• 제목/요약/키워드: exothermic property

검색결과 29건 처리시간 0.023초

EFFECT OF ADDED Si ON DENSIFICATION OF Ni-AI INTERMETALLIC COATING ON SPHEROIDAL GRAPHITE CAST IRON SUBSTRATES

  • Kim, Tetsuro ata;Keisuke Uenishi;Akira Ikenaga;Kojiro F. Kobayashi
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
    • /
    • pp.726-731
    • /
    • 2002
  • Reaction synthesis is a process to form ceramics, intermetallics and their composites from elemental powder mixture. Application of this process to a surface modification techniques has a possibilities to enable the process at a lower temperature or for a shorter time, although synthesized materials are likely to include voids and unreacted elements. This paper intend to examine the effect of Si addition to the mixture of Al and Ni on the densification of synthesized Ni-Al intermetallic compounds and to evaluate the surface properties of obtained coatings. By the Si addition, exothermic reaction temperature to form Ni-Al intermetallic was lowered to be below the melting point of Al. Si soluted $Al_3$Ni$_2$, $Al_3$Ni and $Al_{6}$Ni$_3$Si were mainly formed in the coating layer when powder mixture was heated to 973K for 300s. Besides, densification was enhanced by increasing hot press pressure, Si additions and heating rate. When the composition of eutectic Al-Si reaches 78%, void ratio of sintered compact reduced to 0.4%. It is caused by higher flowability of Al-Si liquid phase generated and its infiltration into the void. Since the hardness of NiAl(Si) compound (about 600HV) formed in the coating layer is higher than that of Ni-Al compound (about 400HV), coating layer with high density and superior wear property is obtained by hot press using reaction synthesis from Al-Ni-Si powder mixture.

  • PDF

DGEBF/선형아민 계에서의 경화제 주쇄에 포함된 에틸기에 결합된 질소원자 개수에 따른 물성변화 연구 (Property Changes due to Numbers of Nitrogen Atom Bonded at Ethyl Group, Included in Main Chain of Curing Agents of DGEBGF/Linear Amino Systems)

  • 명인호;이재락
    • Composites Research
    • /
    • 제17권6호
    • /
    • pp.44-51
    • /
    • 2004
  • 에폭시 경화계에서 말단 관능기가 같은 선형아민 경화제의 주쇄에 포함된 에틸기에 결합된 질소원자 개수가 반응특성 및 열적, 기계적특성에 미치는 영향을 알아보기 위하여, 빈용 에폭시수지인 DCEBF (diglycidyl ether of bisphenol F)를 DETA (diethylenetriamine), TETA (triethylenetetraamine) 그리고 TEPA (tetraethylenepentaamine)와 1:1 당량비로 경화하였다. 이 연구에서 DGEBF/아민계에서 경화제 주쇄의 질소원자 거수에 의하여 반응특성 및 열적성질, 기계적특성에 중대하게 영향을 미쳤다. 즉, 주쇄의 질소원자 개수가 작을수록 반응열이 많고 최대발열온도가 낮아졌다. 경화물의 경우 밀도와 최대반응전환률은 주쇄의 질소원자 개수와는 큰 관계가 없으나, 굴곡탄성률과 인장탄성률은 주쇄의 질소원자 개수가 작을 수록 크다. 그 외의 열안정성, 부피수축률(%), 유리전이온도, 인장강도, 굴곡강도는 주쇄의 질소원자 개수와는 일견 무관한 불규칙한 경향을 보인다. 이는 최대반응전환률(%)의 차이가 이러한 특성에 영향을 미치는 것을 나타낸다.

보온 기능성 거들에 대한 호감도 및 수용도 비교 조사 (A Comparative Study of Preference and Possibility to Acceptance about Functional Warmth Smart Clothing)

