• Title/Summary/Keyword: external performance

Search Result 2,870, Processing Time 0.033 seconds

Discussion on the Strategic Priorities and Navy's Coping in the Interwar Period Britain, 1919?1939 (「전간기 영국의 전략 우선순위 논의와 영국해군의 대응, 1919-1939」)

  • Jeon, Yoon-Jae
    • Strategy21
    • /
    • s.32
    • /
    • pp.123-159
    • /
    • 2013
  • The purpose of this research paper is to re-valuate the factors that affected the Royal Navy's rearmament and preparation for war by conducting analysis on the discussion held in the Britain on the strategic priorities and Navy's coping measures adopted during the interwar period. After the end of the WWI, each of the military arms of the Britain faced significant difficulty in securing budget and increasing their military power all throughout the interwar period, and the Navy was not an exception. The WWII that got started on September 1939 was the turning point in which this difficulty led to full-fledged crisis. Immensely many criticisms followed after the war and problems were identified when it comes to the Royal Navy's performance during the war. This type of effort to identify problem led to the attempt to analyze whether Royal Navy's preparation for war and rearmament policy during interwar period were adequate, and to identify the root causes of failure. Existing studies sought to find the root cause of failed rearmament from external factors such as the deterioration of the Britain itself or pressure from the Treasury Department to cut the budget for national defense, or sought to detect problems from the development of wrong strategies by the Navy. However, Royal Navy's failed preparation for the war during interwar period is not the result of one or two separate factors. Instead, it resulted due to the diverse factors and situations that the Britain was facing at the time, and due to intricate and complex interaction of these factors. Meanwhile, this research paper focused on the context characterized by 'strategic selection and setting up of priorities' among the various factors to conduct analysis on the Navy's rearmament by linking it with the discussion held at the time on setting up strategic priorities, and sought to demonstrate that the Navy Department's inadequate counter-measures developed during this process waned Royal Navy's position. After the end of WWI, each of the military arms continued to compete for the limited resources and budget all throughout the interwar period, and this type of competition amidst the situation in which the economic situation of Britain was still unstable, made prioritization when it comes to the allocation of resources and setting up of the priorities when it comes to the military power build-up, inevitable. Amidst this situation, the RAF was able to secure resources first and foremost, encouraged by the conviction of some politicians who were affected by the 'theory of aerial threat' and who believed that curtailing potential attack with the Air Force would be means to secure national security at comparatively lower cost. In response, Navy successfully defended the need for the existence of Navy despite the advancement of the aerial power, by emphasizing that the Britain's livelihood depends on trade and on the maintenance of maritime traffic. Despite this counter-measuring logic, however, Navy's role was still limited to the defense of overseas territory and to the fleet run-off instead of sea traffic route production when it comes to the specific power build-up plan, and did not understand the situation in which financial and economic factors gained greater importance when it comes to the setting up of strategic priorities. As a result, Navy's plan to build its powers was met with continual resistance of the Treasury Department, and lost the opportunity to re-gain the status of 'senior service' that it had enjoyed in the past during the competition for strategic prioritization. Given that the strategic and economic situation that Korea faces today is not very different from that of the Britain during the interwar period, our Navy too should leverage the lessons learned from the Royal Navy to make the effort to secure viable position when it comes to the setting of priorities in case of national defense strategy by presenting the basis on why maritime coping should be prioritized among the numerous other threats, and by developing the measures for securing the powers needed effectively amidst the limited resources.

  • PDF

Study on the Effect of Bizcool Education Satisfaction to Career Awareness - Focused on the Differences among Students (창업교육(Bizcool) 만족도가 진로인식에 미치는 영향 연구)

