• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.1
• /
• pp.130-137
• /
• 2009

This paper deals with the comparisons of methodologies to express finite rotations accounting for analysis of the rotor system. Researches have been made to predict a behavior of its rotational motion by introducing Euler angles which turned out to be lack in consistency and exactness of the analysis. To overcome this deficiency a new methodology is applied by using both spherical coordinate and quaternion in the rotor rotation and shows its superiority over choices of the Euler angle in terms of kinetic energy and rotation velocity. It is found through numerical examples that quaternion is a more useful and valid tool to derive the ideal numerical model of the rotor system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.6
• /
• pp.553-561
• /
• 2011

A theoretical approach is carried out to predict the quality factors of flexible modes of a microcantilever on a squeeze-film. The frequency response function of an inertially-excited microcantilever beam is derived using an Euler-Bernoulli beam theory. The external force due to squeeze-film phenomenon is developed from the Reynolds equation. Slip boundary conditions are employed at the interfaces between the fluid and the structure to consider the gas rarefaction effect, and pressure boundary condition at both ends of fluid analysis region is enhanced to increase the exactness of predicted quality factors. To the end, an approximate equation is derived for the first bending mode of the microcantilever. Using the approximate equation, the quality factors of the second and third bending modes are calculated and compared with experimental results of previously reported work. The comparison shows the feasibility of the current approach.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.361-368
• /
• 1999

The Nelder-Mead simplex algorithm has become on of the most widely used methods for nonlinear unconstrained optimization, since 1965. Recently, this algorithm has been reevaluated and many papers on this algorithm are being published. The MATLAB computer software, highly renown in engineering, also provides the Nelder-Mead algorithm and the Denis-Woods modification with FMINS function. The authors made C++ code of these algorithms and compared with FMINS on the convergence behavior and the exactness of solutions. It shows that MATLAB's FMINS is inferior to author's C++ code. So, FMINS should be corrected for every user.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.597-599
• /
• 1997

Cochannel speaker separation is employed when speech from two talkers has been summed into one signal and it is desirable to recover one or both of the speech signals from the composite signal. Cochannel speech occurs in many common situations such as when two AM signals containing speech are transmitted on the same frequency or when two people are speaking simultaneously (e. g., when talking on the telephone). In this paper, the method that separated the speech in such a situation is proposed. Especially, only the voiced sound of few sound states is separated. And the similarity of the signals by the cross correlation between the signals for exactness of original signal and separated signal is proved.

• International Journal of Costume and Fashion
• /
• v.5 no.2
• /
• pp.46-54
• /
• 2005

The Purpose of this research was focused on analyzing how costume was exactly researched for film in comparison with the original Renaissance costume, and how to change the degree of brightness and chroma in costume of two films, 'Shakespeare in Love' and 'Elizabeth: The Virgin Queen'. For these purpose, each costume of main seven scenes was analyzed in terms of silhouette, detail, and trimming. Color image, brightness and chroma of costume were compared with the color chip data from Samsung Design Net. As results, costume from two films had exactness in historical research. but the original costumes were modernly changed by the purpose of director. Color image of costume were used proper colors for the characteristic of the story. Costumes of heroine was numerically changed at the degree qf the brightness and chroma through story-going. By this change, director could effectively give dramatic rhythm for the story. The limitation of this research was that color analysis had been conducted on the screen, and this fact might mean the original colors of film might be different from those of screen.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.94-97
• /
• 2002

A new small signal stability analysis method for eigenvalue analysis is presented. The method is based on the computation of the transition matrix over a specified time interval that corresponds to one cycle operation of the system The method is applicable to any system with or without nonlinear elements. An applicable example of RCF method is presented and the eigenvalues are compared with those of the conventional state space method to show the exactness of the computed eigenvalues of the new method. Also, the variations of oscillation modes which were caused by the switching operation can be analyzed exactly using RCF method.

• Archives of design research
• /
• v.13 no.1
• /
• pp.87-100
• /
• 2000

This thesis concentrates on modern design with understanding the ooncept of design thinking. Functionalism and exactness in design result from the project that modern design attempted to change everyday life with mechanical design language. There is thought to be convenient and profitable, to link a function and a need, to make something with building-up process, and to give judgement something by dualism in the other side. That thoughts were produced by not only transition of production system from by hand to by machine but also atmosphere of society that enables one to know himself as a member of modern age.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.4 s.193
• /
• pp.109-114
• /
• 2007

The mobility (degree of freedom) of mechanisms can be regarded as independent coordinate to define its position. This concept is essential for kinematics, and for designing mechanisms in the practical point of view. Gruebler's equation has been applied to estimate the mobility using number of links and joints of a mechanism. In practical case, there are many types of mechanisms, which transfer motion by direct contact between two links. However, no exact kinematic definition has existed for the joint that the contact takes place in a mechanism. In this paper, a new concept of contact joint is defined and modified Gruebler's equation is suggested to calculate mobility of a mechanism with the joint. This concept would be useful in mechanism design because it will be possible to manage many contact mechanisms with kinematic exactness.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.117-120
• /
• 2002

This research is related with the development of CNC spinning machine. The purpose is to use for developing the practical parts of automobile such as dams, pulley, etc. The machine structure is made by heavy duty frame for the steel products with high strength. The hydraulic servo system is applied for giving the exactness of control. In order to improve the spinnability, the involute curves can be generated in CNC program In the future, this spinning machine is applicable to development of all the parts of industry such as electric parts, automobile parts, aerospace and the military supplies.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.347-348
• /
• 2008

Wind energy issued as most spotlight general energy by excellence of actuality as well as economical efficiency, solving environmental problem which caused by creating the energy and possibility of eternal production. Accordingly, government is at the stage of corresponding level by requesting development of new technology to the developed countries as a part of national key industries. The grievous situation from such a rapid movement is meteorological comprehension and assessment as well as the problem of estimation exactness about the wind. In this study, numerical simulation from the MM5 is counducted for 3km resolution and data assimilation using QuikSCAT seawinds data is applied.