• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.4
• /
• pp.347-370
• /
• 2011

Slurry type shield would be very effective for the tunnelling in a sandy ground, when the slurry pressure would be properly adjusted. Low slurry pressure could cause a tunnel face failure or a ground settlement in front of the tunnel face. Thus, the stability of tunnel face could be maintained by applying an excess slurry pressure that is larger than the active earth pressure. However, the slurry pressure should increase properly because an excessively high slurry pressure could cause the slurry flow out or the passive failure of the frontal ground. It is possible to apply the high slurry pressure without passive failure if a horizontal impermeable layer is located in the ground in front of the tunnel face, but its location, size, and effects are not clearly known yet. In this research, two-dimensional model tests were carried out in order to find out the effect of a horizontal impermeable layer for the slurry shield tunnelling in a saturated sandy ground. In tests slurry pressure was increased until the slurry flowed out of the ground surface or the ground fails. Location and dimension of the impermeable layer were varied. As results, the maximum and the excess slurry pressure in sandy ground were linearly proportional to the cover depth. Larger slurry pressure could be applied to increase the stability of the tunnel face when the impermeable layer was located in the ground above the crown in front of the tunnel face. The most effective length of the impermeable grouting layer was 1.0 ~ 1.5D, and the location was 1.0D above the crown level. The safety factor could be suggested as the ratio of the maximum slurry pressure to the active earth pressure at the tunnel face. It could also be suggested that the slurry pressure in the magnitude of 3.5 ~4.0 times larger than the active earth pressure at the initial tunnel face could be applied if the impermeable layer was constructed at the optimal location.

• Journal of Yeungnam Medical Science
• /
• v.22 no.2
• /
• pp.150-165
• /
• 2005

Purpose: This study was conducted to investigate the prognostic factors of postpsychotic depressive symptoms in patients with schizophrenia. Materials and Methods: Eighty patients were selected based on the diagnostic criteria from the DSM-IV, PANSS and ESRS. For all patients information was collected on demographic and clinical characteristics. The subjective depressive symptoms and the objective depressive symptoms, as well as patients insight regarding psychosis were evaluated. The subjective depressive symptoms were evaluated by BDI and ZDS; the objective depressive symptoms were evaluated by HDRS and CDSS, and patient insight into the psychosis was evaluated by KISP. Results: The comparisons using demographic and clinical characteristics showed that HDRS and CDSS had significant difference with regard to gender and suicide attempts; the BDI was associated with difference in education level and age of onset. The patients with scores above cuff-off score for each scale were 20(25.0%) for the BDI, 16(20.0%) for the ZDS, 18(22.5%) for the CDSS and 6(7.5%) for the HDRS. The results of the stepwise multiple regression analysis showed that the scores for the KISP, education levels, gender and suicide attempts were the main prognostic factors in patients with the psychotic depressive disorder of schizophrenia. Conclusion: The main prognostic factors in psychotic depressive disorder of schizophrenia included: insight into psychosis, suicidal attempts. Insight into the psychosis was the most reliable prognostic factor but this characteristic had a negative relationship to the with depressive symptoms.

• Korean Security Journal
• /
• no.57
• /
• pp.57-84
• /
• 2018

This study assumes that the perception of the ex-prisoner's against stigma will affect trust in interpersonal relationship. Prior studies have suggested that there is a stigma at the base of the awareness where people avoid and discriminate against ex-prisoner's. This in turn affects ex-prisoner's' recividicism, but there is no study about ex-prisoner's perception of stigma in Korea. Although stigma can be explained in numerous ways, this study is based on the opinion of Phillips(2016), which divides the subscale of stigma as perceived public stigma, perceived personnel stigma, and self stigma. He insisted that ex-prisoner's believe perceived public stigma higher than self-stigma. these results are consistent with this study. However, it is important to note that although ex-prisoner's are more aware of public stigma than self-stigma, they are actually more influenced by self stigma in pereonal relationships. This means that ex-prisoner's are more susceptible to internal psychological awareness than external social recognition. Therefore, the development and intervention of the program to overcome the internal self-stigma of the released prisoner is required. In this study, first, stigma, especially self-stigma turned out to have influence on the interpersonal trust. Therefore, as self-stigma level increased, the interpersonal trust decreased in most cases. Second, it was shown that stigma has the greatest influence on children out of family members, co-workers out of social relationship, self trust out of general relationship in. This confirms that stigma is a factor that greatly influences relationship between important people for ex-prisoner's. Third, since self-sigma negatively reestablish self-identity, make individuals recognize themselves as deviators and show bad lifestyle, which lead them to become habitual offender, ex-prisoner's need to make efforts to overcome self-stigma, and development and intervention of program that can make ex-prisoner's have positive self identity is requested. Fourth, although participants in the study were only male, it seems that there is difference in recognition of stigma by gender, and influence of stigma not only on interpersonal relationships, but also on social reintegration and recidivism imply that these might be good future research topics.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.15-30
• /
• 1998

