• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.81-94
• /
• 2010

This paper deals with the fracture simulation of UHPFRC girder with the interface type model. Based on the existing numerical simulation of quasi-brittle fracture in normal strength concrete, constitutive modeling for UHPFRC I-girder has been improved by including a tensile hardening at the failure surface. The finite element formulation is based on a triangular unit, constructed from constant strain triangles, with nodes along its sides and neither at the vertex nor the center of the unit. Fracture is simulated through a hardening/softening fracture constitutive law in tension, a softening fracture constitutive law in shear as well as in compression at the boundary nodes, with the material within the triangular unit remaining linear elastic. LCP is used to formulate the path-dependent hardening-softening behavior in non-holonomic rate form and a mathematical programming algorithm is employed to solve the LCP. The piece-wise linear inelastic yielding-failure/failure surface is modeled with two compressive caps, two Mohr-Coulomb failure surfaces, a tensile yielding surface and a tensile failure surface. The comparison between test results and numerical results indicates this method effectively simulates the deformation and failure of specimen.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.127-135
• /
• 1983

A new approach is developed to analyze the reliability of the earth retaining wall using the concept of probability of failure, instead of conventional factor of safety. Many uncertainties, which are included in the conventional stability analysis, can be excluded by using the stochastic approach. And the reliability, more consistent with the reality, can be obtained by the simulation. The strength parameters of soil properties are assumed to be random variables to follow a generalized beta distribution. The interval [A, B] of the random variables could be determined using the maximum likelihood estimation. The pseudo-random values corresponding to the proposed beta distribution are generated using the rejection method. The probability of failure defined as follows, is obtained by using the Monte Carlo Method. $$P_f=\frac{M}{N}$$ where, $P_f$ : Probability of failure N : Total number of trials M : Total number of failure out of N A computer program is developed for the computation procedure mentioned above. Finally, a numerical example is solved using the developed program.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.1975-1988
• /
• 2024

It is important to maintain cladding integrity in spent nuclear fuel management. This study proposes a numerical analysis method to evaluate the fracture resistance of irradiated zirconium alloy cladding under pinch load known to cause Mode-III failure. The mechanical behavior and fracture of the cladding under pinch loading can be evaluated by a Ring Compression Test (RCT). To simulate the fracture of hydride precipitates, zirconium matrix, and Zr/hydride interfaces under the stress field generated by RCT, a micro-structure crack propagation simulation method based on Continuum Damage Mechanics (CDM) has been proposed. Our RCT simulation model was constructed from microscopic images of irradiated cladding. In this study, we developed an automated process to generate a pixel-based finite element model by separating the hydride precipitates, zirconium matrix, and interfaces using an image segmentation method. The appropriate element size was selected to ensure the efficiency and accuracy of a crack propagation simulation. The load-displacement curves and strain energies from RCT were compared and analyzed with the simulation results of different element sizes. The finalized RCT simulation model can be used to establish the failure criterion of fuel rods under pinch loading. The advantages and limitations of the proposed method are fully discussed here.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.116-122
• /
• 2014

This study proposes a system reliability analysis of rack storage facilities subjected to forklift colliding events. The proposed system reliability analysis consists of two steps: the first step is to identify dominant failure modes that most contribute to the failure of the whole rack facilities, and the second step is to evaluate the system failure probability. In the first step, dominant failure modes are identified by using a simulation-based selective searching technique where the contribution of a failure mode to the system failure is roughly estimated based on the distance from the origin in the space of the random variables. In the second step, the multi-scale system reliability method is used to compute the system reliability where the first-order reliability method (FORM) is initially used to evaluate the component failure probability (failure probability of one member), and then the probabilities of the identified failure modes and their statistical dependence are evaluated, which is called as the lower-scale reliability analysis. Since the system failure probability is comprised of the probabilities of the failure modes, a higher-scale reliability analysis is performed again based on the results of the lower-scale analyses, and the system failure probability is finally evaluated. The illustrative example demonstrates the results of the system reliability analysis of the rack storage facilities subjected to forklift impact loadings. The numerical efficiency and accuracy of the approach are compared with the Monte Carlo simulations. The results show that the proposed two-step approach is able to provide accurate reliability assessment as well as significant saving of computational time. The results of the identified failure modes additionally let us know the most-critical members and their failure sequence under the complicated configuration of the member connections.

