• The Journal of Korean Society for School & Community Health Education
• /
• v.15 no.1
• /
• pp.105-119
• /
• 2014

Objectives: This study investigates the factors influencing values on life-respect among middle school students. Methods: The participants in this study were 126 students from S middle school and Y middle school, both located in Gyeongnam province. The experimental group consisted of 40 students from S middle school, Control group-Iconsisted of 39 students from S middle school, and Control group-II consisted of 47 students from Y middle school. The experimental group was provided with 12 incidences of the life-respect education program from April 1st to June 29th. One period took 45 minutes and proceeded according to a structure of introduction, development, and consolidation. The experimental group received a life-respect education program, Control group-I received health teaching, but Control group-II didn't receive any special education except what was regularly part of their curriculum. The content of the life-respect education program included the following topics: value of life-respect, respect for human life and ethics, life-respect campaign, having a healthy mind, suicide prevention, dealing with crisis, prevention of school violence, abortion and life-respect, social weak minority consideration, death, brain death, euthanasia, life cycle and task, and forest activities. Questionnaires were administered as pre and post-tests which consisted of questions regarding death anxiety, suicide risk, and values on life-respect. The pre and post-tests were analyzed with t-tests, paired t-tests, ANOVAs, and factor analyses using SPSS 18.0. Results: 1. There was a statistically significant increase in the experimental group(p<.0001) and control group-I(p<0.05) in value and attitude about life-respect. On the other hand, it was shown that there was no difference between pre and post-test in control group-II. 2. The result of examining the differences between pre and post-tests after education on values and attitudes toward life-respect using ANCOVA showed, there was a statistically significant difference (p<0.001) among the three groups. Conclusion: the life-respect education program which was conducted over 12 meeting with middle school students had an positive effect, which can be used as basic data for fostering values on life-respect. These findings indicate that the life-respect education program this study used is effective for fostering value of life-respect and decreasing suicide risk.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3367-3378
• /
• 2021

The design phase and safety assessment of Generation IV liquid metal-cooled fast reactors calls for the improvement of fuel pin performance codes, in particular the enhancement of their predictive capabilities towards uranium-plutonium mixed oxide fuels and stainless-steel cladding under irradiation in fast reactor environments. To this end, the current capabilities of fuel performance codes must be critically assessed against experimental data from available irradiation experiments. This work is devoted to the assessment of three European fuel performance codes, namely GERMINAL, MACROS and TRANSURANUS, against the irradiation of two fuel pins selected from the SUPERFACT-1 experimental campaign. The pins are characterized by a low enrichment (~ 2 wt.%) of minor actinides (neptunium and americium) in the fuel, and by plutonium content and cladding material in line with design choices envisaged for liquid metal-cooled Generation IV reactor fuels. The predictions of the codes are compared to several experimental measurements, allowing the identification of the current code capabilities in predicting fuel restructuring, cladding deformation, redistribution of actinides and volatile fission products. The integral assessment against experimental data is complemented by a code-to-code benchmark focused on the evolution of quantities of engineering interest over time. The benchmark analysis points out the differences in the code predictions of fuel central temperature, fuel-cladding gap width, cladding outer radius, pin internal pressure and fission gas release and suggests potential modelling development paths towards an improved description of the fuel pin behaviour in fast reactor irradiation conditions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.170-179
• /
• 2016

In this paper we have tackled the outstanding inventory planning problems over new product launching period in a more holistic manner by addressing first the definition of efficient business rules to effectively control and reduce the inventory risks followed by the rigorous explanations on the implementation guide on suggested inventory planning rules. It is not unusual for many companies in the consumer electronics market to make a great effort to reduce the time to launch a new product because the ability to bring out higher performing products in such a short time period greatly increases the probability for them to remain competitive in the high tech market. Among so many newly developed products, those products with new features and technologies appeal to many potential customers while products which fail to win customers by design and prices rapidly disappear in the market. To adapt to this business environment, those companies have been trying to find the answer to minimize the inventory of old products so they can move to next generation products quickly with less obsolete material. In the experimental implementation of our rule-based inventory planning, Company 'S' reduced the inventory cost for the outgoing products as low as 49% of its peak level of its preceding product version in just 5 month after the adoption of rule-based inventory planning process and system. This paper concluded the subject with a suggestion that the best performance of rule-based inventory planning is guaranteed not from one-time campaign of process improvement along with system development but the decision maker's continuing support and attention even without seeing any upcoming business crisis.

