• 산업경영시스템학회지
• /
• 제36권3호
• /
• pp.1-7
• /
• 2013

This paper is a case study of reliability assessment with field warranty data of Clutch Master Cylinder (CMC) in hydraulic clutch system. We estimate lifetime distribution using field warranty data which contain much useful information for understanding reliability of the system in the real-world environments. However, the estimated parameters are far from existing reference values, which seems to be caused right censored field warranty data. To modify the parameters, we use the information of the durability test which is performed to verify that the lifetime of the item meets the required level. After that, we can observe that the modified parameters are closer to the existing reference values. This case study shows a possible idea to supplement lack of right censored field warranty data and its applicability.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.50-55
• /
• 2016

In this paper, we have analyzed the electrical characteristics of 1200V trench gate field stop IGBT and have compared to NPT planar type IGBT and NPT planar field stop IGBT. As a result of analyzing, we obtained superior electrical characteristics of trench gate field stop IGBT than conventional IGBT. To begin with, the breakdown voltage characteristic was showed 1,460 V and on state voltage drop was showed 0.7 V. We obtained 3.5 V threshold voltage, too. To use these results, we have extracted optimal design and process parameter and designed trench gate field stop IGBT. The designed trench gate IGBT will use to inverter of renewable energy and automotive industry.

• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.551-554
• /
• 2015

This paper was analyzed electrical characteristics of super junction IGBT with super junction field rings. As a result of super junction IGBT with super junction field rings, we obtained 3,300 V breakdown voltage and good thermal characteristics. we obtained shrinked chip size because field ring was decreased than field ring for conventional IGBT, too. And we fabricated super junction IGBT with super junction field rings. As a result of measuring fabricated chip, we obtained 3,300 V breakdown voltage. The fabricated devices were replaced thyristos using high voltage conversion, sufficiently.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1698-1702
• /
• 2018

We simulate the light transmission through an extremely small nanoscale aperture having a 10 nm diameter punctured in a metal film positioned at the center of a plasmonic bull's eye grating. A considerable directive emission of transmitted light with a divergence angle of 5.7 degrees was observed at $10{\mu}m$ from the nanohole opening at the frequency of surface plasmon polariton excitation, an confirmed by measuring the distance dependent transmission amplitude. Observations of the electric field in cross-sectional, near-field, and far-field views near-field enhancement associated with the surface plasmon excitation, and the interference of the electric field light through the nanohole in the near-field region is responsible for such a considerable directive emission.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.183-184
• /
• 2005

In this paper. a new small size Lateral Trench Electrode Power IGBT is proposed. The entire electrode of proposed LIGBT is placed in trench oxide. The forward blocking voltage of the proposed LIGBT is improved by 1.6 times with that of the conventional LIGBT. The forward blocking voltage of proposed LIGBT is 500V. At the same size. a increase of the forward blocking voltage of about 1.6 times relative to the conventional LIGBT is observed by using TMA-MEDICI which is used for analyzing device characteristics. Because the electrodes of the proposed device are formed in trench oxide. the electric field in the device are crowded to trench oxide. We observed that the characteristics of i the proposed device was improved by using TMA-MEDICI and that the fabrication of the proposed device is possible by using TMA-TSUPREM4.

• 한국전자파학회논문지
• /
• 제20권2호
• /
• pp.174-182
• /
• 2009

본 논문에서는 삼각형 패치와 서브 패치를 이용하여 국내 UHF RFID 대역에서 근거리장 영역과 원거리장 영역을 겸용하여 사용할 수 있는 안테나를 제안하였다. 제안된 안테나는 FR-4 기판에 마이크로스트립 패치로 인쇄되어 대량생산이 용이한 평면 구조이며, UHF RFID 주파수 대역(912 MHz)에서 동작하도록 설계하였다. 삼각형 패치를 이용하여 정면방향에서 원형편파 특성을 가지고 동작하며 서브 패치를 삽입하여 근거리장 영역에서 강하고 균일한 수직 자계를 형성 할 수 있도록 하였다. 측정 결과 제작된 안테나는 개구면에서 3 cm 떨어진 근거리장 영역에서 -25 dBA/m 이상의 수직 자계를 형성하며, 정면방향 원거리장에서 AR<3 dB의 원형편파를 복사하며 6 dBi의 복사 이득을 보였다.

