• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.219-226
• /
• 2011

Recently, study of functional clothing for vital sensing is focused on improving conductivity and decreasing resistance, in order to enhance the electrocardiogram(ECG) sensing accuracy and obtained stable environmental durability on operation condition. In this study, four ECG fabrics that having different componnt yarns and weaving structures were produced to analyze their environmental durabilities and electric properties under general operation conditions including different physical and chemical stimulation. For outstanding electric properties and physical properties, the optimized ECG sensing fabric should consist of a fabric of 2 up 3 down twill structure containing 210de silver-coated conductive yarns and polyester yarn in warp and weft directions respectively. The selected fabric has $0.11{\Omega}$ which is relative lower resistance than otherwisely produced fabrics under ECG measurement condition. And it has 7% stable resistance changes under 25% strain and repeated strain.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.298-311
• /
• 2019

In this study, the mechanical properties and hand characteristics of the knitted and woven fabrics for bedding items are investigated in accordance with fabric structural parameters including the fiber type and proportion, the density of the fabric, and the knit/weave structure. The knit stitches and structure of the knit samples made an effect on tensile properties. The bending, shear and compression properties for the knit fabric were mainly affected by fiber contents of the samples. The tensile and bending properties of woven samples were highly correlated with the fabric density, thickness and structure, and those shear and compression properties were affected by the fiber contents and structure. Consequently, the primary hand values of the selected samples we developed were estimated to have good smoothness, fullness and softness, and soft feeling, which is well correlated to the parameters of consumer preference such as softness, warmness, and bulkiness. Also, their total hand values were increased.

• 한국의상디자인학회지
• /
• 제15권4호
• /
• pp.143-155
• /
• 2013

This study examined the motif, weave structure, fabric density, and thread thickness of the patterned silks excavated from the Lady Lee's Tomb to trace the weave composition of the 18th Century in Korea. Different weave compositions were adopted depending on the weave structure. Two weave structures appeared in these patterned silks : simple gauze and satin damask. In the case of simple gauze Jergori, all the components, Gil(bodice), Somae(Sleeve) had similar fabric density and thread thickness. On the other hand, the satin damask Jergoris was composed of the components of different fabric density and thread thickness. According to the fabric density and thread thickness, the motif sharpness of damask Jergori was represented in three different ways : smooth and clear, rough and clear, and rough and vague. This revealed that Lady Lee selected not only pattern but also fabric density and thread thickness in the design of damask Jergori.

• 한국염색가공학회지
• /
• 제21권2호
• /
• pp.7-13
• /
• 2009

The effects of 0.1g/dl nonionic surfactant solutions on liquid wetting and retention properties of wool fabric are reported. The 10 different nonionic surfactants (Span 20, Tween 20, 40, 60, 80, 21, 61, 81, 65, 85), wool cloth (EMPA 217), and wool soiled cloth (EMPA 107) are used in the study. Both EMPA 217 and 107 have water contact angle($\Theta$)>$90^{\circ}$, which indicates that water spreading over a fabric surface and penetration into the fabric rarely occur. However, EMPA 217 and 107 are easily wetted with perchloroethylene(PCE) having very low values of $\Theta$'s and high values of liquid retention. Water wetting properties are greatly improved by adding nonionic surfactants into the system. Generally, hydrophilic surfactants which have low number of carbon atoms or unsaturated hydrophobic structures are effective in improving water wetting of wool fabrics. The water retention of EMPA 217 and 107 in surfactant solutions have positive relations with $cos{\Theta}$, adhesion tension, and work of adhesion. 40.3% pore volume of EMPA 217 and 26.1% pore volume of EMPA 217 can be filled with water even when we assume $cos{\Theta}=1$ (${\Theta}=0^{\circ}$).

• 패션비즈니스
• /
• 제24권3호
• /
• pp.85-100
• /
• 2020

Recently, 3D printing technology, which is suitable for small-volume production of many varieties, has become considered a key manufacturing technology in the 4th industrial revolution. However, the nature of 3D printing technology means it is not yet able to be applied to traditional textiles due to Fabric Flexibility. The aim of this study is to investigate Textile Structural Design by finding the optimal yarn thickness for Selective Laser Sintering (SLS) 3D printed structures on geogrid dobby woven fabric that gives the optimal flexibility and tensile strength in the final product. The test results for tensile load strength of the 3D printed test samples, using 1.0mm, 0.8mm, 0.6mm and 0.4mm yarn thicknesses, showed that all were found to be above 250N, this higher than the tensile strength of 180N that is recommended for textile products. Based on these results, the four dobby structural patterns with 3D printing produced had four yarn thicknesses: 1.0mm, 0.8mm, 0.6mm, and 0.4mm. The thinner the yarn, the more flexible the fabric; as such the optimal conditions to produce SLS-based 3D printed textiles with suitable strength and flexibility used a thickness of yarn in the range of 0.4mm to 0.6mm.

