• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.6
• /
• pp.851-856
• /
• 2011

This study was conducted to evaluate the effects of flavor supplementation on pre- and post-weaning performance and behavior of piglets and sows. A total of 30 sows (Landrace${\times}$Yorkshire) and their litters were employed in this study. Sows were randomly assigned to 3 dietary treatments (10 replications per treatment). Dietary treatments included: i) CON, basal diet; ii) TRT1, CON+0.1% vanilla supplement; iii) TRT2, CON+0.1% cheese supplement. The behavior of sows (nursery, eating and standing) and piglets (eating, sleeping and fighting) in each treatment was monitored throughout experiment. Each piglet was weighted at 5, 10, 15 and 21 d after birth to evaluate the average daily gain. Sows and piglets were bled on the weaning d to evaluate the blood characteristics. Back fat and estrus interval were investigated. In this study, there were no differences (p>0.05) in diarrhea score and blood characteristics among treatments. Likewise, the behavior was not influenced (p>0.05) by the dietary flavor supplementation. However, administration of flavor increased (p<0.05) the pre-weaning feed intake, post-weaning average daily gain (ADG) and gain/feed (G/F) ratio. No significant difference was observed (p>0.05) on the blood characteristics, behavior, backfat loss and estrus interval among treatments. In conclusion, administration of flavor could increase creep feed intake pre-weaning and piglet ADG post-weaning, whereas inclusion of flavor had no influence on blood characteristics and performance in sow and piglets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.6
• /
• pp.827-835
• /
• 2009

Insulin has crucial roles in energy metabolism in all mammals but has been less studied in ruminants. An experiment was conducted to investigate the effects of hypoinsulinemia induction on appetite, performance, carcass composition and blood metabolite levels in sheep. Treatments were intravenous injection of four doses of streptozotocin; 0, 25, 50 and 75 mg/kg BW named C, L, M and H, respectively. Twenty male lambs were divided into four treatment groups. Animals in group H could not continue the experiment because of abnormalities. The duration of the experiment was eight consecutive weeks, and injection was performed at the end of week 3. Feed and water intakes were measured weekly and weight changes of animals were recorded and used for calculation of other growth parameters. Blood samples were collected weekly via venipuncture at fasting and 2.5 h post-prandial and analyzed for hormones and blood metabolites. Results showed a marked hypoinsulinemia in group M with significant decrease in fasted and postprandial insulin concentrations and also fasted leptin concentrations vs. the control group C (p<0.05). Group M showed significant increases in blood glucose, triglycerides, cholesterol, total protein, blood urea nitrogen and ketone body levels vs. group C (p<0.05). After injection, animals in group M showed diabetic hyperphagia and enhanced water intake as compared to group C (p<0.05) but, despite increased feed intake, they did not gain more weight than controls (p<0.05), and consequently, their feed conversion ratio was greater. Protein and fat contents of meat and liver were not significantly different among groups (p>0.05). In conclusion, the results suggested a regulatory role of insulin in energy metabolism of ruminants by exerting two opposing effects; central catabolic and peripheral anabolic.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.12
• /
• pp.1734-1741
• /
• 2012

This trial was performed to study the effects of replacing soybean meal (SBM) with fermented rapeseed meal (RSM) on growth performance, serum biochemistry variable and intestinal morphology of broilers. A total of 640 d-old Arbor Acres broiler chicks were randomly allocated to 4 dietary treatments, 4 pens per treatment and 40 birds per pen for a 6-wk feeding trial. In the four treatment groups, fermented RSM replaced soybean meal at 0, 5, 10, and 15%, respectively. On 21 d and 42 d, two birds from each pen were randomly selected and slaughtered. Blood samples and sections of duodenum, jejunum, and ileum were collected for measurement of serum biochemical variables and intestinal morphology, respectively. Results showed that body weight gain (BWG) and feed conversion (FC) were significantly (p<0.01) poorer for birds fed the 15% fermented RSM diet than those fed with 0, 5 and 10% fermented RSM diets during all periods. Compared with 0 and 5% fermented RSM groups, IgG content in the serum of birds in 10 and 15% fermented RSM groups was improved (p<0.01) urea nitrogen content of serum was reduced (p<0.01) during both growing and finishing periods. However, IgM, phosphorus and calcium levels increased (p<0.05) only during the growing period. Increased (p<0.05) villus height was observed in the duodenum and jejunum of broilers fed the diet with 10% fermented RSM. In addition, villus height to crypt depth ratio in the jejunum was significantly higher (p<0.01) for birds fed the diet with 10% fermented RSM than for those fed diets with 0, 5 and 15% fermented RSM. The present results suggest that RSM fermented with Lactobacillus fermentum and Bacillus subtilis is a promising alternative protein source and that it could be safely used replace up to 10% SBM in broiler diets.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.535-538
• /
• 1994

