• Journal of Wind Energy
• /
• v.13 no.2
• /
• pp.13-22
• /
• 2022

In this study, the resonant motion of a floating offshore wind system due to negative damping was mitigated by peak shaving algorithms of the NREL ROSCO controller, and the decreased gains of the blade pitch controller by the gain detuning method for the floating system was increased to the gains of onshore baseline controller to improve the power performance of the turbine. To check the performance of the controller, the dynamic responses between the existing gain-detuned pitch controller and the ROSCO controller with peak shaving control for an OC4 floating offshore wind system were compared. As a result of DLC1.1 at near-rated wind speed, when peak shaving was applied, the average generator power decreased by 1.9%, but it was confirmed that the standard deviation was reduced and stability was improved with fast pitch regulation. In addition, since peak shaving reduces the maximum thrust of the rotor, was confirmed that not only are the loads of the blades and tower reduced, but the surge motion of the floater is also reduced, and the tension of the mooring lines is reduced.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.33-38
• /
• 1999

This paper proposes a translation approach for PLCs (Programmable logic controllers) converting ladder diagrams directly to native codes, and describes detailed steps of the method followed by performance evaluation. A general-purpose DSP (Digital signal processor) based implementation validates the approach as well. A benchmark test shows that the Proposed translation framework fairly speeds up execution in comparison with the existing interpretation approach.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.4
• /
• pp.161-165
• /
• 2004

This thesis proposes a robust controller introducing the $H_{\infty}$ control theory, one of the robust control theories that can obtain desired control performance while ensuring robustness for the uncertainty and disturbance contained in the power system. This thesis also proposes an improved digital exciter control system for a synchronized generator using a digitally designed controller. Simulation to verify the usefulness of the proposed method was carried. Results show that the proposed control system manifests excellent control performance compared to existing control systems.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.36-41
• /
• 1988

Analog and Digital Speed Control Systems have mutually complementary properties. Analog System has good dynamic characteristics and moderate steady-state accuracy and can be implemented economically with operational a ampliers. Digital System, on the contray, has good static accuracy, but relatively poor dynamic property. So, a hybrid system which uses both digital and analog control can have good static and dynamic characteristics. In this paper, it is shown that a simple digital controller can improve steady-state accuracy of existing analog control system satisfactorily, and some design criteria are presented also.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.918-920
• /
• 1999

In this paper, noble optimal controller is proposed to overcome the relative optimality of the existing method. It use a virtual state which is less weighted then the actual states and input.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.616-619
• /
• 1991

This paper describes the design of fuzzy logic controller for underwater vehicle actuator with high hydroload torque disturbance. For real-time processing of the fuzzy rule, the look-up tables including coarse mode and fine mode are used instead of inference engine process. Computer simulations are done in order to analyze the performance of the proposed algorithm and the very useful results are shown to us by comparing with the existing controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.588-588
• /
• 1991

This paper proposes a compliance robot control algorithm using fuzzy adaptive controller and fuzzy compliance vector generator. In the compliance robot control, we need more adaptivity because the linear modeling in robot dynamics is getting more difficult by contact with external environment. Existing adapitive controllers have difficulty in realtime processing. So in order to overcome it, We adopt fuzzy adaptive controller and propose fuzzy compliance vector generator for flexible compliant motion. We analyze and confirm the proposed algorithm by surface processing experiment with a control system implemented by VME system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.461-465
• /
• 1996

In servo systems such as the computer hard disk, surface mountiong device and robot manipulators, the high precision and high speed are increasingly demanding. In these examples, the repeatable errors exist and the repetitive controller removes these errors effectively by adding signals calculated from the previous cycle errors to the existing feedback controller. The experimental results of the position tracking control and contact force control show that the repetitive control effectively improves the precision of mechanical servo systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.99-102
• /
• 1995

In this paper, we consider the stabilization problem of nonstandard singularly perturbed systems by using state feedback. Different fro the existing sequenetial designn procedures, we propose a parallel design method to construct the stabilizing controller. The method involves solving two completely independent algebraic Riccati equations.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.342-344
• /
• 1994

In this paper, the dynamic characteristics of the existing filter is analyzed to obtain a sinewave current from full bridge inverter with low pass LC filter. The Chevshev's filter, which is most typical low pass filter, is adopted for this investigation and driven controller of full bridge inverter used EV8097BH one-chi p controller.