• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 춘계학술대회
• /
• pp.113-123
• /
• 2007

Through so that accident of semiconductor industry deduces unsafe factor of the person center on unsafe behaviour that incident history and questionnaire and I made starting point that extract very important factor. It served as a momentum that make up base that analyzes factors that happen based on factor that extract factor cause classification for the first factor, the second factor and the third factor and presents model of human error. Factor for whole defines factor component for human factor and to cause analysis 1 stage in human factor and step that wish to do access of problem and it do analysis cause of data of 1 step. Also, see significant difference that analyzes interrelation between leading persons about human mistake in semiconductor industry and connect interrelation of mistake by this. Continuously, dictionary road map to human error theoretical background to basis traditional accidental cause model and modern accident cause model and leading persons. I wish to present model and new model in semiconductor industry by backbone that leading persons of existing scholars who present model of existent human error deduce relation. Finally, I wish to deduce backbone of model of pre-suppression about accident leading person of the person center.

• 한국인터넷방송통신학회논문지
• /
• 제11권2호
• /
• pp.107-112
• /
• 2011

$n=pq$인 합성수 을 크기가 비슷한 p와 q로 소인수분해하는 것은 매우 어려운 문제이다. 대부분의 소인수분해 알고리즘은 $a^2{\equiv}b^2$ (mod $n$)인 제곱 합동이 되는 ($a,b$)를 소수의 곱 (인자 기준, factor base, B)으로 찾아 $a^2-b^2=(a-b)(a+b)$ 공식에 의거 유클리드의 최대공약수 공식을 적용하여 $p=GCD(a-b,n)$, $q=GCD(a+b,n)$으로 구한다. 여기서 ($a,b$)를 얼마나 빨리 찾는가에 알고리즘들의 차이가 있으며, B를 결정하는 어려움이 있다. 본 논문은 좀 더 효율적인 알고리즘을 제안한다. 제안된 알고리즘에서는 $n+1$을 3자리 소수까지 소인수분해하여 B를 추출하고 B의 조합 $f$를 결정한다. 다음으로, $a=fxy$가 되는 값을 $\sqrt{n}$ < $a$ < $\sqrt{2n}$ 범위에서 구하여 $n-2$의 소인수분해로 $x$를 얻고, $y=\frac{a}{fx}$, $y_1$={1,3,7,9}을 구한다. 제안된 알고리즘을 몇 가지 사례에 적용한 결과 $\sqrt{n}$ < $a$를 순차적으로 찾는 기존의 페르마 알고리즘에 비해 수행 속도를 현격히 단축시키는 효과를 얻었다.

• 유기물자원화
• /
• 제20권3호
• /
• pp.52-59
• /
• 2012

처리공정별 연계처리수질을 검토한 결과 생물학적처리만 거친 생물반응조 처리수의 경우 연계부하율이 $COD_{Mn}$의 경우 1.67%(설계수질 기준), 2.59%(운영수질 기준), T-P의 경우 3.69%(설계수질 기준), 7.67%(운영수질 기준)로 다소 높게 나타났으나 하수처리장 운영에 미치는 영향은 거의 없을 것으로 판단된다. 또한, 고도처리공정인 산화부상분리 처리수 및 생물여과 처리수의 경우 연계부하율은 1% 내외로 고도처리설비 설치 시 과대 설비설치의 우려가 있다. 따라서 S하수처리장의 경제성 및 안정적인 운영을 고려할 경우 생물학적처리인 생물반응조를 거친 처리수를 연계하는 것이 바람직할 것으로 판단된다.

• 감성과학
• /
• 제13권1호
• /
• pp.279-284
• /
• 2010

본 연구는 직물구조 디자인의 데이터 베이스에 대한 기초 연구를 수행한다. 이를 위해서 소모직물과 면직물들의 직물밀도계수가 월츠 교수와 피카놀 회사에서 제안된 커버팩터와 관련시켜 분석되고 토의된다. 또한 소모직물과 면직물의 직물밀도계수와 커버팩터와의 관계가 직물조직과 실의 번수에 따라 분석 토의된다. 끝으로 이들 천연직물들의 염색 가공공정에서의 공정수축률이 직물밀도계수와 함께 직물구조 디자인의 데이터베이스 시스템의 예비 연구로서 분석 토의된다. 그 결과는 소모직물과 면직물의 밀도계수, K 값은 600에서 1000까지 분포하였으며 이들 직물들의 직물밀도계수는 0.4에서 0.8 그리고 0.2에서 1.0의 범위에서 각각 분포하였다. 모직물의 가공축은 2%에서 10% 그리고 면직물의 가공축은 2%에서 20%까지 분포하였다. 그리고 모직물과 면직물의 직물밀도계수는 직물구조디자인에 대한 데이터 베이스의 개념으로서 직기와 직물구조 그리고 직축과 가공축에 따라서 분포됨을 보여주었다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제22권1호
• /
• pp.17-28
• /
• 2016

Purpose: The purpose of this paper is to analyze the spatial configurations of a sample of Korean regional emergency medical centers (REMCs) to explore its underlying genotypes and thus produce a base line data for the analysis and evaluations of future REMCs designs using space syntax theory. Methods: Space syntax analysis was used as a major tool for the analysis and exploration of Genotype. The measures of Integration(overall integration with exterior and without exterior as well as the integration of individual clinical spaces for each center), base difference factor (DF) and Space link ratio were calculated for a sample of seven Korean REMCs. Results: The result shows a strikingly similar pattern of Syntactic measures across the sample, the mean integration of sample ranges from 0.82-0.99 with exterior (while considering the exterior space as a root) and 0.81-1.01 without exterior (considering the connections of interior spaces only with no outside connection). The base difference factor (DF) of the sample varies from 0.60-0.81 with exterior and from 0.59-0.82 without exterior. Case number-1 was identified as non-genotype with differing order of Syntactic values. Although the genotype had different forms, layouts and even sizes, these results cannot be explained by Phenotypical comparisons. Implications: This study will contribute to the configurational analysis and evaluation of existing and future Korean REMCs design and practice of emergency healthcare delivery system in Korea.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.138-144
• /
• 2013

