References
- Shor A, Shor K, Goto Y. Rehabilitation of failing dentition with immediate denture prostheses: technique for a predictable esthetic and functional outcome. Compend Contin Educ Dent 2006;27:168-76.
- Bouma LO, Mansueto MA, Koeppen RG. A nontraditional technique for obtaining optimal esthetics for an immediate denture: a clinical report. J Prosthodont 2001;10:97-101. https://doi.org/10.1111/j.1532-849X.2001.00097.x
- Kattadiyil MT, Jekki R, Goodacre CJ, Baba NZ. Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting. J Prosthet Dent 2015;114:818-25. https://doi.org/10.1016/j.prosdent.2015.08.001
- Lozada JL, Garbacea A, Goodacre CJ, Kattadiyil MT. Use of a digitally planned and fabricated mandibular complete denture for easy conversion to an immediately loaded provisional fixed complete denture. Part 1. Planning and surgical phase. Int J Prosthodont 2014;27:417-21. https://doi.org/10.11607/ijp.3825
- Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc 2013;41:407-16.
- Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. J Prosthet Dent 2013;109:361-6. https://doi.org/10.1016/S0022-3913(13)60318-2
- Hassan B, Gimenez Gonzales B, Tahmaseb A, Jacobs R, Bornstein MM. Three-dimensional facial scanning technology: applications and future trends. Forum Implantologicum 2014:10:77-86.
- Da Silveira AC, Daw JL Jr, Kusnoto B, Evans C, Cohen M. Craniofacial applications of three-dimensional laser surface scanning. J Craniofac Surg 2003;14:449-56. https://doi.org/10.1097/00001665-200307000-00009
- Mankovich NJ, Samson D, Pratt W, Lew D, Beumer J 3rd. Surgical planning using three-dimensional imaging and computer modeling. Otolaryngol Clin North Am 1994;27:875-89.
- Cattoni F, Mastrangelo F, Gherlone EF, Gastaldi G. A new total digital smile planning technique (3D-DSP) to fabricate CAD-CAM mockups for esthetic crowns and veneers. Int J Dent 2016;2016:6282587.
- Spyropoulou PE, Razzoog ME, Duff RE, Chronaios D, Saglik B, Tarrazzi DE. Maxillary implant-supported bar overdenture and mandibular implant-retained fixed denture using CAD/CAM technology and 3-D design software: a clinical report. J Prosthet Dent 2011;105:356-62. https://doi.org/10.1016/S0022-3913(11)60071-1
- Rangel FA, Maal TJ, Berge SJ, van Vlijmen OJ, Plooij JM, Schutyser F, Kuijpers-Jagtman AM. Integration of digital dental casts in 3-dimensional facial photographs. Am J Orthod Dentofacial Orthop 2008;134:820-6. https://doi.org/10.1016/j.ajodo.2007.11.026
- Rosati R, De Menezes M, Rossetti A, Sforza C, Ferrario VF. Digital dental cast placement in 3-dimensional, full-face reconstruction: a technical evaluation. Am J Orthod Dentofacial Orthop 2010;138:84-8. https://doi.org/10.1016/j.ajodo.2009.10.035
- Joda T, Gallucci GO. The virtual patient in dental medicine. Clin Oral Implants Res 2015;26:725-6. https://doi.org/10.1111/clr.12379
- Hassan B, Gimenez Gonzalez B, Tahmaseb A, Greven M, Wismeijer D. A digital approach integrating facial scanning in a CAD/CAM workflow for full mouth implants supported rehabilitation of the edentulous patient: A pilot clinical study. J Prosthet Dent 2016 [in press].
Cited by
- Combining Intraoral and Face Scans for the Design and Fabrication of Computer-Assisted Design/Computer-Assisted Manufacturing (CAD/CAM) Polyether-Ether-Ketone (PEEK) Implant-Supported Bars for Maxilla vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/4274715
- Intraoral scanning to fabricate complete dentures with functional borders: a proof-of-concept case report vol.19, pp.None, 2017, https://doi.org/10.1186/s12903-019-0733-5
- Facially Driven Digital Diagnostic Waxing: New Software Features to Simulate and Define Restorative Outcomes vol.6, pp.4, 2019, https://doi.org/10.1007/s40496-019-00233-6
- Fully Digital Workflow with Magnetically Connected Guides for Full‐Arch Implant Rehabilitation Following Guided Alveolar Ridge Reduction vol.29, pp.3, 2017, https://doi.org/10.1111/jopr.13150
- Guided Periodontal Surgery: Association of Digital Workflow and Piezosurgery for the Correction of a Gummy Smile vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/7923842
- 2D and 3D patient's representation of simulated restorative esthetic outcomes using different computer‐aided design software programs vol.33, pp.1, 2021, https://doi.org/10.1111/jerd.12703
- Digital Jaw Relation Record of Edentulous Patients in the CAD-CAM Workflow of the Implant-Supported Full-Arch Prosthesis vol.47, pp.1, 2017, https://doi.org/10.1563/aaid-joi-d-19-00276
- Digital Jaw Relation Record of Edentulous Patients in the CAD-CAM Workflow of the Implant-Supported Full-Arch Prosthesis vol.47, pp.1, 2017, https://doi.org/10.1563/aaid-joi-d-19-00276
- Digital Workflow for Full-Arch Implant-Supported Prosthesis Based on Intraoral Scans of a Relative of the Patient vol.47, pp.1, 2017, https://doi.org/10.1563/aaid-joi-d-20-00095
- Integration of imaging modalities in digital dental workflows - possibilities, limitations, and potential future developments vol.50, pp.7, 2021, https://doi.org/10.1259/dmfr.20210268
- Morphometry and displacement analysis of the upper lips following maxillary full-arch implant-supported fixed prostheses: a 3D morphometric study vol.21, pp.1, 2017, https://doi.org/10.1186/s12903-021-01838-z
- Integration and Application of Multimodal Measurement Techniques: Relevance of Photogrammetry to Orthodontics vol.21, pp.23, 2021, https://doi.org/10.3390/s21238026