  • Moon, Kyoung Mok;Yang, Young Seok;Kim, MyoungSook
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.8 no.4
    • /
    • pp.9-23
    • /
    • 2013
  • 'Entrepreneurship' spread like fashion, then it was a term that is no stranger to the youth. Entrepreneurship education for young people is being activated. Recently conducted many educational institutions, as well 'Bizcool' entrepreneurship education. Performance will be clear that the purpose of education and, where appropriate, external training. Currently operating business through 'Bizcool' homepage, 'Bizcool' budget is concentrated in high school. Entrepreneurship education are made aware of the need to equip the correct career awareness is spreading. Preliminary founder, as well as for students. Students will be more structured training support. And many more will be supported by the budget. Therefore, the present study is to analyze the impact of entrepreneurship education career awareness satisfaction. And try to give elementary school students, middle school students, high school students due to the difference in effective entrepreneurship education and ways to activate. The first result, entrepreneurship education training information satisfaction has a significant impact on the career awareness. Satisfaction of the second result, entrepreneurship education teaching methods have a significant impact on the career awareness. The third result, operating the way entrepreneurship education has a significant impact on the recognition of the career satisfaction. The difference between the fourth result, depending on the satisfaction of the entrepreneurship education, career awareness, depending on the level of education does not represent. This study, the results of entrepreneurship education has a positive impact on the career recognition. And have a positive 'Bizcool' education could help implication. However, did not differ according to the difference in student career awareness. So I think it would need more concrete preparation. Also want to provide entrepreneurship education opportunities to students based on the results of this study a little more evenly. Career awareness for students through entrepreneurship education from an early age who would establish the correct values. And students will have a huge impact on the development of the society. The purpose of this study was a survey of students who participated in the 2012 'Bizcool Camp'. This study derives meaningful results. But will need to be interpreted with caution. Some students are first surveyed who participated in the 2012 'Bizcool Camp'. Therefore, there is a limit to generalize the findings. Second, junior high school students surveyed rate is low. So there are limits to students representing the difference. Third, most survey respondents per participant. Therefore, the study subjects, as there is a limit. This study, the impact of career awareness, youth entrepreneurship education satisfaction were analyzed by student differences. The results of this study, more study will be needed for students.

  • PDF

Study on economic effects of outsourcing of food materials on the hotel kitchen - Focus on cooking Western food in the first class hotel - (식재료 아웃소싱이 경제적 주방에 미치는 영향에 관한 연구 - 특1급호텔 양식조리를 중심으로 -)

  • 성태종
    • Journal of Applied Tourism Food and Beverage Management and Research
    • /
    • v.13 no.2
    • /
    • pp.45-69
    • /
    • 2002
  • This study is designed to examine feasibility and limitation of outsourcing in cooking Western food in a hotel, to interpret importance of outsourcing(eg. outside order, outside procurement, outside supply) in a broad sense in order to reinforce the core capacity in the cooking department, and to know whether the cooking human power is efficiently used and how much the chefs recognize outsourcing of food materials. As many companies conduct restructuring to cut down its size, the reduction of human power led the Western food cooking in the hotel to lower core capacities, lower quality, and lower efficiency. In addition, the sagging morale of chefs undermined creativity. To change from the traditional kitchen to an economic kitchen needs to look into importance of outsourcing, cognitive attitude of chefs, relation with outside suppliers. Here suggests performance of positive changes in the structure The study examined feasibility and limitation of outsourcing in the hotel kitchen as well as chefs' cognitive attitude toward outsourcing of food materials to reinforce core capabilities of the hotel kitchen. 1. Companies of outsourcing are selected according to variability of price conditions, flexibility of contract conditions, popularity of the outsourcing company, and reputation of the outsourcing company. 2. The importance of outsourcing in the Western food cooking is divided into 4 factors such as standard of selecting outsourcing companies, policies of cooking manu, quality of cooking, and quantity of cooking. 3. The most feasible section in outsourcing of food materials is a process of kneading flour for bread, which shows that many Western-food chefs expect to put higher possibility of outsourcing on the kneading. In other words, when it comes to confectionery and bakery, there are many outside expert processing companies supplying high quality products. In the order of outsourcing feasibility, sauce is followed by processed vegetable, garnish of main dish, and soup. The least feasible section in outsourcing of food materials is appetize. Appetize includes a concept of a improvised dish and needs speed. Due to its color, freshness, and sensibility of taste, the appetize plays a key role in the Western food cooking. 4. When outsourcing is taken in place, the highest risk is to lower the inner cooking skills. Therefore chefs in charge of the Western food sequently recognize both internal problems including storage of cooking skills, unstability of layoffs, and loss of cooperation between departments, and external problems including inferior goods, difficulty of differentiating manu, delay of delivery, and expiration date. It shows that most of the Western food chefs consider risks of the internal problems at first. 5. A effective outsourcing needs appropriate selection of outsourcing companies, maintenance of credibility, active communication, check and management of hygiene. However regardless of their position or career, chefs in charge of the Western food have the same cognitive attitude toward selecting successful outsourcing companies after the outsourcing system is enforced. The core of cooking, or a final stage in the full process of so-called artistic cooking, should be treated with insourcing. Reduction of several cooking processes resulted in shortened cooking time, increased efficiency, faster cooking, cutting the waiting-lines, and finally more room for customers. The outsourcing system can reduce or eliminate the following processes in cooking: buying various food materials, checking, storing, preparing, and processing. Especially in the Western food cooking department of a hotel, the outsourcing system should be enforced to make an economic kitchen and to efficiently manage it. Wow it's time to change from the traditional kitchen to an economic kitchen in the hotel cooking department. For that, the cooking department should become a small but strong organization by outsourcing except its core work.

