• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.428-430
• /
• 2008

Dye-sensitized solar cell has many internal resistant components such as Pt counter electrode, $TiO_2$/dye/electrolyte, charge diffusion, sheet resistance of TCO. Among these, the resistance about the counter electrode can be reduced by increasing the roughness factor of Pt counter electrode. This causes the increase of fill factor and improvement of efficiency. And the amount of light reflection on the counter electrode also increases as the roughness factor goes up. In our experiment, we suggest a new deposition structure of Pt thin film that is a stepped-type structure. The more step lines are in the counter electrode, the more roughness factor is. As a result, we get the improvement of fill factor and efficiency by controlling the roughness factor of counter electrode.

• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1119-1127
• /
• 2006

The purpose of this study is to identify relationship among motivation factor, hygiene factor, and job satisfaction of school meal chefs. The respondents included 155 school meal chefs in the survey. Data was analyzed by confirmatory factor analysis and cause-effect analysis among the constructs. After research model testing, the following results was obtained : hygiene factor was influenced directly and positively by the job satisfaction of school meal chefs. But motivation factor was not influenced directly and positively by the job satisfaction of school meal chefs.

• 소음진동
• /
• 제6권2호
• /
• pp.197-203
• /
• 1996

This study is to analyze the rotordynamic effect of surface-friction- factor characteristics on an annular seal. The honeycomb geometry which shows friction-factor-jump phenomena is used in this study. A rotordynamic analysis for a contered annular seal has been developed by incorporating empirical friction-factor model for honeycomb stator surfaces. The results of the analysis for the honeycomb seal showing the friction-factor jump is compared to the non- friction-factor-jump case. The results yield that the friction-factor-jump decreasesdirect stiffness and cross coupled stiffness coefficients, and increases damping coefficient to stabilize rotating machinery in a rotordynamic point of view. The analysis of the honeyeomb seal for the friction-factor-jump case shows reasonably good compared to experimental results, especially, for cross coupled and damping coeffcients.

• 한국초등과학교육학회지:초등과학교육
• /
• 제37권1호
• /
• pp.1-11
• /
• 2018

Factors and causal structures of pre-service elementary teachers about the critical thinking and the scientific literacy competency were investigated in this study. The third grade university students and the first grade university students in the metropolitan city participated in this study. The factor analysis method and the structural equation modeling method were used for the data analysis, and the following results were obtained. First, the third grade university students and the first grade university students recognized 'inquisitive thinking' factor and 'reflective thinking' factor as factors of the critical thinking, and 'scientific explanation' factor and 'evidence-based conclusion' factor as factors of the scientific literacy competency respectively. Second, the third grade university students showed more the influence from 'reflective thinking' factor to 'scientific explanation' factor and from 'reflective thinking' factor to 'evidence-based conclusion' factor than the first grade university students.

• 대한수학회지
• /
• 제42권4호
• /
• pp.857-869
• /
• 2005

Let $(X,\;B,\;{\mu},\;T)$ be a dynamical system and (Y, A, v, S) be a factor. We investigate the relative sequence entropy of a partition of X via the maximal compact extension of (Y, A, v, S). We define relative sequence entropy pairs and using them, we find the relative topological ${\mu}-Kronecker$ factor over (Y, v) which is the maximal topological factor having relative discrete spectrum over (Y, v). We also describe the topological Kronecker factor which is the maximal factor having discrete spectrum for any invariant measure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.196-198
• /
• 2003

The low load power factor causes various problems such as the increase of the power loss and the voltage instability. The demand of reactive power increases continuously with the growth of active power and the restructuring of electric power companies makes the integrated management of ractive power troublesome, from which the systematic control of load power factor is required. In this paper, the load power factor sensitivity of the generation cost is derived and its effects in supplying the reactive power and enhancing the load power factor are analyzed in a small-scale power system. The load power factor sensitivity of the generation cost is applied for determining the locations and capacities of reactive power compensation devices. It is shown that the generation cost can be reduced and the system power factor can be enhanced effectively using the load power factor sensitivity.

• 한국의류학회지
• /
• 제24권2호
• /
• pp.277-285
• /
• 2000

The purpose of this study was to quantify the relationship between the sense of touch and mechanical properties of man-made leather. The first was to develop the five conversion equations which convert mechanical properties of man-made leather into five factor scores, which express five factors of the sense of touch(surface property, stretchiness, thickness & weight, thermal property(warmth & coolness), and moisture property(sticky & clingy)). The second was to develop the conversion equation which converts five factor scores into score of the sense of touch. Five factor scores were predicted by the following mechanical properties; surface property factor by log2HB and (log2HB)2, stretchiness factor by logEM, thickness & weight factor by logT, log2HB, logW, thermal property factor by logT, logHB, logSMd, and moisture property factor by logMMD, RC, RC2, (logEM)2, RT2. Subsequently, these five factor scores were converted into score of the sense of touch. The predictive abilities of the developed equations were satisfied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.153-155
• /
• 2004

Various problems such as the increase of the power loss and the voltage instability may often occur in the case of low load power factor. The demand of reactive power increases continuously with the growth of active power and the restructuring of electric power companies makes the integrated management of ractive power a troublesome problem, so that the systematic control of load power factor is required. In this paper, the load power factor sensitivity of the generation cost is used for determining the locations of reactive power compensation devices effectively and for enhancing the load power factor appropriately. In addition, the integrated costs are used for determining the value of the load power factor from the point of view of the economic operation. It is shown through the application to a large-scale power system that the system power factor can be enhanced effectively and appropriately using the load power factor sensitivity and integrated costs.

• 컴퓨터교육학회논문지
• /
• 제9권3호
• /
• pp.67-74
• /
• 2006

본 연구에서는 학습자가 특정 e-러닝 프로그램을 선호하는데 영향을 미치는 다양한 요인들을 탐색해 보았다. 선호도에 영향을 미치는 다양한 변인들을 열거하고 그러한 변인들을 상관 정도에 따라 공통요인을 추출하는 탐색적 요인분석(exploratory factor analysis)를 실시하였다. 분석 결과, 학습자들이 특정한 형태의 e-러닝 프로그램을 선호하게 되는 주된 요인들은 e-러닝 프로그램의 설계방식(1 요인), e-러닝 프로그램 활용목적(2 요인), 사회문화적 쟁점(3요인), 인구학적 요소(4 요인), 조직의 요구(5요인), e-러닝 프로그램 활용결과(6요인), e-러닝 프로그램 운영관리(7 요인), e-러닝 프로그램의 기술적 환경(8 요인)으로 나타났다.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.167-173
• /
• 2012

PURPOSES : This study is to develop speed correction factor for more realistic Level-of-Service(LOS) at multilane highway. METHODS : In this study, we compared speed difference the degree of speed reductions in actual multilane road conditions with speed reduction considering speed correction factor presented in highway capacity manual using statistical techniques. And also we presents new speed correction factor analyzing collected data at national highway No.1 (Goyang~Wolrung). RESULTS : The result of analyzing and comparing new suggested speed correction factor with speed correction factor in Korea Highway Capacity Manual (KHCM) shows RMSE (Root Mean Square Error) in new speed correction factor (RMSE 1.5) is much lower than existing speed correction factor (RMSE 13.4). New suggested speed correction can be used for analyzing Level-of-Service at multilane highway. And also we suggests improvements for analysis procedure in analyzing Level-of-Service at multilane highway CONCLUSIONS : As a result of comparing differences, we draw the causes that effect the differences in speed and suggest new speed correction factor that consider traffic volumes. It can be more rational because it uses speed correction factor which can consider more realistic traffic conditions, etc.