• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.132-142
• /
• 2006

In this paper, we present a candidate high data rate space time coded OFDM system for short range personal networking. The system transmits the complex space time coded signals with a hybrid orthogonal frequency division multiplexing (OFDM) based on ultra wideband (UWB) pulses. The transmitted signals are sparse pulse trains modulated by a frequency selected from a properly designed set of frequencies. Additionally, a widely linear (WL) receive filter and a space time frequency transmission are designed by using two simple parallel linear detectors. To overcome the deeply fade in the propagation system, a beamforming combined with space time block codes also 따 e briefly discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.3
• /
• pp.28-34
• /
• 1999

In this paper. we propose the method of Scene Change Detection for video sequence using the DC components and the moving vectors in the Macro Blocks in the DCT blocks. The proposed method detects the Scene Change which would not be related with the specific sequences in the compressed MPEG domain. To do this. we define new metrics for Scene Change Detection using the features of picture component and detect the exact Scene Change point of B-pictures using the characteristics of B-picture's sharp response for the moving vectors. In brief, we will detect the cut point using I-picture and the gradual scene changes such as dissolve, fade, wipe, etc. As a results, our proposed method shows good test results for the various MPEG sequences.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.66-79
• /
• 2005

In this paper, we have performed the analysis of RF transceiver system and communication link for the improvement in reliability of Smart-UAV(Unmanned Aerial Vehicles) Data-Link. The system analysis performed using the development specification of the data link and data sheet of using components through the system simulation tool that is Agilent EEsof ADS. Also, the communication link analysis peformed using a variety of propagation models for the smart UAV operation environments. As a result, we have presented problems appeared in the simulation results and development specification. As well as, we have presented about several problems and consideration issue for system design through the communication link analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.519-529
• /
• 1993

A spectral and power efficient modulation technique, named Compact Superposed Quadrature Amplitude Modulation (Compact-SQAM), is introduced. The performance of Compact-SQAM system, in a Linearly and nonlinearly amplified single and multicarrier environment, in the presence of additive white Gaussian noise(AWGN), intersymbol interference(ISI), timing jitter and adjacent channel interference (ACI), is experimentally analyzed via computer simulation. Various channel conditions, such as channel spacing, between the main and adjacent channels and fade depth on the desired main channel, are examined. Our result shows that Compact-SQAM, and better P(e) performance that other modems using simple Butteroworth type postdetection receive filters. Especially, Compact-SQAM modem achieves higher efficiency of frequency utilization and better P(e) performance than other modems in the severly bandlimited nonlinear multicarrier channels.

• The KIPS Transactions:PartB
• /
• v.12B no.4 s.100
• /
• pp.403-412
• /
• 2005

In this paper, we propose an effective method for detecting and classifying shot transitions in video sequences. The proposed method detects and classifies shot transitions including cuts, fades and dissolves by compensating camera operations in video sequences, so that our method prevents false positives resulting from camera operations. Also, our method eliminates local moving objects in the process of compensating camera operations, so that our method prevents errors resulting from moving objects. In the experiments, we show that our shot transition approach can work as a promising solution by comparing the proposed method with previously known methods in terms of performance.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.55-63
• /
• 2001

Friction and wear properties of brake friction materials containing different metal fibers (Al, Cu or Steel fibers) were investigated using a pad-on-disk type friction tester. Two different materials(gray iron and Al-MMC)) were used for disks rubbing against the friction materials. Results from ambient temperature tests revealed that the friction material containing Cu fibers sliding against cast iron disk showed a distinct negative ${\mu}$-ν (friction coefficient vs. sliding velocity) relation implying possible stick-slip generation at low speed. The negative ${\mu}$-ν relation was not observed when the Cu-containing friction materials were rubbed against the. Al-MMC counter surface. As applied loads increased, friction materials showed higher friction coefficients comparatively. Friction materials slid against cast iron disks exhibited higher friction coefficients than Al-MMC disks during high temperature tests. On the other hand, high temperature test results suggested that copper fibers in the friction material improved fade resistance and the steel fibers were not compatible with Al-MMC disks showing severe material transfer and erratic friction behavior during sliding at elevated temperatures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.853-856
• /
• 2004