  • 황영미;이정란
    • 한국의류산업학회지
    • /
    • 제10권6호
    • /
    • pp.1006-1013
    • /
    • 2008
  • This study is basic material for development of a smart girdle. Through the intentionally sampling of 313 consumers from teenagers to the forties who have experienced wearing girdles, lifestyles on consumer's age, attitude to health, favor of warm functional girdle, and possibility to acceptance were surveyed and analyzed by questionnaire. The result of the study are summarized as followed. 1. Analysis about lifestyle with warmth and attitude to health showed that subjects in their thirties and forties have higher than teenagers and the twenties in frequency of distribution. This means people are tend to have more attention to warmth and health as they grow older. 2. In result about analysis of characteristic of wearing girdle, subjects were prefer girdle made of cotton which have superior permeability and hygroscopic property. The reason that wearing girdle is to complement of weak points of body somatotype in the thirties and forties and feel the stability during menstrual period in the twenties and teenagers. The time zone of putting on girdle is mainly winter while one is out wearing one-piece or skirt. 3. When surveyed about the preference to functional warmth girdle and possibility to acceptance, the results were that the subjects in their thirties were first, forty something was second, followed by subjects in their twenties, teenagers. It was shown that over 60% subjects were highly distributed. With regard to necessity of functional warmth girdle, every age groups were shown over 3.6 at average. This result was inferred that subjects had positive possibility to acceptance about functional warmth smart girdle.

$LiZn_xMn{2-x}O_4(0\leqq x \leqq$ 0.15) 정극 활물질의 결정 성장 변화와 전기 화학적 특성 (The crystal growth and the electrochemical property of $LiZn_xMn{2-x}O_4(0\leqq x \leqq$ 0.15) cathode material)

  • 정인성;구할본;이진;박계춘
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 춘계학술대회 논문집
    • /
    • pp.133-136
    • /
    • 1999
  • We report on the electrochemical properly of LiZ $n_{x}$Mn $_{2-x}$ $O_4$ for different degrees of Zn substitution(x) Though all cathode material showed spinel phase based on cubic phase in X-ray diffraction, other peaks(M $n_2$ $O_3$ or M $n_3$ $O_4$) gradually exhibited and became intense with the increase of x vague in LiZ $n_{x}$Mn $_{2-x}$ $O_4$. In addtion, TG-DTA analysis exhibited that both LiM $n_2$ $O_4$ and LiZ $n_{0.1}$ M $n_{1.9}$ $O_4$ occurred the weight loss(TG) and the endothermic and exothermic reaction(DTA) until 80$0^{\circ}C$ When x=0.1 in LiZ $n_{x}$Mn $_{2-x}$ $O_4$ cathode materials showed the charge and discharge capacity of about 100mAh/g at first cycle and about 70mAh/g after tooth cycle.cle.e.cle.e.e.e.

  • PDF

양생온도를 고려한 극한지용 초속경 건설재료 개발 (Development Ultra Rapid Hardening Construction Materials on Cold Weather Environment Considering Curing Temperature)

  • 조현우;신현섭;이장화
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권5호
    • /
    • pp.59-66
    • /
    • 2013
  • 한중공사에 있어서 일반 콘크리트는 영하의 기온에서 타설할 경우 양호한 경화를 얻을 수 없으며, 저온에서 동해를 방지하고 경화성을 확보하기 위하여 내한방동제를 첨가하여 사용하고 있다. 초속경 콘크리트를 한중공사에 적용할 경우 초기 급속한 발열반응을 통하여 동해를 입기 전에 소요강도를 확보할 수 있을 것으로 판단된다. 최근 연구되고 있는 마그네시아인산염복합체는 초속경성이고 저온에서도 수화반응이 가능한 것으로 보고되고 있어 새로운 극한지용 건설재료로 사용할 수 있을 것이다. 따라서 본 연구에서는 극한지용 건설재료의 개발을 위한 연구로서, 마그네시아인산염복합체를 개발하고 이 복합체를 사용한 모르타르에 대해 온도의 영향을 고려한 재료물성 평가를 실시하여 적정 배합을 제안하였다.

피리디니움 디나이트라아마이드염의 합성과 특성연구 (Synthesis and Characterization of Pyridinium Dinitramide Salt)

  • 김우람;권윤자;조영민
    • 공업화학
    • /
    • 제27권4호
    • /
    • pp.397-401
    • /
    • 2016
  • 새로운 고체산화제 화합물인 pyridinium dinitramide (Py-DN)는 환경 및 인체에 독성이 적은 비염소계의 에너지물질로서 고체 추진제 뿐만 아니라 단일계 추진제로 활용이 가능한 high performance green propellant (HPGP) 물질이다. 합성반응은 술팜산칼륨(potassium sulfamate, $NH_2SO_3K$)을 출발물질로 시작하였으며, 합성된 Py-DN의 화학적인 구조특성을 적외선분광법과 가시광선-자외선분광법으로 관찰하였다. 또한, 유사한 물성의 친환경 고체산화제인 ammonium dinitramide[ADN, $NH_4N(NO_2)_2$]와 guanidine dinitramide[GDN, $NH_2C(NH_2)NH_2N(NO_2)_2$]의 열특성을 TG/DSC로 분석하여 상대 비교하였다. 본 연구에서 합성한 Py-DN염의 흡열온도는 $77.4^{\circ}C$, 분해온도는 $144.7^{\circ}C$, 발열에너지는 1739 J/g으로 기존의 DN계열 물질보다 열적 반응이 빠르므로 분해온도가 상대적으로 낮아 단일계 추진제의 촉매 분해 시 촉매의 예열온도를 낮출 수 있어 로켓추력기의 연료로 활용할 경우, 낮은 분해온도 적용성에 장점이 있다.

