• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.57-67
• /
• 2009

Along with the advanced construction technologies, the maximum size of coarse aggregate used for dam construction ranges from several cm to 1m. Testing the original gradation samples is not only expensive but also causes many technical difficulties. Generally, indoor tests are performed on the samples with the parallel grading method after which the results are applied to the design and interpretation of the actual geotechnical structure. In order to anticipate the exact behavior characteristics for the geotechnical structure, it is necessary to understand the changes in the shear behavior. In this study, the Large Triaxial Test was performed on the parallel grading method samples that were restructured with river bed sand-gravel, with a different maximum size, which is the material that was used to construct Dam B in Korea. And the Stress - Strain characteristics of the parallel grading method samples and the characteristics of the shear strength were compared and analyzed. In the test results, the coarse-grained showed strain softening and expansion behavior of the volume, which became more obvious as the maximum size increased. The internal angle of friction and the shear strength appeared to increase as the maximum size of the parallel grading method sample increased.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1295-1295
• /
• 2024

As extreme weather events such as heavy snowfall and typhoon become more frequent, climate change significantly impacts across various worldwide industries. With demands for dealing with this phenomenon, continuous achievements in safety diagnosis have been announced for large structures. Conversely, in agricultural infrastructures having lower risk to human life, there is lack of established safety diagnosis methods. However, considering expansion of high-value smart farm, the importance of plastic greenhouse cannot be overlooked. Therefore, this study aimed to develop on-site diagnosis technique for structural safety of steel structure greenhouse. To build an analysis model, we generated point cloud data of on-site greenhouse using a camera with LiDAR sensor. Subsequently, we extracted points corresponding to pipes using a pre-trained semantic segmentation model, achieving a pipe segmentation accuracy of 78.1%. These points were then converted into 3D frame model, with a location coordinate error of 5.4 cm for nine reference points, as measured by an on-site survey. In FEM structural analysis, nonlinearity of pipe connection was reflected. The loads were determined based on expected wind speed and snow depth in Korea. The structural safety of on-site model was diagnosed more vulnerable with 10.3% higher maximum axial stress, compared with standard model. Through this research, we expect the quantitative safety diagnosis of predicting greenhouse collapse risk. In addition, this technique will enable localized reinforcement strategies within the structure.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.39-46
• /
• 2021

The quantitative measurement of interfacial adhesion energy (Gc) of multilayer thin films for Cu interconnects was investigated using a double cantilever beam (DCB) and 4-point bending (4-PB) test. In the case of a sample with Ta diffusion barrier applied, all Gc values measured by the DCB and 4-PB tests were higher than 5 J/㎡, which is the minimum criterion for Cu/low-k integration without delamination. However, in the case of the Ta/Cu sample, measured Gc value of the DCB test was lower than 5 J/㎡. All Gc values measured by the 4-PB test were higher than those of the DCB test. Measured Gc values increase with increasing phase angle, that is, 4-PB test higher than DCB test due to increasing plastic energy dissipation and roughness-related shielding effects, which matches well interfacial fracture mechanics theory. As a result of the 4-PB test, Ta/Cu and Cu/Ta interfaces measured Gc values were higher than 5 J/㎡, suggesting that Ta is considered to be applicable as a diffusion barrier and a capping layer for Cu interconnects. The 4-PB test method is recommended for quantitative adhesion energy measurement of the Cu interconnect interface because the thermal stress due to the difference in coefficient of thermal expansion and the delamination due to chemical mechanical polishing have a large effect of the mixing mode including shear stress.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.515-527
• /
• 2014

This study conducted experiment for understanding engineering characteristics of domestic sands by examining standard sand and sand from Yokji Island and Nakdong River in terms of confining pressure, $K_0$, over consolidation and relative density factors through triaxial compression test. The test showed that deviator stress by strain positively changed as confining pressure and relative density grow while $K_0$ and over consolidation factors do not directly correlated with it. Angle of internal friction decreases as confining pressure increases which strengthens contact force between particles, and declines as relative density drops, whereas $K_0$ and over consolidation factors hardly affect the results. When it comes to volumetric strain, volume expansion decreases as confining pressure increase due to crushability and rearrangement of particles while $K_0$ and over consolidation shows same movement unconditionally, and relative density appears compressed as it grows at the beginning however it expands as axial strain increases. Modulus of elasticity ($E_{sec}$) by strain has tendency into convergence resulting in initial secant modulus of elasticity ($E_{ini}$) > secant modulus of elasticity($E_{sec}$) > tangent modulus of elasticity ($E_{tan}$). On the other hand, it grows as confining pressure and relative density increase while indicating similar modulus of elasticity ($E_{sec}$) regarding on $K_0$ and over consolidation. Slope of critical line (M) tended to decrease as confining pressure increases, follow same line according to $K_0$, confining pressure and relative density, and increase as relative density grows.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.1
• /
• pp.17-29
• /
• 2014