  • PDF

Developmental Plan of Man-Overboard Alert Devices of Small Fishing Vessels: A Study (소형어선의 선외추락 경보장치 개발 방안 연구)

  • Kim, Jae-Won;Kim, Byung-Ok;Lim, Jung-Gyun;Lee, Ju-Han;Yim, Jea-Hong;Park, Dong-Kook
    • Journal of Navigation and Port Research
    • /
    • v.42 no.4
    • /
    • pp.245-252
    • /
    • 2018
  • A method of transmitting an alert signal in case of man-overboard (MOB) systems in a small fishing vessel navigating within coastal area is being operated as VHF-DSC equipment via a distress alert button and V-P ass Equipment via alert button or beacon separation. However, a small fishing vessel with a couple of crews on board is an inappropriate way to alert a man-overboard condition. However, internationally, MOB equipment using VHF-DSC, AIS, and Bluetooth technologies is used to transmit alert signals directly to the mother ship and other radio stations. In order to analyze the performance and technology of the MOB equipment operating in foreign countries, it was confirmed that the alarm signal can be received within a maximum of one nautical mile when the MOB device is on the water surface. An MOB device that meets domestic conditions needs to send an alarm signal to a station within the VHF communication range. However, in order to reduce the false alert signal, it is most appropriate to operate the VHF-DSC radio equipment installed on the ship remotely. Analysis of various technologies connecting the MOB and the VHF-DSC revealed that the Bluetooth system has advantages such as device miniaturization. When an emergency signal is transmitted from the MOB device, it can be received by a dedicated receiver and recognized through an external input terminal of the VHF-DSC equipment generating its own alarm. If the emergency situation cannot be processed at the mother ship, a distress alert is sent to all radio stations via VHF-DSC for response under emergencies faced by small fishing vessels.

Application of CMP Process to Improving Thickness-Uniformity of Sputtering-deposited CdTe Thin Film for Improvement of Optical Properties (스퍼터링 증확 CdTe 박막의 두께 불균일 현상 개선을 위한 화학적기계적연마 공정 적용 및 광특성 향상)

  • Park, Ju-Sun;Lim, Chae-Hyun;Ryu, Seung-Han;Myung, Kuk-Do;Kim, Nam-Hoon;Lee, Woo-Sun
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2010.06a
    • /
    • pp.375-375
    • /
    • 2010
  • CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

  • PDF

Biological Monitoring of Paint Handling Workers exposed to PAHs using Urinary 1-Hydroxypyrene (다핵방향족탄화수소류에 노출된 페인트 취급 근로자에서 요 중 1- Hydroxypyrene을 이용한 생물학적 모니터링)