섬유 현탁액내 PAE 고분자 흡착의 열역학적 고찰 (Adsorption Thermodynamics of Polyamidoamide Epichlorohydrin Polymer in an Aqueous Fibrous Suspension)

  • 윤성훈;주광석;이태원;김건한;박병빈
    • 대한화학회지
    • /
    • 제47권3호
    • /
    • pp.220-228
    • /
    • 2003
  • 본 연구는 섬유 교질-현탁액내 PAE 고분자 전해질의 흡착성향과 Lanumuir 및 Freundlich식 흡착 평형에 대한 열역학적 특성을 규명하기 위하여 수행되었다. 섬유의 계면동전위적 특성은 흐름-전기적 방법의 제타전위 측정에 의해 분석되었고, PAE 고분자 흡착량은 고분자 전해질용액의 PCD 적정을 통해 측정되었다. PAE 고분자 내첨은 지료의 제타전위에 크게 영향을 미쳤으며 내첨 초기에는 제타전위 상승 효과가 크게 나타났지만 시간의 경과와 함께 전하 감쇄현상을 나타내었다. PAE 고분자는 저온 또는 상온에서 준-Langmuir 흡착 거동을 보여주었으나 온도가 증가하면서 Freundlich 지수항(v)이 비례적으로 높아지는 결과를 나타내었다. PAE 고분자의 Gibbs 흡착 자유에너지로부터 산출한 트레인 수$(N_{seg})$는 상온에서 약 7~8의 범위로 나타났고 고분자 고리의 노출반경은 약 215 nm로서 $10^{\circ}C$ 온도상승에 대해 점차 9%씩 증가하였다. 지료 내 PAE 고분자의 흡착 엔탈피는 -27~-29 kJ/mol이며 저에너지 물리흡착임이 규명되었다.

배합조건 및 양생온도에 따른 마그네시아 인산염 복합체의 기초물성 평가 (Fundamental Properties of Magnesia-Prosphate Composite Considering Mix Conditions and Curing Temperature)

  • 조현우;강수태;신현섭;이장화
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권6호
    • /
    • pp.163-170
    • /
    • 2012
  • 한중콘크리트 공사에 적용을 검토할 수 있는 초속경 콘크리트는 초기 급속한 발열반응을 통해 동해를 입기 전에 소요의 강도를 확보할 수 있을 것이며, 열 보상을 통해 시공환경이 유지될 경우 강도발현에 필요한 시간을 단축할 수 있는 장점이 있다. 일반 콘크리트는 영하의 기온에서 타설할 경우 양호한 경화를 얻을 수 없으며, 저온에서 동해를 방지하고 경화성을 확보하기 위하여 내한방동제를 첨가하여 사용하고 있다. 그러나, 내한방동제의 대부분은 염화물을 주성분으로 하고 이를 다량으로 사용할 경우, 콘크리트의 동결을 방지하고 시멘트의 수화반응을 촉진시켜 응결시간을 단축하고 초기강도 증진을 유도하는 효과가 있는 반면, 장기재령에서 강도발현이 문제가 되고, 경제성이 떨어진다는 단점이 있다. 최근 연구되고 있는 마그네시아 인산염 복합체는 초속경성이 있고 저온에서도 수화반응이 가능한 것으로 보고되고 있어 새로운 한중공사 및 극한지용 건설재료로 사용할 수 있을 것으로 판단된다. 따라서, 본 연구에서는 한중공사 및 극한지에서 사용이 가능한 건설재료의 개발을 위한 사전 연구의 일환으로서, 마그네시아 인산염 복합체를 활용한 모르타르에 대해 온도의 영향을 고려한 재료 물성 평가를 실시하고 적정 배합을 제안하고자 한다.