• Korean Journal of Occupational Health Nursing
• /
• v.20 no.2
• /
• pp.113-118
• /
• 2011

Purpose: The purpose of this study was to examine effects of smoking cessation program in large size company using motivational enhancement counseling. Methods: A quasi-experimental design was conducted. 72 workers in intervention group and 65 workers in control group participated in 7 large size companies. Smoking cessation program consisted of a campaign, smoking cessation education, and 6 weeks motivational enhancement counseling. The motivational enhancement counseling was tailored to the individual's stage of change. Stages of smoking behavior, smoking cessation rate, nicotine dependence, and confidence of smoking cessation were assessed after intervention. Results: The results showed that intervention had a significant impact on improving stages of smoking behavior and smoking cessation rate, and impact on decreasing nicotine dependence, compared to those of a control group. Conclusion: The effects and feasibility of smoking cessation program including motivational enhancement counseling were revealed in the large size company. These results might provide information that can be used in improving cultures of smoking cessation for workers.

• Earthquakes and Structures
• /
• v.17 no.6
• /
• pp.611-621
• /
• 2019

Precast concrete structure has many advantages, but the assembled seam will affect potentially the overall seismic performance of structure. Based on the sidewall joint located in the bottom of assembled monolithic subway station, the main objectives of this study are, on one hand to present an experimental campaign on the seismic behavior of precast sidewall joint (PWJ) and cast-in-place sidewall joint (CWJ) subjected to low-cycle repeated loading, and on the other hand to explore the effect of shape and position of assembled seam on load carrying capacity and crack width of precast sidewall joint. Two full-scale specimens were designed and tested. The important index of failure pattern, loading carrying capacity, deformation performance and crack width were evaluated and compared. Based on the test results, a series of different height and variably-shape of assembled seam of precast sidewall joint were considered. The test and numerical investigations indicate that, (1) the carrying capacity and deformation capacity of precast sidewall and cast-in-place sidewall were very similar, but the crack failure pattern, bending deformation and shearing deformation in the plastic hinge zone were different obviously; (2) the influence of the assembled seam should be considered when precast underground structures located in the aquifer water-bearing stratum; (3) the optimal assembled seam shape and position can be suggested for the design of precast underground concrete structures according to the analysis results.

• Biomolecules & Therapeutics
• /
• v.28 no.4
• /
• pp.311-319
• /
• 2020

Middle East Respiratory Syndrome Coronavirus (MERS-CoV) is a newly emerging viral disease with fatal outcomes. However, no MERS-CoV-specific treatment is commercially available. Given the absence of previous structure-based drug discovery studies targeting MERS-CoV fusion proteins, this set of compounds is considered the first generation of MERS-CoV small molecule fusion inhibitors. After a virtual screening campaign of 1.56 million compounds followed by cell-cell fusion assay and MERS-CoV plaques inhibition assay, three new compounds were identified. Compound numbers 22, 73, and 74 showed IC₅₀ values of 12.6, 21.8, and 11.12 µM, respectively, and were most effective at the onset of spike-receptor interactions. The compounds exhibited safe profiles against Human embryonic kidney cells 293 at a concentration of 20 µM with no observed toxicity in Vero cells at 10 µM. The experimental results are accompanied with predicted favorable pharmacokinetic descriptors and drug-likeness parameters. In conclusion, this study provides the first generation of MERS-CoV fusion inhibitors with potencies in the low micromolar range.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.19-28
• /
• 2005