  • Lee, Jong-Seong;Kim, Eun-A;Lee, Yong-Hag;Moon, Deog-Hwan;Kim, Kwang-Jong
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.15 no.2
    • /
    • pp.124-134
    • /
    • 2005
  • To investigate the exposure effect of polynuclear aromatic hydrocarbons (PAHs), we measured airborne total PAHs as an external dose, urinary 1-hydroxypyrene (1-OHP) as an internal dose of PAHs exposure, and analyzed the relationship between urinary 1-OHP concentration and PAHs exposure. The study population contained 44 workers in steel-pipe coating and paint manufacture industries. The airborne PAHs was obtained during survey day, and urine were sampled at the end of shift. Personal information on age, body weight, height, eniployment duration, smoking habit, and alcohol consumption was obtained by a structured questionnaire. Airborne PAHs were analyzed by the gas chromatograph with mass selective detector. Urinary 1-OHP levels were analyzed by the high performance liquid chromatograph with ultraviolet wavelength detector. For statistical estimation, t-test, ${\chi}^2$-test, analysis of variance, correlation analysis, arid regression analysis were executed by SPSS/PC (Windows version 10). The mean of environmental total PAHs was $87.8{\pm}7.81{\mu}g/m^3$. The mean concentration ($526.5{\pm}2.85{\mu}g/m^3$) of workers in steel-pipe coating industries using coal tar enamel was the higher than that ($17.5{\pm}3.36{\mu}g/m^3$) of workers in paint manufacture industries using coal tar paint. The mean of urinary 1-OHP concentration ($51.63{\pm}3.144{\mu}\;mol/mol$ creatinine) of workers in steel-pipe coating industries was the higher than that ($2.33{\pm}4.709{\mu}\;mol/mol$ creatinine) of workers in paint manufacture industries. The mean of urinary 1-OHP concentration of smokers was the higher than that of non-smokers. There was significant correlation between the urinary concentration of 1-OHP and the environmental concentration of PAHs (r=O.S48, p<0.001), pyrene(r=0.859, p<0.001), and urinary cotinine (r=0.324, p<0.05). The regression equation between the urinary concentration of 1-OHP in ${\mu}g/g$ creatinine($C_{1-OHP}$) and airborne concentration of PAHs (or pyrene) in ${\mu}g/m^3$ ($C_{PAHs}$ or Cpyrene) is: Log ($C_{1-OHP}$)=-0.650+0.889×Log($C_{PAHs}$), where $R^2=0.694$ and n=38 for p<0.001.Log ($C_{1-OHP}$)=1.087+0.707${\times}$Log(Cpyrene), where $R^2=0.713$ and n=38 for p<0.001. From the results of stepwise multiple regression analysis about 1-OHP, significant independents were total PAHs and urinary cotinine (adjusted $R^2=0.743$, p<0.001). In this study, there were significant correlation between the urinary concentration of 1-OHP and the airborne concentration of PAHs. The urinary 1-OHP was effective index as a biomarker of airborne PAHs in workplace. But it was influenced by non-occupational PAHs source, smoking.

The Results of Radiation Therapy of Limited Stage Small Cell Lung Cancer (국한된 페소세포암의 방사선 치료성적)

  • Kim Sung Hwan;Choi Byung Ok;Gil Hak Joon;Yoon Sei Chul;Bahk Yong Whee;Shinn Kyung Sub;Kim Hoon Kyo;Lee Kyung Sik
    • Radiation Oncology Journal
    • /
    • v.11 no.1
    • /
    • pp.97-102
    • /
    • 1993
  • A retrospective analysis of various characteristics in 32 limited stage small cell lung cancer patients treated at the Department of Therapeutic Radiology in Kangnam St. Mary's Hospital, Catholic University Medical College from April 1983 to September 1991, was carried out to identify factors which had prognostic significance for survival from initiation of radiation therapy. There were 26 men and 6 women. Median age was 63 years (range: 24-78 years). The follow up duration was 1.5 to 44 months (median: 9 months). External radiation therapy was done with daily 160-180 cGy,5 fraction/week, total of 1000-6660 cGy (median: 4500 cGy) to the mediastinum by 6 MV linear accelerator. Of 32 Patients, 27 ($84.4{\%}$) patients were treated with combined modality (chemotherapy plus radiation therapy), and 5 ($15.6{\%}$) patients were treated with radiation therapy only. Complete responders were 12 patients ($37.5{\%}$), partial responders were 11 ($34.4{\%}$), and no responders were 9($28.1{\%}$). Karnofsky performance status over 70 (p<0.04), chemotherapy regimen (CAV, PV, and CAV+PV) (p<0.04),6 or more cycles of chemotherapy (p<0.007), radiation therapy over 4500 cGy (p<0.03), and radiation therapy responder (CR+PR) (p<0.003) showed a significantly favorable influence on 1 year survival rate. Age (p=0.545), sex (p=0.666), presence of superior vena cava syndrome (p=0.719), prophylactic cranial irradiation (p=0.217), and radiation therapy duration (p=0.491) had no effect on survival. Radiation induced side effects were transient esophagitis in 11 ($34{\%}$), general weakness in 9($28{\%}$), gastrointestinal symptoms in terms of nausea, vomiting and indigestion in 5 ($15{\%}$) and leukopenia in 1 ($3{\%}$).