In this paper, an isolated ZVS-PWM boost converter is proposed for single stage line conversion. For power factor correction, we used the half bridge topology at the primary side of isolation transformer permitting switching devices to operate under ZVS by using circuit parastics and operating at a fixed duty ratio near 50%. Thus the relatively continuous input current distortion and small size input filter are also achievable. The ZVS-PWM boost operation of the proposed converter can be achieved by using the boost inductor $L_f$, main switch $Q_3$, and simple auxiliary circuit at the secondary side of isolation transformer. The secondary side circuit differ from a conventional PWM boost converter by introduction a simple auxiliary circuit. The auxiliary circuit is actived only during a short switching transition time to create the ZVS condition for the main switch as that of the ZVT-PWM boost converter. With a single stage, it is possible to achieve a sinusoidal line current at unity power factor as well as the isolated 48V DC output. Comparing to the two stage schemes, overall effiency of the proposed converter is highly improved due to the effective ZVS of all devices as well as single stage power conversion. Thus, it can be operated at high switching frequency allowing use of small size input filter. Minimum voltage and current stress make it high power application possible.

• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.139-145
• /
• 2014

Nowadays, most micro-patterns are manufactured during flow line production. However, a conventional rotary chemical mechanical polishing (CMP) system has a limited throughput for the fabrication of large and flexible electronics. To overcome this problem, we propose a novel linear roll-CMP system for the planarization of large-area electronics. In this paper, we present a statistical analysis on the linear roll-CMP process of copper-clad laminate (CCL) to determine the impacts of process parameters on the material removal rate (MRR) and its non-uniformity (NU). In the linear roll-CMP process, process parameters such as the slurry flow rate, roll speed, table feed rate, and down force affect the MRR and NU. To determine the polishing characteristics of roll-CMP, we use Taguchi's orthogonal array L16 (44) for the experimental design and F-values obtained by the analysis of variance (ANOVA). We investigate the signal-to-noise (S/N) ratio to identify the prominent control parameters. The "higher is better" for the MRR and "lower is better" for the NU were selected for obtaining optimum CMP performance characteristics. The experimental and statistical results indicate that the down force and roll speed mainly affect the MRR and the down force and table feed rate determine the NU in the linear roll-CMP process. However, over 186.3 N of down force deteriorates the NU because of the bending of substrate. Roll speed has little relationship to the NU and the table feed rate does not impact on the MRR. This study provides information on the design parameter of roll-CMP machine and process optimization.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.179-198
• /
• 2004

Organic electroluminescent devices are light-emitting diodes in which the active materials consist entirely of organic materials. Recently, many fluorescent organic materials have been reported and the study on synthesis and application of new organic light-emitting materials has been demanded. This paper reports the optical and electrical characteristics of OLEDs using novel polymers containing biphenyl structure. First, Optical properties of novel light-emitting biphenyl derivatives doped with poly(9-vinyl carbazole)(PVK) and emitted blue, bluish green color, which is attributed to the overlap area between PL spectrum of host(PVK) and absorption spectra of guests(polymer). This is correspondent with F$\"{o}$rster energy transfer process in the blends. And, OLED devices were fabricated using poly (3,4-ethylenedioxy thiophene) (PEDOT) as a hole injection material and tris-(8-hydroxyquinoline) aluminum ($Alq_3$) as an electron transporting material. EL devices fabricated as ITO/PEDOT/PVK doped with biphenyl derivatives/$Alq_3$/Li:Al and I-V-L chatacteristics and emitting efficiency of EL devices were examined. Finally, the drift mobility of PVK doped with biphenyl derivatives and $Alq_3$ were measured by TOF technique varying applied electric field. EL efficiency was increased as the ratio of hole mobility of PVK doped with biphenyl derivatives and electron mobility of $Alq_3$ was close to one.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.415-422
• /
• 2008