DGEBA/방향족 아민(DDM, DDS) 경화제의 벤젠링 사이의 관능기 변화가 물성 변화에 미치는 영향에 대한 연구 (Chemo-Mechanical Analysis of Bifunctional Linear DGEBA/Linear Amine (DDM, DDS) Resin Casting Systems)

  • 명인호;정인재;이재락
    • Composites Research
    • /
    • 제12권4호
    • /
    • pp.71-78
    • /
    • 1999
  • 방향족 아민 경화제의 벤젠링 사이의 관능기 변화가 반응특성, 기계적특성 및 열적특성에 미치는 영향을 고찰하기 위하여 양쪽 말단기에 에폭시기를 가지는 대표적 범용 에폭시수지인 DGEBA (diglycidylether of bisphenolA)와 방향족아민 경화제 diaminodiphenyl methane (DDM), diaminodiphenyl sulphone(DDS) 각각을 1:1의 당량비로 혼합하여 동일한 조건으로 경화하였다. 반응특성, 열 안정성, 에폭사이드기의 전환율, shrinkage(%), 유리전이온도와 선팽창계수, 기계적특성 그리고 굴곡 파단특성을 알아보기 위하여 각각 DSC 분석, TGA 분석, FT-IR 분석, 밀도측정, TMA 분석, 인장시험과 3점 굴곡시험, 광학현미경 시험을 행하였다. 그 결과, 에폭시수지 경화물의 분석, 밀도측정, TMA 분석, 인장시험과 3점 굴곡시험, 광학현미경 시험을 행하였다. 그 결과, 에폭시수지 경화물의 특성은 경화제의 벤젠링 사이의 관능기 구조에 따라 매우 큰 영향을 받았다. 즉, 벤젠링 사이에 길이가 길고 bulky한 술폰기를 포함한 DDS는 epoxiderl의 전환율, shrinkage(%), 유리전이온도, 인장탄성율, 인장강도, 굴곡탄성율 및 굴곡강도의 값이 길이가 짧고 compact한 메틸기를 가지는 DDM 경화물계 보다 높게 나타났지만, 최대발열온도, 열안정성, 선팽창계수의 값은 낮게 나타냈다. 이것은 술폰기의 강한 전기음성도와 메틸기의 전기 양성적인 repulsive한 성질의 차이와 epoxide group의 전환율의 영향인 것으로 판단된다. 굴곡 파단면의 관찰 결과는 DDM경화물계의 feather like structure의 각개 grain의 크기가 DDS 경화물계 보다 작은 것을 확연하게 보여준다.gG1 항체 합성은 spleen B cell과는 달리 TGF-$\beta$3에 의해 증가하였다. 본 실험의 결과는 전반적으로 TGF-$\beta$3가 TGF-$\beta$1과 비슷한 정도로 마우스 B cell의 항체합성에 영향을 미침을 보여준다. 그렇지만, 생체 내에서TGF-$\beta$3의 발현조절이 TGF-$\beta$1과 다를 것으로 예상됨으로 과연 TGF-$\beta$3가 B cell 분화에서 중요한 조절인자로 작용할지는 좀 더 연구되어야 할 것이다.적을 볼 때 적극적으로 수술에 임하는 것이 바람직하다고 사료된다.나타나 이의 규명을 위해서는 향후 p53 단백의 유전자 변이와 두 단백의 발현과 환자의 생존율과의 상관관계에 대한 연 구가 요할 것으로 사료된다.을 줄이기 위한 대책이 도움이 될 것으로 사료된다.4.00$\pm$0.14, 2.50$\pm$ 0.31, 4.02$\pm$0.70으로 기준(1.84$\pm$0.21)에 비하여 IP군과 10 mM 칼슘 전처치군에서 유의하게 증가하였다 (p<0.05). 그러나 허혈대조군에서는 두 분획 모두 기준선과 비교하여 큰 차이가 없었다. 결론: 이상으로 적출 관류 토끼심장에서 장시간 동안의 허혈전 높은 농도의 칼슘으로 전처치하면 허혈후 재관류시 심근기능의 회 복증가는 기대하기 어려우나 IP와 유사한 심근괴사 범위 감소효과가 있으며 이러한 효과는 아마도 칼슘의 매개에 따라 PKC활성화가 일어남으로써 나타나는 것으로 생각된다. 점을 함께 고려하면 그룹 B에서의 더 큰 증폭 효과가 광배근의 활성도 및 수축력의 차이로부터 기인한다고 평가할

  • PDF