GRAS probiotics can be used to modulate intestinal microbiota and to alleviate various gastrointestinal disorders. In several recent studies, researchers have explored the potential expansion and usability of probiotics to reduce the risk factors associated with diseases, including obesity, hypercholesterolemia, arterial hypertension, hyperhomocysteinemia, and oxidative stress. In this review, our aim was to clarify the mechanism underlying interactions between hosts (animal or human) and probiotics and the beneficial effects of probiotics on human health.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.382-393
• /
• 2020

The engineered barrier system of high-level radioactive waste disposal must maintain its performance in the long term, because it must play a role in slowing the rate of leakage to the surrounding rock mass even if a radionuclide leak occurs from the canister. In particular, it is very important to clarify gas dilation flow phenomenon clearly, that occurs only in a medium containing a large amount of clay material such as a bentonite buffer, which can affect the long-term performance of the bentonite buffer. Accordingly, DECOVALEX-2019 Task A was conducted to identify the hydraulic-mechanical mechanism for the dilation flow, and to develop and verify a new numerical analysis technique for quantitative evaluation of gas migration phenomena. In this study, based on the conventional two-phase flow and mechanical behavior with effective stresses in the porous medium, the hydraulic-mechanical model was developed considering the concept of damage to simulate the formation of micro-cracks and expansion of the medium and the corresponding change in the hydraulic properties. Model verification and validation were conducted through comparison with the results of 1D and 3D gas injection tests. As a result of the numerical analysis, it was possible to model the sudden increase in pore water pressure, stress, gas inflow and outflow rate due to the dilation flow induced by gas pressure, however, the influence of the hydraulic-mechanical interaction was underestimated. Nevertheless, this study can provide a preliminary model for the dilation flow and a basis for developing an advanced model. It is believed that it can be used not only for analyzing data from laboratory and field tests, but also for long-term performance evaluation of the high-level radioactive waste disposal system.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.97-114
• /
• 2013

The 6th Worldwide Air Transport Conference was held in Montreal in March 2013 under the auspices of ICAO. This conference, which has been held every ten years, is dealing with virtually every issue of international air transport, and aiming at updating ICAO policy in order to ensure long-term growth of international civil aviation. Last conference which took place in 2003 focused on the liberalization of air transport, and the 6th conference shifted its focus from whether to push for liberalization, to how to implement it. The main agenda items for the 6th conference was liberalization, safeguards, ownership, fair competition, airports and air navigation facilities, charges, and ICAO policy. The liberalization, and in particular progressive liberalization has been a main theme over the past decades. In the process leading to liberalization, there needs to be the expansion of market access, easing regulation on ownership and control of airlines. Furthermore, the provision of enough infrastructure such as airport and air navigation facilities may be contributing factor to remove impediments to liberalization. However, out of concern as for undermining interests of consumer and the weak, when liberalization is proceeding in a sudden and radical manner, there should be safeguards so as to ensure market participation by developing countries, consumer protection, and economical and transparent decision on taxes and charges. Fair competition which differs from promoting competition in the market, is a policy in order to protect the weak players and consumers from monopoly and oligopoly. The Korean delegation submitted 3 WPs (WP/85, 86 and 87) and 1 IP, and presented WPs, at the conference, which were a lot compared with previous occasions. A paradigm shift was emphasized to expedite the process of liberalization at the 6th conference. The reality is that with many previous recommendations to stress the importance of liberalization, and to urge States to change their attitudes, the pace of the liberalization has been very slow and staggering. The liberalization of air transport will contribute to the growth of air transport and related industry, to create new employment, promoting tourism and regional development, and further to facilitating mutual understanding and exchange, which will also lead to making a barrier-free world. In this context, it is expected that the next conference will also evaluate the on-going process of liberalization.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.442-447
• /
• 1994

Effect of different mixing ratio of non-glutinous and glutinous rice on physical and rheological properties of extrudate prepared in a single screw extruder were examined. The extrusion conditions in term of screw speeds, moisture content and die temperature were 258 rpm, 18% and $120^{\circ}C$, respectively. The resisdence time distribution of the most of materials were within 30 second and small portion of them went up to 80 second. The expansion ratio was the highest value (2.93) for 70% of glutinous rice in the mixture, while the lowest value for 100% of non-glutinous rice. Breaking strength was in the range between 1,051g and 1,117g for $10{\sim}20%$ of glutinous rice in the mixture, while the lowest value (737g) for 80%r of glutinous rice. As the amount of glutinous rice increased, L and a values were increased and b value was decreased. The uncooked cold paste viscosity had 400 B.U. for 100% non-glutinous rice , while no peak for the 100% glutinous rice. As the amount of glutinous rice increased up to 100%, the water absorption index (WAI) was decreased, while water solubility index (WSI) was increased. The rheological properties of extrudate were accounted by the law of Oswald. The flow behavior index of extrudate was less than 1.0, which showed pseudoplastic behavior. Yield stress was the highest value for 20% of glutinous rice in the mixture and the lowest value for $80{\sim}100%$ of glutinous; rice. Number of air cell was between 128 and 159 for $80{\sim}100%$ of glutinous rice in the mixture, while $81{\sim}84%$ for $0{\sim}20%$ of glutinous rice. The degree of shapefact was increased more when the mixtures of glutinous and non-glutinous rice was used than when glutinous or non-glutinous rice was only used.

