Reduction of Formaldehyde Emission from Particleboardsby Bio-Scavengers

  • Eom, Young-Geun (Department of Forest Products, College of Forest Science, Koomin National University) ;
  • Kim, Jong-Sung (Department of Forest Products, College of Forest Science, Koomin National University) ;
  • Kim, Sumin (Lap. of Adhesion & Bio-Composites, Major in Environmental Material Science, Seoul National University) ;
  • Kim, Jin-A (Lap. of Adhesion & Bio-Composites, Major in Environmental Material Science, Seoul National University) ;
  • Kim, Hyun-Joong (Lap. of Adhesion & Bio-Composites, Major in Environmental Material Science, Seoul National University)
  • Received : 2006.01.09
  • Accepted : 2006.05.21
  • Published : 2006.09.25

Abstract

This study was to investigate the effect of adding additive as tannin, rice husk and charcoal, for reducing the formaldehyde emission level, on the adhesion properties of urea-formaldehyde (UF) resin for particleboard. We controlled the hot-pressing time, temperature and pressure to determine the bonding strength and formaldehyde emission. Blends of various UF resin/additives (tannin, rice husk and charcoal) compositions were prepared. To determine and compare the effect of additives (tannin, rice husk and charcoal) content, 0, 5, 10 and 15%, by weight of UF resin, were used. $NH_4Cl$ as hardener added. To determine the level of formaldehyde emission, we used the desiccator, perforator and 20 L-small chamber method. The formaldehyde emission level decreased with increased additions of additive (except rice husk). Also, increased hot-pressing time decreased formaldehyde emission level. At a charcoal replacement ratio of only 15%, the formaldehyde emission level is under F ✩ ✩ ✩ ✩ grade (emit < $0.3mg/{\ell}$). Curing of the high tannin additive content in this adhesive system indicated that the bonding strength increased. But, in the case of rice husk and charcoal, the bonding strength was much lower due to the inorganic substance. Furthermore, rice husk was poor in bonding strength as well as formaldehyde emission than tannin and charcoal.

Keywords

Acknowledgement

Supported by : Kookmin University

References

  1. Baekeland, L. H., U. S. Patents 939,966; 942,699; 942,809. German patents 233, 803; 237, 790; 281,454
  2. Bisanda, E. T. N. 2003. Characterisation of tannin resin blends for particleboard applications. Cement & Concrete Composites 25(2): 593-598 https://doi.org/10.1016/S0958-9465(02)00072-0
  3. Butlerov, A. M. 1859. Uber einige Derivate des Jodmethylens. Justus Liebigs Ann. Chem., 111:242-252 https://doi.org/10.1002/jlac.18591110219
  4. Carlson, F. E., E. K. Phillips, S. C. Tenhaeff, and W. D. Detlefsen. 1995. Study of formaldehyde and other organic emissions from pressing of laboratory oriented strand board. Forest Prod. J. 45(3): 71-77
  5. Dunky. M. 1998. Urea-formaldehyde (UF) adhesive resins for wood. International Journal of Adhesion & Adhesives 18: 95-107 https://doi.org/10.1016/S0143-7496(97)00054-7
  6. Ernst, K. 1982. Die verschiedenen Herstellverfahren fur Spanplatten der Emissionsklasse EI. Holz Roh- Werkst., 40: 249-253 https://doi.org/10.1007/BF02610533
  7. Hofmann. A. W. 1868. Zur Kenntnis des Methyladehyds. Justus Liebigs Ann. Chem., 145:357-361 https://doi.org/10.1002/jlac.18681450312
  8. Kavvouras. P. K., D. Koniditsiotis, and J. Petinarakis. 1998. Resistance of Cured Urea-Formaldehyde Resins to Hydrolysis : A Method of Evaluation. Holzforschung 52: 105-110 https://doi.org/10.1515/hfsg.1998.52.1.105
  9. Kim. H.-J. and Y.-G. Eom. 2001. Thermogravimetric Analysis of Rice Husk Flour for a New Raw Material of Lignocellulosic Fiber-Thermoplastic Polymer Composites. Mokchae Konghak 29(3): 59-67
  10. Kim. S. and H.-J. Kim. 2002. Application & Chemistry of Tannin-based Adhesives. Adhesion and Interface 3(3)
  11. Kim. S. and H.-J. Kim. 2004. Evaluation of formaldehyde emission of pine and wattle tanninbased adhesives by gas chromatography. Holz Roh Werkst 62: 101-106 https://doi.org/10.1007/s00107-003-0441-2
  12. Kim. S., H.-J. Kim, H.-S. Kim, and H. H. Lee. 2006. Effect of Bio-scavengers on the curing behavior and bonding properties of melamine-formaldehyde resins. Macromolecular Materials and Engineering. 291:1027-1034 https://doi.org/10.1002/mame.200600213
  13. Kim. S., Y.-G. Lee, and H.-J. Kim. 2003. Physico-mechanical properties of particleboards bonded with pine and wattle tanninbased adhesives. International Journal of Adhesion & Adhesives. 17(14): 1863-1875
  14. Lee. Y.-G., S. Kim, and H.-J. Kim. 2003. Mechanical Properties of Rice Husk Flour-Wood Particle board by Urea-Formaldehyde Resin. Mokchae Konghak 31(3): 42-49
  15. Levendis. D., A. Pizzi, and E. Ferg. 1992. The Correlation of Strength and Formaldehyde Emission with the Crystalline/Amorphous Structure of UF Resins. Holzforschung 46: 263-269 https://doi.org/10.1515/hfsg.1992.46.3.263
  16. Meyer, B., B. A. K. Andrews, and R. M. Reinhardt. 1986. Formaldehyde Release from Wood Products. ACS Symposium Series No. 316. Washington, DC, American Chemical Society
  17. Pizzi. A., L. Lipschitz, and J. Valenzuela. 1994. Theory and Practie of the Preparation of Low Form aldehyde Emission UF Adhesives. Holzforschung 48: 254-261 https://doi.org/10.1515/hfsg.1994.48.3.254
  18. Pizzi, A. 1983. Release of formaldehyde by wood products. In : Wood Adhesives Chemistr and Technology. Eds. Pizzi, A. Chapter 10. Marcel Dekker, Inc., New York. pp. 307-388
  19. Pizzi. A. 1994. Theory and Practice of the Preparation of Low Formaldehyde Emission UF Adhesives. Holzforschung 48(3): 254- 261 https://doi.org/10.1515/hfsg.1994.48.3.254
  20. Plath, L. 1966. Bestimmung der Formal dehydabspaltung aus Spanplatten nach der Mikrodiffusionsmethode. Holz Roh- Werkst., 24: 312-318 https://doi.org/10.1007/BF02605296
  21. Roffael, E. 1982. Die Formaldehyd-Abgabe von Spanplatten und anderen Werkstoffen. Stuttgart, DRW-Verlag
  22. Sundin, B. 1985. The formaldehyde situation in Europe. Proceedings of the $19^{th}$ Particleboard Symposium at Washington State University, Pullman, pp. 255-276
  23. Sundin, B., B. Mansson, and E. Endrody. 1997. Particleboard with Different Contents of Releasable Formaldehyde. A Comparison on the Board Properties, Including Results from Different Formaldehyde Tests. Proceedings of the $21^{st}$ Particlevoard Symposium, Washington State University, Pullman, pp. 139-186
  24. Thomas. J. Kelly. 1999. Emission Rates of Formaldehyde from Materials and Consumer Products Found in California Homes. Environ. Sci. Technol. 33: 81-88 https://doi.org/10.1021/es980592+