This study was carried out to investigate the effect of operating and design conditions of gas dispersion type of absorber on $SO_2$ removal efficiency. pH difference between upper and lower part of gas dispersing plate of absorber was 0.2, which was relatively low. This was supposed that recirculation capacity of absorbing liquid between froth zone and reaction zone of absorber be increased by oxidation air injection through liquid riser which acted as liquid pump. Test results showed that $SO_2$ removal efficiency was more sensitive than absorber ${\Delta}P$. High $SO_2$ removal even at lower pH resulted from very low concentration of $HSO_3^-$ ion in absorbing liquid because of direct supply of dissolved oxygen into froth zone. 96% of $SO_2$ removal efficiency was obtained under the condition of absorber pH 5.2, flue gas flow rate of $1,530\;Nm^3/hr$, inlet $SO_2$ concentration of 800 ppm, absorber ${\Delta}P$ of 250mmAq. The following equation by a multiple linear regression was obtained to describe the relationship between $SO_2$ removal and operating variables. $$f=1-{\exp}(-1.3939+1.060pH+0.0139{\Delta}P-0.00267G-0.000064SO_2Conc.),\;R^2=0.9719$$

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.29-41
• /
• 2006

This study was to investigate the effect of adding additive as tannin, rice husk and charcoal, for reducing the formaldehyde emission level, on the adhesion properties of urea-formaldehyde (UF) resin for particleboard. We controlled the hot-pressing time, temperature and pressure to determine the bonding strength and formaldehyde emission. Blends of various UF resin/additives (tannin, rice husk and charcoal) compositions were prepared. To determine and compare the effect of additives (tannin, rice husk and charcoal) content, 0, 5, 10 and 15%, by weight of UF resin, were used. $NH_4Cl$ as hardener added. To determine the level of formaldehyde emission, we used the desiccator, perforator and 20 L-small chamber method. The formaldehyde emission level decreased with increased additions of additive (except rice husk). Also, increased hot-pressing time decreased formaldehyde emission level. At a charcoal replacement ratio of only 15%, the formaldehyde emission level is under F ✩ ✩ ✩ ✩ grade (emit < $0.3mg/{\ell}$). Curing of the high tannin additive content in this adhesive system indicated that the bonding strength increased. But, in the case of rice husk and charcoal, the bonding strength was much lower due to the inorganic substance. Furthermore, rice husk was poor in bonding strength as well as formaldehyde emission than tannin and charcoal.

• KSBB Journal
• /
• v.19 no.1
• /
• pp.57-61
• /
• 2004

A peroxynitrite is formed when superoxide and nitric oxide exist at near eqimolar ratio in biological systems. Although not a free radical by chemical nature, peroxynitrite is a powerful oxidant having a wide array of tissue damaging effects ranging from lipid oxidation and inactivation of enzymes and ion channels through protein oxidation and nitration to inhibition of mitochondrial respiration. During our search for new antioxidizing components from natural resources, twenty salt marsh plants were screened for their ONOO and DPPH radical scavenging activities. Among them, methanol extract of Rosa rugosa, lxeris tamagawaensis, Erigeron annus, Tetragonia tetragonoides, Imperata cylindrica, and Suaeda japonica inhibited more than 85% of peroxynitrite produced by 3-morpholinsydnonimine (SIN-1) at a concentration of 5 $\mu\textrm{g}$/$m\ell$. In addition, Rosa rugosa, Artemisia capillaris, Erigeron annus and Ixeris tamagawaensis showed significant scavenging effect against DPPH (1,1-diphenyl-2-picrylhydrazyl radical).

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1712-1716
• /
• 2004

Copper-bearing montmorillonite (Cu-MMT) was produced by $Cu^{2+}$ cation exchange reaction. X-ray diffraction analysis showed that that the (001) basal spacing of the MMT crystal lattice increased from 1.544 to 1.588 nm after $Cu^{2+}$ exchange. This indicated that $Cu^{2+}$ entered into interlayer position of MMT as a hydrated cation or composite cation. In vitro results indicated that Cu-MMT had antibacterial activity on Escherichia coli $K_{88}$. Cu-MMT had unbalanced positive charge after cation exchange. Its antibacterial activity resulted from two aspects, one was electrostatic attraction which made E. coli $K_{88}$ being adhered on the montmorillonite surface, the other was the $Cu^{2+}$ slowly released, which could kill bacteria. In an in vivo study, four replicates of eight weanling pigs were assigned to each of two dietary treatments to study the effects of Cu-MMT on diarrhea, E. coli in the lumen of the jejunum and morphology of jejunal mucosa. As compared to the control, supplementation of the diet with 0.2% Cu-MMT improved average daily gain by 12.50% (p<0.05) and decreased F/G by 9.42% (p<0.05). The mean diarrhrea incidence was decreased by 71.80% (p<0.05). The viable counts of Escherichia coli in jejunal contents were significantly reduced (p<0.05). Villus height and the villus height to crypt depth ratio at the jejunal mucosa were increased by 19.09% (p<0.05) and 37.10% (p<0.05), respectively.