• The Journal of Pediatrics of Korean Medicine
• /
• v.32 no.1
• /
• pp.83-91
• /
• 2018

Objectives This study aims to build the baseline data for promoting school health care program by identifying satisfaction level and improvement point through the satisfaction survey after Korean medicine doctor's student health and wellness program in 2016. Methods An association of Korean medicine doctor in Seongnam city conducted Korean medicine doctor's student health and wellness program for 12 middle schools, 6 high schools and 1 special-need school in Seongnam city in 2016. The participating Korean medicine doctor visited each school for 8 times and conducted health consultations, health education classes and Korean medicine treatment for the school students and the school employees. Teachers and administrators from the participating schools answered the self-reported satisfaction questionnaires and the results were analyzed by SPSS 22.0. Results 35 people responded the program satisfaction questionnaires, the overall satisfaction average was $9.40{\pm}0.88$ (out of 10). In the course of the program, satisfaction average regarding the student's health check-ups was $9.05{\pm}0.88$, satisfaction average regarding the informatory brochures for the parents was $9.08{\pm}1.09$, satisfaction average regarding the participation enrollment process was $9.06{\pm}1.16$, and the satisfaction average regarding the questionnaire statistics and the result reports was $8.86{\pm}1.93$. The satisfaction average of the program was as follows: health consultation ($9.20{\pm}1.08$), treatment ($9.31{\pm}0.90$), and health education classes ($8.78{\pm}1.68$). Some of the good things about program were 'Telling students about their physical condition' (57.1%), 'Curing the sick student quickly' (48.6%), 'Providing students with useful information about the health' (48.6%), 'Teaching students how to manage their health and how to manage symptoms' (42.9%). Average satisfaction about sustainability and needs of the program was $9.15{\pm}0.91$, and the participant teachers wanted to learn more about how to manage internet addiction (22.9%), stress (45.7%), atopy (28.6%), neck pain (42.9%), allergic rhinitis (37.1%), and low back pain (34.3%) from the future wellness programs. Conclusions Student health care is one of the most important issue in national health policies. We have designed a bridge model that a local community, school, and doctors can work together to develop. After the implementation of the program, the results of the satisfaction survey showed a very high satisfaction level. This study can be the basis for further improvement of the bridge program as well as the expansion of the program in other settings.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.3
• /
• pp.97-110
• /
• 2012

This study aimed at considering the original shape of Iljiam Tea Garden at Mt. Daedun. In order to accomplish our goal, we tried to strengthen the authenticity of construction of Iljiam by comparing its space structure depicted in the poetry of Choeui(艸衣) the monk with its current restored state. According to the clues and situation in the poetry along with symbolic words like 'Choeui' and 'Ilji(一枝)', Iljiam seemed to be a tea garden with elegant and celestial beauties, and with a nice view where Choeui the famous monk searched for the highest state of enlightenment by enjoying and living in nature. When we compared the plural aspects of Iljiam like Dacheon(茶泉), Dajo, Mulhwak, Darim(茶林), Chaewon(菜園), and Yeonji(蓮池) with those of Dasan Tea Garden[茶山草堂], we could see that the basic components of tea-culture space of both gardens are the same, showing the organizational principle of the top and bottom area to stress reading and studying. When it is restored, the authenticity of Iljiam should be pursued by linking spatial, historical, and landscaping characteristics as the space of which Choeui the monk carried out Zen meditation and mastered tea. However, the recent grand scale Buddhist business like the expansion of access road and construction of Buddhist sanctuary and Seolimdang became the biggest threat to the authenticity. Especially, it was emphasized many times in various poetry that the view from Iljiam and its surroundings is extraordinary, so it is critical to get rid of obstacles to the view from Iljiam and its surroundings in order to restore Iljiam as its genuine form. The current Iljiam should be re-made because it is like a leaf-roofed garden, not like a hermitage. However, the opinion that Jawoohongryeon-sa(紫芋紅蓮社) is somewhat a Taoistic and Taoist hermit space with a special shape adopted the pattern of building of the Joseon period rather than a Buddhist building can be accepted as long as other convincing historical evidences are found out, considering the ideology of uniting Confucianism and Buddhism and the spirit of Taoist hermit found out from poetry of Choeui and his friends. In conclusion, the restoration of Iljiam in 1979 was carried out to restore the place of Iljiam rather than to restore the originality of Iljiam by combining and referring domestic cases of tea gardens. However, there is not much material for restoration even though the main frame of Iljiam was distorted. Nevertheless, the top and bottom ponds should be constructed as a rectangle shape. In addition, it can be improved much in terms of plants and trees. It is necessary to restore bamboo forest, which was razed in order to make a tea plantation around Seolimdang, to set vines of arbors above the upper limbs, to plant pine trees and willow trees inside of the garden, and to put Dajeolgu under the corner of the eaves. Especially, the bamboo forest emphasized in poetry and took care of by Choeui himself should be restored inside of the garden.