The variation of the catches of Skipjack(Euthynnus pelamis) and the relationships between the SST and the fishing ground is examined using the catches data of skipjack obtained by Iwawada Fisheries Cooperative of Chiba Prefecture in Japan from 1982 to 1988. The annual mean catch for Skipjack was 151,375.1kg. the annual fluctuation of catch was that the catch in 1984 was increasing, but it was decreased less than 50% in 1985, and was repeated after being a little recovered in 1986, and it was recovered with the level of 1984 in 1988. The fluctuation of catch for Skipjack in every fishing term is that daily mean catch of the primary fishing term (January, February and March) is 894.6kg, but the middle fishing term(April and May) more than four times of the primary fishing term is 3,666.0kg, the last fishing term(June and July) was decreasing at 767.9kg and the fishing ground gradually becomes extinct. The annual mean SST in fishing ground was an extent of from $19.0^{\circ}C$ to $20.2^{\circ}C$, the mean SST of every year except 1983 was from $19.0^{\circ}C$ to $19.9^{\circ}C$. It is said that the optimum SST of Skipjack in Sotobo sea area is the degree of $19.0^{\circ}C$. Therfore, the thing which will guess the time and the location appeared the optimum SST is the very important factor to operate efficiently. About the extent of SST in fishing ground, it was from $17.0^{\circ}C$ to $19.0^{\circ}C$ on March, from $17.5^{\circ}C$ to $20.5^{\circ}C$ on April and from $17.5^{\circ}C$ to $23.5^{\circ}C$ on May, which the extent of SST was gradually larger and larger, on June from $21.0^{\circ}C$ to $23.5^{\circ}C$, fishing ground was formed only the degree of SST more than $21.0^{\circ}C$.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.115-133
• /
• 2021

This study examines the concept and related technologies of the 4th industrial revolution that has been mixed so far and examines the socio-economic changes and influences resulting from it, and the cases of responding to the 4th industrial revolution in major countries. Based on this, by deriving SWOT factors and calculating the importance of each factor for Korean venture companies to prepare for the forth industrial revolution, it was intended to help the government and policymakers in suggesting directions for establishing related policies. Furthermore, the purpose of this study was to suggest a direction for securing global competitiveness to Korean venture entrepreneurs and to help with basic and systematic analysis for further academic in-depth research. For this study, a total of 21 items derived through extensive literature research and data research to understand what are the necessary competency factors for internal and external environmental changes in order for Korean venture companies to have global competitiveness in the era of the 4th Industrial Revolution. After reviewing SWOT factors by three expert groups and confirming them through Delphi survey, the importance of each item was analyzed by using AHP, a systematic decision-making technique. As a result of the analysis, it was shown that Strength(48%), Opportunity(25%), Threat(16%), Weakness(11%) were considered important in order. In terms of sub-items, 'quick and flexible commercialization capability', 'platform/big data/non-face-to-face service activation', and 'ICT infrastructure and it's utilization' were shown to be of the comparatively high importance. On the other hand, in the lower three items, 'macro-economic stability and social infrastructure', 'difficulty in entering overseas markets due to global protectionism', and 'absolutely inferior in foreign investment' were found to have low priority. As a result of the correlation verification by item to see differences in opinions by industry, academia, and policy expert groups, there was no significant difference of opinion, as industry and academic experts showed a high correlation and industry experts and policy experts showed a moderate correlation. The correlation between the academic and policy experts was not statistically significant (p<0.01), so it was analyzed that there was a difference of opinion on importance. This was due to the fact that policy experts highly valued 'quick and flexible commercialization', which are strengths, and 'excellent educational system and high-quality manpower' and 'creation of new markets' which are opportunity items, while academic experts placed great importance on 'support part of government policy', which are strengths. The implication of this study is that in order for Korean venture companies to secure competitiveness in the field of the 4th industrial revolution, it is necessary to have a policy that preferentially supports the relevant items of strengths and opportunity factors. The difference in the details of strength factors and opportunity factors, which shows a high level of variability, suggests that it is necessary to actively review it and reflect it in the policy.