  • PDF

Professionalism raising of the escort which leads an instance analysis (사례분석을 통한 경호 전문성 제고)

  • Yu, Hyung-Chang
    • Korean Security Journal
    • /
    • no.18
    • /
    • pp.73-99
    • /
    • 2009
  • There are three assassination and treatening cases in this thesis introduced as analysis data. They are shooting accidents of the U.S.A's President Reagun (1981,3.30), and the President Park Jeong Hee of South Korea(1974.8.15), assassination of the Prime Minister Lavin of Israel (1995.11.4) In March 30, 1981, there was an accident where criminal, Hinckley, fired ball cartridges right before the President Reagan got into the car to move to White House after completing the announcement of Hilton Hotel of Washington. As a result, the chest of president was shot and public information secretary and safeguard were wounded. In August, 15, pm 10:23, where the 29th 8.15 independent anniversay event was being celebrated by the people at the National theater in Jangchungdong, Seoul, the criminal Moon Sekwang fired ball cartridges, he failed to assassinate the President Park Jeong Hee of Korea, but shot the First lady Yuk Young Soo. She was wounded right part of head and died. In November 4, Saturday, pm 22:00 the Prime Minster Lavin had finished the supporting event of Middle Asia's Peace project and was taking on the car when he was killed by the criminal Amir's shooting, The accidents left very important lesson from the aspect of security analysis and it has been frequently used as a material for the education and training of safeguard organization. In Korea, as well as Presidential Security Service, national security departments have selected it as an important model for the subjects such as 'Security Analysis, 'Security Practice' and 'Security Methodology'. In the performance of security duty, security skill is the most important matter. Moreover, it has a close relationship with politics, society and culture. The purpose of this study is to analyze and reevaluate the case, which has been treated as a usual model from the aspect of security analysis, beyond its introduction. Attempted assassination of President Reagan was evaluated as a positive success example because of its rapid response of adjacent guards to evacuate Reagan, who is a guard target, within 10 seconds after the shot. When comparing it to President Kennedy Assassination of 1963, it was evaluated that guards were significantly specialized. In the study, however, it was possible to found many problems such as carelessness of guard, who is in charge of external area of event place, idle attitude for frequently used event place, confusion of wireless communication, risk of wireless security disclose, insufficient provision of compulsory record file, insufficient profiling of dangerous person and unsecured hospital and first-aid room.

  • PDF

Microwave Irradiation as a Way to Reutilize the Recovered Struvite Slurry and to Enhance System Performance (회수된 MAP 슬러리의 재이용과 공정효율 향상을 위한 도구로서의 극초단파 조사)

