• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.103-108
• /
• 2006

Loss of permanent molar by multiple dental caries traumatic influence or hereditable disease can cause loss of the vertical dimension in children. However traditionally reconstructive treatment to restore vertical dimension in children has been provided by using simple methods such as celluloid crown form and stainless steel crown. The presented case report describes an alternative treatment modality of vertical dimension by using removalbe appliance This appliance is made with average of facial height and maximal clenching force by using T-scan.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.425-431
• /
• 2019

This clinical case report describes the digital workflow that combines a face scan, cone beam computed tomography and an intraoral scan to visualize the outcome of prosthodontic treatment in the anterior region. This approach improves communication between clinic, laboratory and patients. A patient with healthy general condition came for a restorative treatment to treat post-traumatic central incisors of maxilla. A virtual patient replica was made by incorporating a face scan, cone beam computed tomography and an intraoral scan. Design mockup of definitive restorations was shown to the patient and modified according to the patient's desire. This digital workflow facilitates the fabrication of optimal esthetic restorations, and enhances the predictability of outcome of restorations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.64-71
• /
• 2024

The most critical aspect of full-arch prosthodontic treatment is evaluating whether the patient's vertical occlusal dimension is appropriate, and if necessary, restoring it through increasing vertical dimension. If the vertical occlusal dimension is too low, it can lead to reduced chewing efficiency, as well as not only aesthetic concerns but also potential issues like hyperactivity of muscles and posterior displacement of the mandible. This report is about the patient dissatisfied with pronunciation and aesthetics due to an inappropriate vertical occlusal dimension resulting from prior prosthetic interventions, underwent full-arch prosthodontic restoration treatment. Through the utilization of digital diagnostic apparatus, a comprehensive evaluation was undertaken for patient's vertical occlusal dimension, occlusal plane orientation, and the condition of prosthetic restorations. Through 3D facial scanning, the facial landmarks were discerned, and subsequently, the new occlusal plane was established. This provided the foundation for a digitally guided diagnostic wax-up. An elevation of 5 mm from the incisor was determined. Comprehensive dental rehabilitation was then executed for all remaining teeth, excluding the maxillary four incisors. The treatment protocol followed a systematic approach by initially creating implant-supported restorations on both sides of the dental arch to establish a stable occlusal contact. Subsequently, prosthetic restorations for the natural dentition were generated. Diagnostic and treatment planning were established through the utilization of facial scanning. This subsequently led to a reduction in treatment complexity and an expedited treatment timeline.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.249-256
• /
• 2022

The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.

• Imaging Science in Dentistry
• /
• v.32 no.1
• /
• pp.55-59
• /
• 2002

A 78-year-old woman was referred to Chonbuk National University Dental Hospital complaining of facial palsy and palpable mass on the right parotid gland area. Clinical examination showed non-specific findings of the intraoral region, but showed asymmetrical facial appearance. Panoramic view showed a large amorphous calcified mass on the posterior to the mandibular ramus and thin cortical plate of the posterior ramus. Sialogram showed constriction of the main duct and no further filling of striated, intercalated ducts and parenchymal areas. CT scans demonstrated an irregular, infiltrating mass with slight enhancement in the right parotid gland. The mass showed necrotic areas and calcifications. Bone scan showed marked accumulation of /sup 99m/Tc-MDP on the right posterior maxilla. Microscopic findings demonstrated the minimal morphologic alterations and rare mitotic figures within tumor cells, and diagnosed as adenocarcinoma (NOS, Grade II). This report could be aid in the diagnosis of calcified lesions of the salivary gland.