We establish a statistical model for the ultra-wide bandwidth (UMB) indoor channel based on over 2000 frequency response measurements campaign in a Practical apartment. The approach is based on the investigation of the statistical properties of the multipath profiles measured in different place with different rooms. Based on the experimental results, a characterization of the propagation channel from theoretic view point is described. Also we describe a method for measurement of the channel impulse response and channel transfer function. Using the measured data, the authors compares channel impulse responses obtained from time-domain and channel transfer functions obtained from frequency-domain with statistical path loss model. The bandwidth of the signal used in this experiment is from 10MHz to 8.01 GHz. The time-domain results such as maximum excess delay, men excess delay and ms delay spread are presented. As well as, omni-directional biconical antenna were used for transmitter and receiver In addition, measurements presented here support m channel model including the antenna characteristics.

• Smart Structures and Systems
• /
• v.25 no.1
• /
• pp.111-122
• /
• 2020

Researchers up to date have introduced several Structural Health Monitoring (SHM) techniques with varying advantages and drawbacks for each. Satellite positioning systems (GPS, GLONASS and GALILEO) based techniques proved to be promising, especially for high natural period structures. Particularly, the GPS has proved sufficient performance and reasonable accuracy in tracking real time dynamic displacements of flexible structures independent of atmospheric conditions, temperature variations and visibility of the monitored object. Tall structures are particularly sensitive to oscillations produced by different sources of dynamic actions; such as typhoons. Wind forces induce in the structure both longitudinal and perpendicular displacements with respect to the wind direction, resulting in torsional effects, which are usually more complex to be detected. To efficiently track the horizontal rotations of the in-plane sections of such flexible structures, two main issues have to be considered: a suitable sensor topology (i.e., location, installation, and combination of sensors), and the methodology used to process the data recorded by sensors. This paper reports the contributions of the measurements recorded from dual frequency GPS receivers and uni-axial accelerometers in a full-scale experimental campaign. The Canton tower in Guangzhou-China is the case study of this research, which is instrumented with a long-term structural health monitoring system deploying both accelerometers and GPS receivers. The elaboration of combining the obtained rather long records provided by these two types of sensors in detecting the torsional behavior of the tower under ambient vibration condition and during strong wind events is discussed in this paper. Results confirmed the reliability of GPS receivers in obtaining the dynamic characteristics of the system, and its ability to capture the torsional response of the tower when used alone or when they are combined with accelerometers integrated data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.32-39
• /
• 2011

Even if the traffic light is green, if vehicles enter a jammed intersection, they are violation of the law. The police is enforcing law as a part of a nation wide campaign. Because, using the camcorder, the police can not do enforcement the offending vehicle, there are other techniques. Our research group proposed automated photographic equipment enable to enforce moving violation in intersection. Using new license plate recognition technology and backtracking technology to trace the offending vehicle, once the system detects a violator, it records 8 wide pictures and 1picture from the front vehicle, showing it enter and proceed through the intersection. Field experimental results obtained in the system, the following conclusions. The three measures of effectiveness investigated were recognition rate 83.5, mis-match recognition rate 1.5%.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.1
• /
• pp.97-103
• /
• 2004

In case of a fire in road or railway tunnel it is always necessary to keep the escape condition as good as possible. Most of the victims of major fires in tunnels are because they couldn't leave the tunnel in time and were trapped by smoke, or rescue teams couldn't reach the place of the accident due to low visibility and high temperature. In spring 2003 a comprehensive field experiment was undertaken in a large scaled tunnel in Youngin City to test the effectiveness of a new water spray curtain system, designed to the air qualify inside of a tunnel in case of fire during passenger's escape to safe routes, In order to control the smoke propagation, fixed water sprayed nozzles were used to make water curtain system, which can be installed or hanging water piping line below ceiling. The experiment was accompanied by an extensive measurement campaign in order to measure temperature dropping effect and flow conditions as well as CO concentration for various water sprayed curtains produced by sprinkler heads or water spray nozzle. Eventually comparison analysis were undertaken to investigate the performance of water curtains under fixed water pressure. Therefore most effective water curtain system was presented on the basis of water droplet size in long tunnel.