• Advances in materials Research
• /
• v.13 no.5
• /
• pp.355-374
• /
• 2024

Several mathematical models describe the compressive behaviour of different types of concretes, but no specific one for foamed cellular concrete (FCC) has been developed. In this work, simple compression tests on FCC specimens of different mixes were conducted to study this material's compression behaviour curve until failure. Using continuous load and displacement measurement equipment, it was possible to obtain stress-strain curves up to peak for FCC of different strengths (from 1.20 to 47.34 MPa). Elastic modulus, compressive strength and failure strain values were also determined. Through the analysis of the mentioned curves, a mathematical model of them was obtained, through which it is possible to describe the compression behaviour of FCC up to failure. The comparison between the predicted curve against experimental data shows the effectiveness of the proposed model.

• Earthquakes and Structures
• /
• v.9 no.3
• /
• pp.541-562
• /
• 2015

This paper aims at developing the knowledge on the seismic behavior of dowel beam-to-column connections, typically employed in precast buildings in Europe. Despite the large diffusion of the industrial buildings, a high seismic vulnerability was exhibited by these structures, mostly due to the connection systems deficiencies, during some recent earthquakes (Emilia 2012, Turkey 2011). An experimental campaign was conducted on a typical dowel connection between an external column and a roof beam. In this paper, the performed cyclic shear test is described. According to the experimental results, the seismic response of the system is evaluated in terms of strength, stiffness and failure mechanism. Moreover, the complete damage pattern of the test is described by means of the instrumentations records. The connection failure occurred due to the concrete cover failure in the column (splitting failure). Such a mechanism corresponds to a negligible energy dissipation capacity of the connection, compared to the overall seismic response of the structure. The experimental results are also compared with the results of a similar monotonic shear test, as well as with some literature relationships for predicting the strength of dowel connections under horizontal (seismic) loads.

• Structural Engineering and Mechanics
• /
• v.53 no.2
• /
• pp.189-204
• /
• 2015

After the large destruction of Lisbon due to the 1755 earthquake, the city had to be almost completely rebuilt. In this context, an innovative structural solution was implemented in new buildings, comprising internal timber framed walls which, together with the floors timber elements, constituted a 3-D framing system, known as "cage", providing resistance and deformation capacity for seismic loading. The internal timber framed masonry walls, in elevated floors, are constituted by a timber frame with vertical and horizontal elements, braced with diagonal elements, known as Saint Andrew's crosses, with masonry infill. This paper describes an experimental campaign to assess the in-plane cyclic behaviour of those so called "frontal" walls. A total series of 4 tests were conducted in 4 real size walls. Two models consist of the simple timber frames without masonry infill, and the other two specimens have identical timber frames but present masonry infill. Experimental characterization of the in-plane behaviour was carried out by static cyclic shear testing with controlled displacements. The loading protocol used was the CUREE for ordinary ground motions. The hysteretic behaviour main parameters of such walls subjected to cyclic loading were computed namely the initial stiffness, ductility and energy dissipation capacity.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1129-1143
• /
• 2009

This paper proposes a recommendation system (Association Rule System for Targeting) which considers target which is not considered by previous Logistic Regression system, and proves that the efficiency of the recommendation system is better than that of the current and previous Apriori algorithm system. Also this study shows that the click and purchasing rate of the proposed Association Rule System for Targeting is much higher than those of current Apriori algorithm system after the purchasing campaign even though the open rate of the former is lower than that of the latter. In comparison with Logistic Regression methodology, this paper proves with experimental data that the purchasing effect of the proposed system for specific items is much higher in accuracy than that of current Apriori algorithm system even though the purchasing rate of current Apriori algorithm system is higher in whole shopping malls than that of the proposed Association Rule System for Targeting.

• Quality Improvement in Health Care
• /
• v.19 no.1
• /
• pp.30-42
• /
• 2013

Objectives: This study was intended to check if the "Creating Clean Wards" project, which is an innovative reinforced campaign activity targeting infection control strategies and active surveillance cultures for VRE (vancomycin resistant enterococci) high-risk patients to be admitted in the NS (neuro-surgery) wards, would be reduced the incidence rates of VRE acquisition, transmission rates. Methods: 75 subjects of the VRE high-risk patients were surveyed by carrying out active surveillance cultures of VRE colonization 11 times from January to March, 2012. And the retrospective study was conducted dividing them into two groups. Results: The incidence rates of VRE acquisition was reduced to 3.67 cases per 1,000 patients day in the control group and to 2.88 cases in experimental group, which was not statistically significant (p = .753). VRE transmission rates of 0.0015 per day before the project tended to increase to 0.0019, although not statistically significant (p = .650). As a result of multivariate analysis with regard to using glycopeptide antibiotics in order to find out risk factors of VRE colonization, the patients who had been treated with glycopeptide until VRE colonization showed 274.41 times higher rate. Conclusion : For effective VRE infection control in NS wards, We should carry out active surveillance culture regularly, especially patient of using glycopeptide. And block the spread of VRE by strengthening infection control through the strict isolation and the changed mind-set of members motivated by the "Creating Clean Wards" campaign.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.25-34
• /
• 2014