• Computers and Concrete
• /
• v.27 no.2
• /
• pp.99-109
• /
• 2021

Experimental and discrete element methods were used to investigate the effects of echelon non-persistent joint on the failure behaviour of joint's bridge area under uniaxial compressive test. Concrete samples with dimension of 150 mm×100 mm×50 mm were prepared. Uniaxial compressive strength and tensile strength of concrete were 14 MPa and 1MPa, respectivly. Within the specimen, three echelon non-persistent notches were provided. These joints were distributed on the three diagonal plane. the angle of diagonal plane related to horizontal axis were 15°, 30° and 45°. The angle of joints related to diagonal plane were 30°, 45°, 60°. Totally, 9 different configuration systems were prepared for non-persistent joint. In these configurations, the length of joints were taken as 2 cm. Similar to those for joints configuration systems in the experimental tests, 9 models with different echelon non-persistent joint were prepared in numerical model. The axial load was applied to the model by rate of 0.05 mm/min. the results show that the failure process was mostly governed by both of the non-persistent joint angle and diagonal plane angle. The compressive strengths of the specimens were related to the fracture pattern and failure mechanism of the discontinuities. It was shown that the shear behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the joint angle. The strength of samples increase by increasing both of the joint angle and diagonal plane angle. The failure pattern and failure strength are similar in both methods i.e. the experimental testing and the numerical simulation methods.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.80-86
• /
• 2000

The Tailor Welded Blanks(TWB) are using various materials (different thickness, strength and different materials) can be welded together prior to the forming process. Therefore, TWB applications have become little by little important in automobile industries, because it has more light weight and process reduction. A burnish area is very important for TWB using laser welding. In this paper, evaluated failure criterion, effect of clearance and distance of between pad and punch by computer simulation. We used element separation method for fracture. And applied a plastic strain to failure criterion. According to the analysis results, we obtain failure criterion, when plastic strain is 2.0. The burnish area and clearance were inverse proportional.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.2
• /
• pp.63-71
• /
• 2005

In the field of nuclear reactor safety study, common cause failures (CCFs) became significant contributors to system failure probability and core damage frequency in most Probabilistic risk assessments. However, it is hard to estimate the reliability of such a system, because of the dependency of components caused by CCFs. In order to analyze the system, we propose an analytic method that can find the parameters with lack of raw data. This study adopts the shock model in which the failure probability increases as the shock is cumulated. We use two-step Expectation and Maximization (EM) algorithm to find the unknown parameters. In order to verify the analysis result, we perform the simulation under same environment. This approach might be helpful to build the defensive strategy for the CCFs.

• Journal of Korean Society for Quality Management
• /
• v.26 no.3
• /
• pp.71-81
• /
• 1998

In reliability analysis, the time difference between the expected next failure time and the current failure time or the Mean Time Between Failure(MTBF) is of significant interest. Until recently, in reliability growth studies, the reciprocal of the intensity function at current failure time has been used as being equal to MTBE($t_n$)at the n-th failure time $t_n$. That is MTBF($t_n$)=l/$\lambda (t_n)$. However, such a relationship is only true for Homogeneous Poisson Process(HPP). Tsokos(1995) obtained the upper bound and lower bound for the MTBF($t_n$) and proposed an estimator for the MTBF($t_n$) as the mean of the two bounds. In this paper, we provide the estimator for the MTBF($t_n$) which does not depend on the value of the shape parameter. The result of the Monte Carlo simulation shows that the proposed estimator has better efficiency than Tsokos's estimator.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.483-489
• /
• 2009

Electrolytic capacitors are used in variety of equipments as smoothening element of the power converters because it has high capacitance for its size and low price. Electrolytic capacitors, which is most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. Therefore it is important to estimate the parameter of an electrolytic capacitor to predict the failure. This objective of this paper is to propose a new method to detect the rise of equivalent series resistor(ESR) in order to realize the online failure prediction of electrolytic capacitor for DC output filter of power converter. The ESR of electrolytic capacitor estimated from RMS result of filtered waveform(BPF) of the ripple capacitor voltage/current. Therefore, the preposed online failure prediction method has the merits of easy ESR computation and circuit simplicity. Simulation and experimental results are shown to verify the performance of the proposed on-line method.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.89-91
• /
• 2012

The numerical simulation for detonation failure of ammonium nitrate (AN) based non-ideal explosives is carried out with an accurate and state-of-the-art Eulerian method. Detonation failure is readily observed in the rate stick experiments utilizing the AN mixture explosives and the inert confinements of varying thicknesses. The composition of non-ideal explosives and thickness of the confinements influence the characteristics of detonation failure. Calculated results are compared against the experimental data of both unconfined and confined rate stick problems and provide a reliable guideline to establish a fine-tuned chemical kinetic model for detonation failure.