• Progress in Superconductivity and Cryogenics
• /
• v.15 no.2
• /
• pp.44-47
• /
• 2013

Large AC loss from the second generation (2G) high temperature superconducting (HTS) wires has been one of the major bottlenecks in power applications with HTS materials. Moreover, the large power applications also require the large current capacity from the HTS wires, which makes them produce larger AC losses. In order to reduce the AC loss from the HTS conductors with large current capacity, an HTS compact cable with some striations on the superconducting layers has been proposed. In this paper, we prepared some sample HTS compact conductors with striations, and measured their magnetization loss from the external magnetic field. We also made some slits on the superconducting layer of the HTS wire by laser cutting to reduce the aspect ratio of the superconducting layers. It would make the low eddy current loss and magnetic decoupling. Finally, the magnetization losses of the sample HTS compact conductors were measured and analyzed.

• Journal of Magnetics
• /
• v.2 no.4
• /
• pp.135-137
• /
• 1997

We report the salient features of the magnetic properties of amorphous TM70Cr5Si10B15(TM=Fe, Co, Ni) alloys. The temperature dependence of magnetization for amorphous ribbons were measured by a SQUID and a VSM from 5 K to 700 K under an external field of 10 kOe. Except TM70Cr5Si10B15 that shows a paramagnetic behaviour, both Fe and Co based amorphous alloys show a typical ferromagnetic thermo-magnetization curves. For these two ferromagnetic alloys, the saturation magnetization in the temperature range from 5 K to about 0.4 Tc can be descrived by the Bloch relation, Ms (T)=Ms(0) [1-BT3/2-CT5/2]. The spin wave stiffness constants and the range of exchange interaction were analyzed from the magnetization behaviour. The variation of the magnetic properties are discussed and compared with the composition of the alloys.

• Journal of Magnetics
• /
• v.8 no.3
• /
• pp.103-107
• /
• 2003

Relaxation of magnon in a very thin ferromagnetic film through spontaneous emission of photon shows an enhancement of the decay rate due to the phase coherence between the magnon and the planar component of wave vector of photon. The coupling between magnon and photon under a strong external magnetic field is considered only at the lowest order one-magnon one-photon process, which we believe the most dominant channel for the radiation from the system. Theoretical understanding related to the geometric confinement is pursued; the phase coherence due to the crystal symmetry in the film plane gives rise to superradiative emission on one hand, but the symmetry breaking along the direction perpendicular to the film renders the possibility of emission itself, providing the increased degrees of freedom for the photon.

• Journal of Magnetics
• /
• v.4 no.3
• /
• pp.102-106
• /
• 1999

Ce exhibits the intermediate valence (IV) state both as an element and in its compounds. In the present review characteristic behavior of the materials showing the IV state are described. Then the methods of producing this state : the application of the external pressure, temperature and magnetic field as well as the alloying are being discussed. An identification of the IV state is frequently not a simple goal and the best results can be obtained using a combination of various independent methods. Particular attention is paid to the X-ray spectroscopy, lattice parameters and the magnetic properties. As the examples of the IV state in the Ce compounds the properties of following materials are reported : CeRhSb, $CeCu_5In_7, CeAg_6In_6, Sc_{1-x}Ce_xFe_4Al_8 $and for comparison Sc1-xYbxFe4Al8.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.948-950
• /
• 2005

This paper compared the test data with the loss when a conductor is exposed to the magnetic fieldof reactors after generating external magnetic field in specimen by means of an air core reactor model and the calculation of loss came from a tying the combination of FEM and integral method. It was applied to the loss measurement of transformers due to leakage flux.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.283-288
• /
• 2013

This paper presents structural topology optimization that is being applied for the design of electromagnetic vibration energy harvester. The design goal is to maximize the root-mean-square value of output voltage generated by external vibration leading structures. To calculate the output voltage, the magnetic field analysis is performed by using the finite element method, and the obtained magnetic flux linkage is interpolated by using Lagrange polynomials. To achieve the design goal, permanent magnet is designed by using topology optimization. The analytical design sensitivity is derived from the adjoint variable method, and the formulated optimization problem is solved through the method of moving asymptotes (MMA). As optimization results, the optimal location and shape of the permanent magnet are provided when the magnetization direction is fixed. In addition, the optimization results including the design of magnetization direction are provided.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.3
• /
• pp.10-13
• /
• 2021

