂)₂], was a major component of shamanistic spirits in the late 19^th century. The shamanistic spirits in Chiseonggwang Buddha were conserved by identifying raw materials and pigments through this detailed analysis.

• Membrane Journal
• /
• v.32 no.2
• /
• pp.116-125
• /
• 2022

In this experiment, an α-Al₂O₃ ceramic hollow fiber was used as a support, and a hydrogen membrane plated with Pd and Pd-Ag was manufactured through electroless plating. The Pd-Ag membrane was annealed at 500℃ for 10 h to form an alloy of Pd and Ag. It was confirmed that it became a Pd-Ag alloy through EDS (Energy Dispersive X-ray Spectroscopy) analysis. Also, the thickness of the Pd, Pd-Ag plating layer was measured to be about 8.98 and 9.29 ㎛ through SEM (Scanning Electron Microscope) analysis respectively. Hydrogen permeation experiment was performed using the H₂ gas and mixed gas (H₂ and N₂) in the range of 350~450℃ and 1-4 bar using the prepared hydrogen membrane. Under the H₂ gas condition, the Pd and Pd-Ag membrane has a flux of up to 21.85 and 13.76 mL/cm²·min and also separation factors of 1216 and 361 were obtained in the mixed gas at 450℃ and 4 bar conditions respectively.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.243-253
• /
• 2022

Using non-destructive analytical methods, we identified the material characteristics of two gold fabric artifacts excavated from the Cheongsong Sim clan (Bugeum Wonsam, Jikgeum Chima), including the artifact condition, fiber type, surface contamination, and metallic threads. We found that the artifacts were buried and had turned brown; thus, we were unable to determine their original color. The fiber type was determined to be silk from cocoons, based on scanning electron microscopy, Fourier transform infrared (FT-IR) analyses of Amide I, II, III, and IV peaks, and color reactions Further, the FT-IR and X-ray fluorescence (XRF) analyses identified the white and black stains as natural resin hydrolyzed substances, such as lipids and proteins, that occurred as microbial decomposition due to body decay. Finally, the XRF analyses identified the thin gold layer of the metallic yarn as gold (Au). According to the FT-IR data and the color reaction to the metallic yarn medium, the adhesive component of the medium was a product of-Amides I, II, III, and 3000 cm^-1 within Amides A and B (an animal type), respectively. Thus, the medium was identified as Hanji (Korean paper), which is made from domestically produced Broussonetia kazinoki fibers.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.3
• /
• pp.579-588
• /
• 2018

There are the plastic resin, fiber and the single metal among materials. There is also the inhomogeneous material whose durability is improved as the composite material with the property of light weight. This study notices the composite material with light weight of CFRP. The strength properties of stainless steel and aluminum which have been used generally are compared and analyzed each other with CFRP. The compact tension specimen of the same standard by each material were designed and the simulation tensile analyses were carried out. As the study result, the maximum deformation, maximum stress and maxium strain energy are shown to be about 0.0148mm, 59.104MPa and 0.00529mJ respectively in case of CFRP specimen model. The maximum deformation, maximum stress and maxium strain energy were shown to be about 0.0106mm, 42.22MPa and 0.002699mJ respectively at stainless steel. It could be checked that the maximum deformation, maximum stress and maxium strain energy of aluminum specimen model were shown to be about 0.023mm, 33.29MPa and 0.00464mJ respectively at stainless steel. Therefore, the results at this study are thought to be applied with the basic data on the strength property of CFRP composite material.

• Composites Research
• /
• v.36 no.3
• /
• pp.186-192
• /
• 2023

Recently, in the field of railway vehicles, interest in the use of composite materials for weight reduction and transportation efficiency is increasing. Accordingly, research and commercialization development to apply composite materials to various vehicle parts are being actively conducted, and evaluation is conducted centering on post-measurement such as mechanical performance evaluation of finished products to verify quality when composite materials are applied. However, the analysis of heat and stress generated during the molding process of composite materials, which are factors that greatly affect manufacturing quality, is insufficient. Therefore, in this study, in order to verify the molding quality of composite parts for railway vehicles, the molding quality analysis was conducted for the two types of composite interior panels (laminate panel and sandwich panel) that are most actively used. To this end, temperature and strain changes were monitored during the molding process by using an FBG fiber optic sensor, which is easy to apply to the inside of the composite, and the residual strain value generated after molding was completed was measured. As a result, it was confirmed that overheating and excessive residual stress did not occur, thereby verifying the excellent molding quality of the composite interior panel for railway vehicles.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.6
• /
• pp.765-774
• /
• 2007

Aging rate of rural area in our country is relatively high compared to that of the urban area. Thus, the introduction of meal service for the elderly residing in the rural area is necessary for their better living quality. Food habit, health and the nutritive intake conditions during the busy farming season were surveyed and comparative analysis of dietary intake for the introduction of meal service in pavilion of the elderly living in Chungnam, Kangwon, Jeonnam and Kyungbuk was performed for basic reference data of meal service introduction to the pavilion of the elderly in rural area. In general subject, the male elderly had a significant difference in marital state and showed that 79.4% was married and 20% was separated by death(P<0.05). In allowance, there were no significant difference but most of them lived with less then three hundred thousand won and especially, female lived with less then one hundred thousand won. In health state, the female elderly showed significant difference on difficulty with every day activity but with small trouble although they had to prepare their own meal(P<0.05). The condition dental health conditions of the female elderly had a significant difference showing bad conditions in following order; Kangwon(48%)>Chungnam(38.1%)>Kyungbuk(22.9%)>Jeonnam(22.5%)(p<0.05). The female elderly showed a significant difference in usage of denture and number of the female elderly without using the denture were very high(p<0.05). In nutrition intake condition, amount of sodium was very high but intakes of fiber and calcium were relatively 1ow(P<0.05). Meal service introduction in the pavilion of the elderly is suggested for the improvement of the life quality of the elderly in rural area. When developing the menu for them, conditions such as shortage of the fiber and calcium in diets, the dental conditions should be considered.