• Journal of Multimedia Information System
• /
• v.5 no.1
• /
• pp.15-20
• /
• 2018

There are a lot of problems in the face detection area. One of them is detecting faces by facial features and reducing number of the false negatives and positions. This paper is directed to solve this problem by the proposed triangle method. Also, this paper explans cascades, Haar-like features, AdaBoost, HOG. We propose a scheme using 12-net, 24-net, 48-net to scan images and improve efficiency. Using triangle method for frontal pose, B and B1 methods for other poses in neural networks are proposed.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.2
• /
• pp.60-63
• /
• 2016

Fibrous dysplasia is quite a rare disease usually involving maxilla and mandible. Because of its benign clinical course, conservative contouring surgery has been recommended for facial deformity. 3D rapid prototype (RP) model gives a lot of informations before operation such as depth of drilling, area of resection and important anatomic structure. The purpose of this study was to report maxilla-mandibular contouring surgery in fibrous dysplasia patients. A total of 14 consecutive patients were included for surgical and esthetic evaluation. Among 14 patients, RP model study was performed in two patients with severe facial deformity. The other patients underwent contouring surgery under conventional methods. Surgical evaluation was performed with computed tomography scan before and after operation. Surgical resection was successful and patients were satisfied with the surgical results.

• Imaging Science in Dentistry
• /
• v.36 no.3
• /
• pp.157-162
• /
• 2006

Familial gigantiform cementoma is a rare fibre-cemento-osseous disease of the jaws which appears to be transmitted as an autosomal dominant trait with variable expressivity of the phenotype. A 7-year-old girl visited DKUDH complaining of the painless facial deformity. Clinically, significant facio-lingual expansion was observed at the left maxilla, left mandibular body and symphysis portion. Malposition of lower anterior teeth was found. Panoramic radiograph and CT scan showed the extensive expansile mixed lesion at maxilla and mandible. Bone scan revealed hot spot at the maxilla and left side of mandible. Histologic examination revealed moderately dense fibrous connective tissue with scattered masses resembling cementum. The patient's mother had a history of the mandibular resection due to benign tumor. Her younger brother had buccal expansion of right mandible. We report our finding of a family that has exhibited clinical, radiographic and histologic findings consistent with the familial gigantiform cementoma.

• Archives of Craniofacial Surgery
• /
• v.20 no.3
• /
• pp.195-198
• /
• 2019

A-50-year-old male patient presented with complaint of tenderness on the left malar area after traffic accident. Our first impression on him was zygomatic fracture, we did radiologic work-up and physical examination on him. But, on the computed tomography scan, there was no fracture or discontinuity on his facial bone. The computed tomography scan was revealed a 4-cm long foreign body in left maxillary sinus with a large amount of fluid collection. After thorough history taking from him, we reveal the patient had a history of trauma 30 years back on the left zygomatic area with a chopstick. The foreign body was removed via transoral approach with the endoscopic assist. There was no complication after operation.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.381-386
• /
• 2017

PURPOSE. To integrate extra-oral facial scanning information with CAD/CAM complete dentures to immediately rehabilitate terminal dentition. MATERIALS AND METHODS. Ten patients with terminal dentition scheduled for total extraction and immediate denture placement were recruited for this study. The patients were submitted to a facial scanning procedure using the in-office PritiMirror scanner with bite registration records in-situ. Definitive stone cast models and bite records were subsequently submitted to a lab scanning procedure using the lab scanner (iSeries DWOS; Dental Wings). The scanned models were used to create a virtual teeth setup of a complete denture. Using the intra-oral bite records as a reference, the virtual setup was incorporated in the facial scan thereby facilitating a virtual clinical evaluation (teeth try-in) phase. After applying necessary adjustments, the virtual setup was submitted to a CAM procedure where a 5-axis industrial milling machine (M7 CNC; Darton AG General) was used to fabricate a full-milled PMMA immediate provisional prosthesis. RESULTS. Total extractions were performed, the dentures were immediately inserted, and subjective clinical fit was evaluated. The immediate provisional prostheses were inserted and clinical fit, occlusion/articulation, and esthetics were subjectively assessed; the results were deemed satisfactory. All provisional prostheses remained three months in function with no notable technical complications. CONCLUSION. Ten patients with terminal dentition were treated using a complete digital approach to fabricate complete dentures using CAD/CAM technology. The proposed technique has the potential to accelerate the rehabilitation procedure starting from immediate denture to final implant-supported prosthesis leading to more predictable functional and aesthetics outcomes.