The automation technology for overlay welding is needed due to the occurrence of severe corrosion and abrasion on the surface of internal contact in different shape of fittings. In Korea, different shapes of fittings have been manufactured by using the imported equipment of overlay welding automation at some companies. Thus the research on the development of overlay welding automation system (in short, OWAS) for a large L-type tube is urgently needed. In this paper, the investigation is focused on the optimal design of a supporting base for the (currently developing) OWAS of large L-type tube. Specifically we assume that the base which supports the equipment during the process of overlay welding is loaded as self-weight in the direction of gravity through static analysis especially when it is rotated 180 degree on the OWAS. For optimal design of a supporting base for OWAS of large L-type tube, Solidworks(R) (for 3-dimensional modelling) and ANASYS Workbench(R) (for structural analysis) are incorporated so as to proceed an optimization routines based on Response Surface Method (RSM) and Design of Experiment (DOE). In more specific, DOE finds out major factors (or dimensions) of the supporting base by using MINITAB(R). Then the regression equations between design variables (the major factors of supporting base) and response variables (deformation, stress and safety factor for the supporting base), which will be resulted in by RSM, verify the major factors of DOE. In the next step, Central Composite Design (CCD) plans 20 simulations of ANASYS Workbench(R) and then figures out the optimal values of design variables which will be reflected on the manufacturing of supporting base. Finally welding experiment is conducted to figure out the influence of overlay welding quality in applying the optimized design values of supporting base to the actual OWAS.

• KDI Journal of Economic Policy
• /
• 제33권4호
• /
• pp.143-177
• /
• 2011

수익형 민간투자사업의 경우 가격요소와 비가격요소를 동시에 고려하는 다차원 경매제도가 시행되고 있다. 본 논문은 수익형 민간투자사업 중 도로사업의 입찰 평가자료를 분석하여 정책적 시사점 및 개선방안을 제시함을 목적으로 한다. 입찰 평가자료 분석 결과, 평가 1위 사업자들의 득점이 증가하고 있는데, 이는 기본점수의 증가와 경쟁의 심화로 인한 것으로 판단된다. 평가 1위 사업자 선정에는 비가격부문에서 발생하는 점수편차가 결정적인 것으로 제시되었다. 또한 최초제안자 우대점수가 높게 설정된 사업의 경우 경쟁이 발생하지 않음도 확인하였다. 가격부문 중 재정지원부문의 점수별 금액은 평균 7.3억원으로 통행료부문의 점수별 금액 24.3억원과 큰 차이를 보였다. 비가격부문의 점수별 금액은 23.0억원 정도로 추정되어 가격부문과는 다소 차이를 나타내었다. 분석결과를 토대로, 최초제안자 우대점수의 적정 수준 유지, 재정지원부문의 평가방식 개선, 기본점수의 재조정 등이 제언되었다.

• 한국조리학회지
• /
• 제13권4호
• /
• pp.164-177
• /
• 2007

The purpose of this study is to explore the relationship between the service of employees in the foodservice industry and their customers' satisfaction. The study surveyed 310 subjects who are the employees of companies in Busan, Ulsan, City and Gyeongsangnam-do and processed the result using SPSS for Win V. 12. 0. For statistical analysis, Frequency, Factor Analysis and Regression were put into operation. As a result of Factor Analysis on the quality of company food-service, six factors have been extracted. The result of the Factor Analysis of satisfaction revealed one factor. In conclusion, this study shows that the quality of foodservice - food, convenience, menu, kindness, hygiene/cleanliness, facilities - had a positive effect on users' satisfaction. It is expected that the results will provide a base for marketing strategies to be used by the managers and marketers in foodservice companies.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.7-11
• /
• 2003

CDMA(code division multiple access) has very large peak to average power ratio(PAR) and behave as noise-like wide band digital signals with 1.2288 Mbps transmission rate. For signals with high PAR like CDMA, it is reasonable to prescribe occupied bandwidth(OBW) as average occupied bandwidth. Bandwidth measurements of CDMA signals at remote site are affected by co-channel and adjacent channel interference from adjacent CDMA base station, distortion of signal by fading effect, spurious emission and environment noises. In this study, we have compared OBW measurements in an on-air environment with those measured in a base station using adjacent channel leakage ratio(ACLR) as a reference measurement factor. As results of analysis, the OBW at ACLR$\geq$35 ㏈ shows nearly same statistical characteristics regardless of the measurement locations and environments.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.1283-1285
• /
• 2007

A wireless sensor network is the combination of a large number of deployed sensors over an area. Communication between the sensors is the most important factor for a successful sensor network. It is mandatory that long distance and multi-hop communication will occur between sensors. Generally sensors relay the sensed data of a particular territory to the command center via a base station. For the non uniformed deployment of sensors many sensors may deploy in hostile areas surrounded by full of obstacles or in other condition it may be out of the direct communication range of the base station. It seems a critical problem for routing data to and from those sensors to the base station. This paper proposes a route management scheme using a dynamic load balancing approach based on residual energy of each agent sensors.