• Journal of Family Resource Management and Policy Review
• /
• v.25 no.1
• /
• pp.15-34
• /
• 2021

Purpose : This study aims to identify the influence of individual, parental, workplace, and policy variables on the intention of marriage of unmarried workers. The results of the study can be used as a basis to come up with policy and practical measures to increase these workers' intention of marriage. Methods : Data was collected from 480 participants through a questionnaire. The measuring tools in this study were tested for reliability and validity. In addition, technical statistics, ANOVA, correlation analysis, and hierarchical regression analysis were performed by SPSS 18.0. Results : First, unmarried workers' willingness to marry was higher above the average. Second, significant differences in the unmarried workers' intention of marriage were revealed based on gender, age, level of education, total assets, and debt status. Significant associations were also found with parents' economic levels and the possibility of parental support for housing and marriage expenses. The differences in response based on employment patterns, job satisfaction, and family-friendly organizational culture were also significant. The correlation between policy variables and marriage intentions also showed the necessity of a funded housing policy and a marriage preparation policy. Third, based on the hierarchical regression analysis using personal, parental, and workplace variables to identify the factors affecting unmarried workers' willingness to marry, it is clear that gender, age, and the likelihood of parental support for housing and marriage expenses have a significant impact. A family-friendly organizational culture and funded housing policy were also significant contributors. Conclusion : The study found that the funded housing policy was the most important factor affecting unmarried office workers' willingness to marry. Additionally, the possibility of parental support for housing and marriage expenses and a family-friendly organizational culture at work were found to have an important impact on the improvement of unmarried workers' willingness to marry.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1383-1392
• /
• 2021

It has been reported that emodin, a major pharmacologically active ingredient of herbal medicines such as Polygonum cuspidatum, Polygonum multiflorum, Rheum palmatum, and Aloe vera, is effective in antioxidant, antibacterial, anti-inflammatory, anticancer, and liver protection. In this study, to investigate the potential of emodin to be used as a skin disease and functional material, the activity related to the improvement of inflammation and skin barrier function was confirmed. To observe the anti-inflammatory effect on HaCaT cells, which are human keratinocytes, cytokine inhibition was confirmed by ELISA kit and protein expression by western blot. In HaCaT cells activated with TNF-α (10 ng/mL)/IFN-γ (10 ng/mL), emodin was treated with each concentration (5, 10, 20, 40) µM. As a result, It was confirmed that the production amount of TNF-α, IL-1β and IL-6 decreased as the concentration of emodin increased. In the experimental results on the expression levels of inflammation-related proteins iNOS and COX-2, it was confirmed that 48% of iNOS and 29% of COX-2 were inhibited compared to control at a concentration of 20 µM of emodin. As an indicator of skin barrier function improvement, the mRNA expression level of filaggrin, involucrin, and loricirn and the production amount of filaggrin, involucrin, and loricirn were confirmed. and excellent results were obtained with an emodin concentration-dependent increase. In particular, filaggrin, which was produced twice as much as the control at a concentration of 20 µM, is a protein involved in the formation of NMF, a natural moisturizing factor, and is known to play an important role in moisturizing the stratum corneum. In conclusion, it was confirmed that emodin can be used as a material for improving inflammation and improving skin barrier function, which is part of the potential for use as a skin disease and functional material. It is believed that if additional research is performed in the future, the scope of its application can be further expanded.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.404-412
• /
• 2011