This study presents a prediction method for sound insulation of sandwich plate which consists of orthotropic plates as skin and mineral wool as core. Prediction by classic theory, which considers orthotropic effects, requires considerably complex and cumbersome process and moreover many assumption. However, experimental results of the sandwich plate with orthotropic plates as skin show that the orthotropic effects are disappeared or fade out. Hence, predictions by using sandwich model are conducted by a simple modelling that substitutes an orthotropic plate into an equivalent flat plate. Comparative results show that sandwich model gives a good agreements with theoretical prediction.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.2
• /
• pp.15-24
• /
• 2019

This study analyzes the effect of the capital structure of Korean manufacturing firms on default risk based on Moody's KMV option pricing model where the probability of default is obtained by measuring the distance to default as a covariant in logit model developed by Merton (1974). Based on the panel data of manufacturing firms, this study achieves its primary objective, using a fixed effect regression model and examines the effect of a firm's capital structure on default risk amongst publicly listed firms on Korea exchange during 2005-2016. Empirical results obtained suggest that the rise in short-term debt to assets leads to increase the risk of default whereas the increase in long-term debt to assets leads to decrease the default risk. The benefits of short-term debt financing over a short-term period fade out in the presence of information asymmetry. However, long-term debt financing overcomes the information asymmetry and enjoys the paybacks of tax advantage associated with long-term debt. Additionally, size, tangibility and interest coverage ratio are also the important determinants of default risk. Findings support the trade-off theory of capital structure and recommend the optimal use of long-term debt in a firm's capital structure.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.2
• /
• pp.212-224
• /
• 2018

The characteristics of the relationship between the evolution of propeller trailing vortex wake and skew angle are numerically examined based on four different five-blade David Taylor Model Basin (DTMB) model propellers with different skew angles. Numerical simulations are based on Reynolds-averaged Naviere-Stokes (RANS) equations combined with SST $k-{\omega}$ turbulence model. Results show that the contraction of propeller trailing vortex wake can be restrained by increasing skew angle and loading conditions, and root vortices fade away when the propeller skew angle increases. With the increase of the propeller's skew angle, the deformation of the hub vortex and destabilization of the tip vortices are weakening gradually because the blade-to-blade interaction becomes weaker. The transition trailing vortex wake from stability to instability is restrained when the skew increases. Furthermore, analyses of tip vortice trajectories show that the increasing skew can reduce the difference in trailing vortex wake contraction under different loading conditions.

• Journal of Fashion Business
• /
• v.23 no.3
• /
• pp.23-34
• /
• 2019

The aim of this study is to explore the possibility utilizing Rhododedron brachycarpum as a new natural dye resource. It was dyed in silk fabric according to different dyeing conditions such as dye concentration, dye bath temperature, dyeing time and dye bath pH. The effect of the mordanting conditions were estimated as dyeability and color changes. Additionally, the colorfastness, antibacterial property, ultraviolet protection properties of the dyed and mordanted silk fabrics were examined. The water-soluble dye of Rhododedron brachycarpum extracted with distilled water was expressed as Yellow Red color. The dye-abilities of silk generally increased depending on the increasing values of dye concentration, dye bath temperature and dyeing duration. The highest K/S values were obtained at a dye concentration of 100% (v/v), a dye bath temperature of $90^{\circ}C$, a dyeing duration 120 minutes and a dyeing of pH 2. The light fastness of dyed and Cu mordanted silk fabrics were found to be 4 grade while Al, Fe mordanted silk fabrics were found to be 2~3 grade. The dry cleaning and rubbing fastness were excellent or good. The fade of washing fastness was not good, however, the stain of washing fastness was excellent. The dyed and Al, Cu mordanted silk fabrics indicated 99.9% reduction rate. The dyed and the mordanted fabrics showed very good ultraviolet protection factors.