• 공학교육연구
• /
• 제14권2호
• /
• pp.68-75
• /
• 2011

The purpose of this research is to search for directions in engineering education development in a knowledge-based society in terms of 'engineering ethics educatio'. Engineering ethics education, having been recognized as an inter-disciplinary research field between engineering and philosophy, is a field that has been a major issue in countries that execute engineering education accreditation. And engineering ethics education has been a peculiar research field focused on EAC(Ethics across the Curriculum). Therefore, this study has deduced several results by critically reviewing the extant EAC-related literatures. First, accomplishments by various researchers that may well quoted as the leader of engineering ethics study and education or the educational achievements of Kanazawa Institute of Technology in Japan are considerably substantial. However, the EAC discussions thus far still raise numerous barriers and unsolved issues. Second, the discussion of EAC thus far comprehends limitations such as a shortage of the recognition of inter-disciplinary study in the field of education and insufficient participation by education majors. Third, the engineering and philosophy field experts who have been leading EAC discussions have been pursuing integrated education courses either consciously or unconsciously. Fourth, EAC discussions may expand by again illuminating the intent of integrated education courses in terms of 'education and the study of education', and this new facet can be summed up with a new term, EAL, which stands for 'Ethics across the Living.'

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.969-976
• /
• 2014

Nowadays, it is required for naval ships to estimate 3D underwater radiated noise pattern in all direction at peak frequencies of hull vibration for the reduction of being detected and doing the effective operation. For this purpose, the numerical method has to be developed to calculate 3D underwater radiated noise pattern with experimental data. It is very difficult to obtain the experimental data for the real ship. Alternative to get the experimental results is to use NAH(near-field acoustic holography) in acoustic tank with experimental model. Application of NAH in acoustic tank for the experimental model needs some investigation of reflection wave from the wall of the acoustic tank and unmeasured zone of the experimental model due to the supporting structure for it. In this study, the effect of reflection wave in the acoustic tank and unmeasured area of the experimental model when using the NAH was investigated with experiment and numerical model. From these, it is known for the error due to reflection wave can be reduced when the distance between the measurement plane and source is being shorten. Also, unmeasured area of the experimental model gives rise to some error in the estimation of the far-field acoustic pressure.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.355-363
• /
• 2013

Panel methods are essential tools for analyzing a fluid-flow problem around complex three dimensional bodies, but they lack ability to solve viscous effects. On the other hand, CFD methods are considered as powerful tools for analyzing fluid-flow characteristics including viscosity. However, they also have short falls, requiring more computing time and showing different results depending on the selection of turbulence models and grid systems. In this paper a hybrid scheme combining a panel method and a CFD method is suggested. The scheme adopts a panel method for far-field solution where viscous effects are negligible and a CFD method for the solution of RANS equations in near-field where viscous effects are relatively strong. The intermediate region between the far-field and near-field is introduced where the calculated field point velocities by the panel method are given as boundary velocities for the CFD method. To verify the scheme, calculated results, by a panel method, a CFD method and the hybrid scheme, for a two dimensional foil section are compared. The suggested hybrid scheme gives reasonable results, while computation time and memory can be dramatically reduced. By using the hybrid scheme efforts can be concentrated for the local flow near the leading and trailing edges, by providing more dense grid system, where detailed flow characteristics are required.

• 수산해양기술연구
• /
• 제33권1호
• /
• pp.38-45
• /
• 1997

The steady drift forces on a barge in waves are investigated. The steady drift forces due to a near-field method which is based on direct integration of the pressure acting on the submerged surface of barge are compared with those due to far-field method which is based on the theory of momentum conservation. Numerical results of the linear motions are compared with the experimental and numercal ones which was submitted in the literature. A convergence of the steady drift forces according to the increase of the number of panels which represent the submerged surface are discussed.