The method of removing micro-plastics from sea water has been developed using electro-magnetic force. Plastics are difficult to decompose and put a great load on the marine environment. Especially a plastic with a size of 5 mm or less is defined as micro-plastic and are carried by ocean currents over long distances, causing global pollution. These are not easily decomposed in the natural environment. The Lorentz force was generated in simulated sea water and its reaction force was applied to the micro-plastic to control their motion. Lorentz force was generated downward and the reaction force to the plastics was upward. The plastic used in the experiment was polystyrene with a diameter of 6 mm, and the density was 1.07 g/cm³. The polystyrene sphere levitated at the current density of 0.83 A/cm² and the external field of 0.87T. The particle trajectory calculation was also made to design separation system using superconducting magnet.

• Journal of the Korean Magnetic Resonance Society
• /
• v.27 no.4
• /
• pp.28-34
• /
• 2023

We study the linear-nonlinear quantum transport theory of Wannier-Landau transition system in the confinement of electrons by a square well confinement potential. We use the projected Liouville equation method with the ensemble density projection technique. We select the dynamic value under a linearly oscillatory external field. We derive the dynamic value formula and the memory factor functions in three electron phonon coupling systems and electron impurity coupling systems of two transition types, the intra-band transitions and inter-band transitions. We obtain results that can be applied directly to numerical analyses. For simple example of application, we analyze the absorption power and line-widths of ZnO, through the numerical calculation of the theoretical result in the Landau system.

• Advances in nano research
• /
• v.5 no.4
• /
• pp.281-301
• /
• 2017

In this disquisition, an exact solution method is developed for analyzing the vibration characteristics of magneto-electro-elastic functionally graded (MEE-FG) beams by considering porosity distribution and various boundary conditions via a four-variable shear deformation refined beam theory for the first time. Magneto-electroelastic properties of porous FG beam are supposed to vary through the thickness direction and are modeled via modified power-law rule which is formulated using the concept of even and uneven porosity distributions. Porosities possibly occurring inside functionally graded materials (FGMs) during fabrication because of technical problem that lead to creation micro-voids in FG materials. So, it is necessary to consider the effect of porosities on the vibration behavior of MEE-FG beam in the present study. The governing differential equations and related boundary conditions of porous MEE-FG beam subjected to physical field are derived by Hamilton's principle based on a four-variable tangential-exponential refined theory which avoids the use of shear correction factor. An analytical solution procedure is used to achieve the natural frequencies of porous-FG beam supposed to magneto-electrical field which satisfies various boundary conditions. A parametric study is led to carry out the effects of material graduation exponent, porosity parameter, external magnetic potential, external electric voltage, slenderness ratio and various boundary conditions on dimensionless frequencies of porous MEE-FG beam. It is concluded that these parameters play noticeable roles on the vibration behavior of MEE-FG beam with porosities. Presented numerical results can be applied as benchmarks for future design of MEE-FG structures with porosity phases.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.31 no.4
• /
• pp.169-190
• /
• 2020

The purpose of this paper is to analyze academic papers published by North Korean scientists, to uncover major areas of research in North Korean science and technology, and to uncover the intellectual structures that underlie these science and technology. Through quantitative analysis, it is to find out who the main research actors are, what research areas are being dealt with, which research areas last a long time, which areas have been discontinued, and which research areas are receiving new attention. In order to detect major research areas and intellectual bases in North Korean science and technology, North Korean scientists' articles were collected from WoS (SCIE). CiteSpace, a scientific quantitative analysis tool, was used to identify major research areas based on author simultaneous citation analysis. The main research areas in North Korea are found to be material properties, vibration analysis, incline matrice, sodium cointercalation, and external magnetic field.