• Composites Research
• /
• 제22권1호
• /
• pp.15-21
• /
• 2009

본 논문에서는 편향각을 갖는 직물 복합재료 시편을 제작하여 정적 압축실험과 피로실험을 수행하고 그 결과를 비교하였다. 직물구조의 차이에 따른 압축거동을 평가하기 위해 동일한 섬유와 기지로 구성된 일방향 복합재료와 평직 복합재료의 적층순서를 동일하게 조절한 시편을 준비하였다. 정적 압축실험을 통해 편향각을 갖는 시편의 강성과 강도를 측정하였고, 측정된 강도를 바탕으로 압축강도 예측식을 제안하였다. 피로실험을 통해 복합재료의 직물 구조의 차이에 의한 피로수명의 변화를 관찰하였으며, 편향각의 변화와 하중조건에 따른 피로수명의 차이를 비교하였다.

• Architectural research
• /
• 제3권1호
• /
• pp.45-52
• /
• 2001

In this paper, a pressurized single vertical arch and a pressurized leaning arch composed of flexible fabric material are considered. These arches have also been considered as a possible support structure for the tent-like structures. Two different boundary conditions are considered in leaning arches with fixed bases and pinned bases. The behaviors of the leaning arches are investigated for two tilt angles as 15, 30. For each angle, two loading conditions are considered as uniformly distributed load and wind loads. The F.E.M. is used through the all analysis procedures. For the results, load-deflection relationships, buckling modes, differences between two boundary conditions and deformed configurations are discussed.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.849-856
• /
• 2006

In this paper, fabric composite draping on hemisphere moulds were studied to find out the deformation behaviour of micro-tow structures of fabrics during draping and thermoforming. Aluminium and PVC foams were used to fabricate the hemisphere moulds for draping tests. In order to observe the local tow deformation pattern during the draping several specimens for microscopic observation were sectioned from the draped hemisphere structures. The effect of forming condition and mould properties on tow deformation was investigated by the microscopic observation of the tow parameters such as crimp angle. Normalization scheme was performed to compare tow parameter variations with different forming conditions. Stress-strain .elations of two different PVC foams (HT70 and HT110) were tested to investigate the effect of foam property on the micro-tow deformation during forming.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.198-201
• /
• 2004

This paper aims to investigate the micro-mechanical behaviour of tow geometry with forming pressures and densities of foams during the curing process of plain weave carbon fibre fabric prepregs onto polymer foams. In order to find out and compare deformation patterns between different forming conditions, tow parameters such as amplitude and crimp angle etc. are investigated. From the observation results, geometric difference in the tow architecture with respect to forming conditions and foam characteristics were found. To observe the micro-deformation of the fabric structure, appropriate specimens from carbon fibre-foam sandwich structures are sectioned and observed under the microscope.

• 한국의상디자인학회지
• /
• 제10권3호
• /
• pp.1-13
• /
• 2008

The purpose of this research is to study the cause of obstruction in various knit pattern structures by understanding the needs of the customers, and to develop knitted fabric goods that satisfy the individual taste of consumers and that reflecting the latest fashions. Actual conditions of the manufacturer's designing processes must be examined. In addition, a comparison analysis of fashion sensibilities and preferences between producers and consumers had been made in order to study developing knit pattern structures. Questionnaires and interviews had been used as research methods. The research involved two groups: one group consisted of 57 producers, which included designers, programmers, and merchandisers working for a knit manufacturer in Seoul, while the other group consisted of 74 consumers, which included students with knitted fabric design as their major and those who have working knowledge of knitted fabrics. For a more accurate evaluation, 28 out of 150 patterns have been selected through a preliminary study conducted by 24 designers. On the 28 knit patterns, a sensibility evaluation had been made through the use of the sense of sight and sense of touch, which was followed by a frequency analysis, cluster analysis, and t-test using SPSS 12.0. The results are as follows: the fashion sensibility evaluation on knit patterns showed that structures, such as racking II or lace II, are typically elegant ('elegance'), while structures, such as links I or racking I, are typically 'active.' Furthermore, a 'country' image was displayed in structures such as cable I, cable II, and miss II. Links I appeared as 'sophisticated'. Miss I and milano were said to have 'modem' images. Lace II was regarded as 'ethnic', while racking II was said to have a 'romantic' image. 2:1 rib and milano were generally thought to be manly ('manish'). The fashion sensibility scale for each knit pattern has been made based on the above results. Based on producer and consumer responses, the sensibility evaluation on knit pattern structures showed that the two groups had similar preferences in knit pattern structures. Therefore, the fashion sensibility scale developed in this study can be used as a basic data for structure development when designing knitted fabric goods.