The current study investigates the impacts of empathic concern, as a personal trait, and rational/emotional appeal on responses over the campaigns to help the disabled. Empathic concern is an emotional personality known as strongly activating altruistic motivations. The experiment proceeded at two stages that in the first stage, the personal disposition was measured and in the second stage, the condition of appeal type was presented. Thus, the whole experimental design was empathic concern(2) ${\times}$ appeal type(2) on attitudes and behavioral intention. Individuals high in empathic concern showed higher ratings, compared to people low, on attitudes and behavioral intention in the condition of rational appeal. The difference between high and low empathic concern in the condition of emotional appeal was small.

• Korean journal of communication and information
• /
• v.44
• /
• pp.223-247
• /
• 2008

The purpose of this study is to explore the anti-smoking message effects and smoking status on smoking belief attributes. Based on the health behavior theories such as theory of reasoned action, health belief model, and social cognitive theory, three factors are selected to investigate the effects of anti-smoking campaign messages. The balance of benefits and barriers, self-efficacy, and social pressure are selected as independent variables. Three two-way ANOVA were conducted. Results showed that the main effect of social pressure were found with the social smoking attributes. Interaction effects were found on the nonsmoker-social pressure group and the non-smoker-two sided message group. It is found that nonsmokers accepted these two anti-smoking messages easily as compared to smoker groups. No main smoking status was found in this study; it is believed that smoking is a habitual that is not changed easily because attitude formation takes time. Results revealed that the two-sided message video releases and the social pressure video releases were favored by both smokers and nonsmokers. This study contributes the theoretical framework that can be transferred to the practices of anti-smoking campaign. Also, the researcher produced the televised stimuli which is not common in health message studies. By using the televised message material, the research tried to solve the validity problem which is common in experimental design.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.137-150
• /
• 2019

In this study, we investigated the joint effects of message framing (profit vs. loss) and source type (celeb vs. general) on the persuasive effectiveness of mass media campaign to prevent drunk driving. As a result of conducting an experimental study on 218 motorcycle drivers in Vietnam, the main effects of message framing were not significant, but the interaction effect with the type of information source consistently influenced the attitude toward the advertisement, the drunk driving prevention, and the behavior intention Specifically, it is more persuasive to send a message by a general model rather than an celebrity when the loss framing method is used while it is more persuasive to send a message by a celebrity model than a general model when the gain framing is used. This study therefore provided valuable information and practical implication to the National Traffic Safety Committee of Vietnam for establishing a campaign to prevent drunk driving. In addition, this research also has valuable theoretical implication because it examines the effect of drunk driving prevention campaign on the attitude toward not only advertisement and the drunk driving prevention but also the behavior intention.

• Journal of Korea Multimedia Society
• /
• v.21 no.2
• /
• pp.281-288
• /
• 2018

Crowdfunding has seen an enormous rise, becoming a new alternative funding source for emerging startup companies in recent years. Despite the huge success of crowdfunding, it has been reported that only around 40% of crowdfunding campaigns successfully raise the desired goal amount. The purpose of this study is to investigate key factors influencing successful fundraising on crowdfunding platforms. To this end, we mainly focus on contents of project campaigns, particularly their linguistic cues as well as multiple features extracted from project information and multimedia contents. We reveal which of these features are useful for predicting success of crowdfunding campaigns, and then build a predictive model based on those selected features. Our experimental results demonstrate that the built model predicts the success or failure of a crowdfunding campaign with 86.15% accuracy.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1005-1030
• /
• 2014

The need for assessing dynamic response of typical industrial piping systems subjected to seismic loading motivated the authors to apply model reduction techniques to experimental dynamic substructuring. Initially, a better insight into the dynamic response of the emulated system was provided by means of the principal component analysis. The clear understanding of reduction basis requirements paved the way for the implementation of a number of model reduction techniques aimed at extending the applicability range of the hybrid testing technique beyond its traditional scope. Therefore, several hybrid simulations were performed on a typical full-scale industrial piping system endowed with a number of critical components, like elbows, Tee joints and bolted flange joints, ranging from operational to collapse limit states. Then, the favourable performance of the L-Stable Real-Time compatible time integrator and an effective delay compensation method were also checked throughout the testing campaign. Finally, several aspects of the piping performance were commented and conclusions drawn.