  • Cho, Joon-Hee;Lee, Jin-Eui;Ra, Chang-Six
    • Journal of Animal Science and Technology
    • /
    • v.51 no.4
    • /
    • pp.337-342
    • /
    • 2009
  • The feasibility of reutilization of magnesium ammonium phosphate (MAP) or struvite slurry recovered from the process through microwave irradiation was studied in this experiment. For this purpose, 4 different operations were performed with or without Mg source addition and different levels of MAP recycled in a batch reactor. Dissolution rate of MAP, ${NH_4}^+$ elimination pattern and physicochemical changes of MAP during microwave irradiation were also studied. The result showed that only 33% orthophosphate ($PO_4-P$) and 27% $NH_4-N$ removal occurred without adding any external Mg source (run A), whereas 87% $PO_4-P$ and 40% $NH_4-N$ removed when 1.0 M ratio of $MgCl_2$ (run B) was added based on $PO_4-P$ in influent. Although the addition of 1.0 molar ratio of microwave irradiated MAP (Run C) removed lower $PO_4-P$ and $NH_4-N$ than 1.0 M $MgCl_2$ (run B), $PO_4-P$ removal was double when compared with no Mg addition (run A). Addition of half MAP and half $MgCl_2$ (run D) showed the similar removal efficiency (88% $PO_4-P$ and 35% $NH_4-N$) with sole $MgCl_2$ addition (run B). Based on these results, the reutilization of MAP irradiated by microwave would be a feasible way to enhance the removal efficiencies of N and P, as well as curtail the Mg chemical usage. Track study showed that $NH_4-N$ gradually increased at initial stage of microwave irradiation of MAP, and then started eliminating from liquor as temperature increased over $45^{\circ}C$. Dissolution rate of ${PO_4}^{-3}$ during microwave irradiation was proportional to the initial MAP concentration, having $0.0091x^{0.6373}$ mg/sec. It was found from the scanning electron microscope (SEM) study that physical structure of MAP crystal started breaking down into small cube granules within very short time by electromagnetic vibration force during microwave irradiation and then gradually melted down into solution.

A Study on the Moisturizing Effect and Preparation of Liquid Crystal Structures Using Sucrose Distearate Emulsifier (슈크로오스디스테아레이트를 사용한 액정구조의 생성과 보습효과에 관한 연구)

  • Kwak, Myeong-Heon;Kim, In-Young;Lee, Hwan-Myung;Park, Joo-Hoon
    • Journal of the Korean Applied Science and Technology
    • /
    • v.33 no.1
    • /
    • pp.1-12
    • /
    • 2016
  • This study is to make the liquid crystalline structure using sucrose distearate (Sucro-DS) emulsifier to create the hydrophilic type oil-in-water (O/W) emulsion, the droplets of the emulsion having a structure of a multi-lamellar structure. We have studied the physicochemical properties of Sucro-DS using those techniques. And it has been studied in the emulsion performance. In order to form the liquid crystalline structure applying 3 wt% of Sucro-DS, 5 wt% of glycerin, 5 wt% of squalane, 5 wt% of capric/caprylic triglyceride, 3wt% of cetostearyl alcohol, 1wt% of glyceryl mono-stearate, 78 wt% of pure water in mixture having the lamellar structure of stable multi-layer system was found to formed. By applying them, they were described how to create an unstable active material encapsulated cream. Further, the moisturizing cream was studied using this technique. It reported the results to the skin improvement effect by the human clinical trials. The pH range to produce a stable liquid crystal phase using a Sucro-DS was maintained in 5.2~7.5. In order to increase the stability of the liquid crystal, it was when behenyl alcohol containing 3 wt%, the hardness at this time was 13 kg/mm,min. Viscosity of the same amount was 25,000mPas/min. After a test for the effects of the emulsions, the concentration of 6 wt% Sucro-DS is that was appropriate, the particle size of the liquid crystal was 4~6mm. It was observed through a microscope analysis, reliability of the liquid crystal changes for 3 months was found to get stable at each $4^{\circ}C$, $25^{\circ}C$ and $45^{\circ}C$. In clinical trial test, before applying a moisturizing effect it was $13.4{\pm}7%$. Moisturizing cream liquid crystal was not formed in $14.5{\pm}5%$. Therefore, applying than ever before could see the moisture about 8.2% was improved. On the other hand, it was the moisturizing effect of the liquid cream is $19.2{\pm}7%$. The results showed that 43.3% improvement than that previously used. Applications fields, Sucro-DS emulsifier used liquid cream, lotion, eye cream and a variety of formulations can be developed, as well as the cosmetics industry is expected to be wide fields in the application of the external preparation for skin emulsion technology in the pharmaceutical industry and pharmaceutical industry.