• Korean Journal of Veterinary Research
• /
• v.64 no.3
• /
• pp.21.1-21.9
• /
• 2024

Canine adenovirus type 2 (CAV-2) is a common causative agent of respiratory disease in canines. There have been no reports of CAV-2 variants isolated from raccoon dogs. This study aims to investigate the biological and genetic characteristics of a novel Korean CAV-2 variant. Madin-Darby canine kidney cells were used to isolate the CAV-2 variant from 45 fecal swab samples. Diagnostic tools such as the cytopathic effect (CPE) assay, electron microscopy, polymerase chain reaction, and immunofluorescence and hemagglutination assays were used to confirm the presence of the CAV-2 isolate. A cross-virus neutralization assay was performed to verify the novelty of this CAV variant. Genetic analysis was performed using nucleotide sequences obtained through next-generation sequencing. The isolate was confirmed to be a CAV-2 variant based on the aforementioned methods and designated CAV2232. The number of bases in the fiber and E3 genes of CAV2232 were 1,626 and 414, respectively. Phylogenetic analysis of the fiber and E3 genes confirmed that CAV2232 was classified into a different clade from the known CAV-1 and CAV-2 strains. Mice inoculated with the CAV2232 vaccine developed high virus neutralization antibody titers of 1,024 (2¹⁰) against CAV2232, while mice inoculated with CAV-1 and CAV-2 vaccines had low virus neutralization antibody titers of 12.9 (2^3.7) and 6.5 (2^2.7), respectively, against CAV2232. CAV2232 isolated from wild raccoon dog feces was classified as a novel CAV-2 variant. CAV2232 may therefore be used as an antigen for new vaccine development and serological investigations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1369-1379
• /
• 2014

The physicochemical characteristics and antioxidant activities of leaf, stem, and root of ginger (Zingiber officinale R.) were determined. Nutrient composition, reducing sugar, saponin, mineral, heavy metal, total phenolic and total flavonoid contents, and antioxidant activities based on DPPH radical scavenging and FRAP assay were measured. Catechins, gingerols, shogaols, and capsaicin compositions were also determined by HPLC. The contents of water, proteins, fats, carbohydrates, fiber, and ash from ginger root were 6.4, 6.8, 3.2, 65.4, 7.3, and 18.2%, respectively. Crude fiber contents of leaf and stem were 4~5 times higher than those of root (P<0.05), and reducing sugar content of stem was about 3 times higher than those of root. Crude saponin contents were in the order of stem

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.6
• /
• pp.923-933
• /
• 1995

Background: Pleural abnormality is the the most common respiratory change caused by asbestos dust inhalation and also develop other asbestos related disease after cessation of asbestos exposure. So we conducted epidemiologic study to investigate if the pleural abnormality is associated with pulmonary function change and what factors are influenced on pulmonary function impairment. Methods: Two hundred and twenty two asbestos workers from 9 industries using asbestos in Korea were selected to measure the concentration of sectional asbestos fiber. Ouestionnaire, chest X-ray, PFT were also performed. All the data were analyzed by student t-test and chi-square test using SAS. Regressional analysis was performed to evaluate important factors, for example smoking, exposure concentration, period and the existence of pleural thickening, affecting to the change of pulmonary function. Results: 1) All nine industries except two, airborn asbestos fiber concentration was less than an average permissible concentration. PFT was performed on 222 workers and the percentage of male was 88.3%, their mean age was $41{\pm}9$ years old, and the duration of asbestos exposure was $10.6{\pm}7.8$ yrs. 2) The chest X-ray showed normal(89.19%), pulmonary Tb(inactive)(2.7%), pleral thickening (7.66%), suspected reticulonodular shadow(0.9%). 3) The mean values of height, smoking status, concentration of asbestos fiberwere not different between the subjects with pleural thickening and others, but age, cumulative pack-years, the duration of asbestos exposure were higher in subjects with pleural thickening. 4) All the PFT indices were lower in the subjects with pleural thickening than in the subjects without pleural thickening. 5) Simple regression analysis showed there was a significant correlation between $FEF_{75}$ which is sensitive in small airway obstruction and cumulative smoking pack-years, the duration of asbestos exposure and the concentration of asbestos fiber. 6) Multiple regression analysis showed all the pulmonary function indices were decreased as the increase of cumulative smoking pack-years and especially in the indices those are sensitive in small airway obstruction. Pleural thickening was associated with reduction in FVC, $FEV_1$, PEFR and $FEF_{25}$. Conclusion: The more concentration of asbestos fiber and the more duration of asbestos exposure, the greater reduction in $FEF_{50}$, $FEF_{75}$. Therefore PFT was important in the evaluation of early detection for small airway obstruction. Furthermore pleural thickening without asbesto-related parenchymal lung disease is associated with reduction in pulmonary function.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.