The purpose of this study is to prepare extruded rice flours suitable for baking rice cookies. The extruded rice flours were prepared at 100 and 130$^{\circ}C$ temperature and 25 and 27% moisture content in a co-rotating twin screw extruder. The rice extrudates were dried at 100$^{\circ}C$ for 18 hr and subsequently ground into the fine flour. Characteristics of the extruded rice flours were examined by rapid visco analysis, hydration property analysis, differential scanning calorimetry (DSC), and in vitro digestion test. Water absorption, solubility, and swelling power of all extruded rice flours were higher than those of native rice flour. DSC analysis showed that native rice flour had a peak at about 65$^{\circ}C$ while all extruded rice flours did not show any peaks since they were already gelatinized during the extrusion proess. Viscosity of the extruded rice flours decreased with increasing temperature and lowering moisture content in the extrusion proess. The extruded rice flours prepared at 130$^{\circ}C$ exhibited lower viscosity than those prepared at 100$^{\circ}C$. The operating temperature of the extrusion proess was critical for the starch digestion in vitro. The extruded rice flours prepared at 130$^{\circ}C$ showed a rapid decrease in digestible starch content while an increased level of slowly digestible starch content was observed compared to those treated at 100$^{\circ}C$ in the extruder. Cookies were prepared with a mixture of wheat flour and extruded rice flours at the ratio of 7 to 3. The cookies made with the extruded rice flours had lower spread factor and darker yellow color than those prepared with wheat flour only. Hardness of the extruded rice flour-added cookies was similar to that of the wheat flour cookie whereas their overall acceptance was better. Therefore the rice cookies partially supplemented with extruded rice flours may have a potential as early childhood foods which require soft texture and allergy reduction.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.438-446
• /
• 2018

The purpose of this study was to investigate food safety awareness, knowledge, and behavior in college students, to provide basic data for the increase in food safety awareness. Data were collected from 252 college students in Gyeonggi region, using a self-administered questionnaire. In results of concern about food safety, subjects responded 3.48 of 5.00 and have knowledge about food safety education revealing significantly higher awareness and concern than subjects without knowledge about food safety education. Food safety awareness of distributed food was 2.55, considered unsafe. Among reasons in perceiving food as unsafe, 62.3% of subjects expressed distrust about safety relative food production. As for risk factors relative to food safety, subjects responded that the highest risk factor was food additives (2.35), followed by heavy metal (2.38) and endocrine disrupters (2.38). Correlation analysis resulting in risk factors for food had positive correlation with each other, heavy metal revealed highest correlation with pesticide residue (r = 0.674), than with endocrine disrupters (r = 0.672). Also, genetically modified food revealed high correlation with radiation irradiated food. Regression analysis demonstrated that concern about food safety significantly influenced pro-actively engaging in food safety education. Meanwhile, 63.5% of subjects correctly responded to food safety knowledge items. The item 'the heavy metals are contaminated the most, in the roots of vegetables' revealed the lowest correct answer rate (38.1%). In food safety behavior, the item 'always wash hands before handling food and meal's revealed 3.85, and subjects with awareness and concern about food safety education, responded in significantly higher numbers than subject without awareness and concern about food safety. The most neglected concern was relative to frozen food thawed at room temperature. Together, students recognize that distributed foods are unsafe, and students with awareness and concern about food safety education showed higher knowledge compared to without awareness and concern experience about food safety eduction. So, systematic education using accurate and objective data is required to reduce anxiety and raise the level of awareness and concern about food safety.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.415-423
• /
• 2018

Rice panicle architecture is an important factor affecting yield potential. Korean rice cultivars have a narrow genetic background for panicle architecture. To enhance the yield potential of Korean rice cultivars, we developed and characterized rice lines with new panicle architecture. Rice with improved panicle architecture has clustered spikelets and dense panicles (CD type). CD rice was derived from a cross between "Binhae Col.#1" carrying dense panicles, and "ARC10319" that has the clustered spikelets gene (Cl). CD rice lines had short and semi-erect panicles with two to five high density spikelets clustered at the tips of primary and secondary rachis branches. CD rice lines had dramatically increased numbers of spikelets; almost twice as many as those of Korean rice cultivars. The increase in spikelet number was mainly caused by the increased spikelets and branches on secondary rachises compared to those on primary rachises. The increase in spikelet number was expected to enhance the yield of CD rice by expanding sink capacity. However, the yield of selected lines; CD9, CD27, CD34, and CD39, did not reach the level of the Korean high-yielding cultivars "Boramchan" and "Hanareum2," due to the reduction in panicle number and grain weight, and poor ripening. Although no substantial yield increase was observed in CD rice, the panicle architecture of CD rice, clustered spikelets, and dense panicles could be new genetic resources as breeding material for diversifying panicle architecture and enhancing yield potential.