• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.202-207
• /
• 2008

Measures for coping with energy shortage are being sought all over the world. Following such a phenomenon, effort to use less energy in the design of buildings and equipment are being conducted. In particular, a program to evaluate the performance of a building comes into the spotlight. However. indispensable standard wether data to estimate the exact energy consumption of a building is currently unprepared. Thus, after appling standard weather data for four weather factors which were used in previous researches to Visual DOE 4.0, we compared it with the result of the existing data and evaluated them. For the monthly cooling and heating load of our target building, we used revised data for June, July, August, and September during which cooling load is applied. When not the existing data but the revised data was used, the research shows that an average of 14.9% increased in June, August, and September except for July. Also, in a case of heating load, the result by the revised data shows a reduction of an average of 11.9% from October to April during which heating load is applied. In particular, the heating loads of all months for which the revised data was used were more low than those of the existing data. In the maximum cooling and heating load according to load factors, the loads by residents and illumination for which the revised data was used were the same as those of the existing data, but the maximum cooling loads used by the two data have a difference in structures such as walls and roofs. Through the above results, the research cannot clearly grasp which weather data influences the cooling and heating load of a building. However, in the maximum loads by the change of weather data in four factors (dry-bulb temperature, web-bulb temperature, cloud amount, and wind speed) among 14 weather factors, the research shows that 5.95% in cooling load and 27.56% in heating load increased, and these results cannot be ignored. In order to make weather data for Performing energy performance evaluation for future buildings, the flow of weather data for the Present and past should be obviously grasped.

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.59-72
• /
• 1985

This paper deals with the numerical analysis by the (mite element method introducing Biot's theory of consolidation and the modified Cambridge model proposed by Roscoe school of Cambridge University as constitutive equation and using Christian-Boehner's technique. Especially, time interval and division of elements are investigated in vies of stability and economics. In order to check the validity of author's program, the program was tested with one-dimensional consolidation case followed by Terzaghi's exact solution and with the results of the Magnan's analysis for existing banking carried out for study at Cubzac-les-ports in France. The main conclusions obtained are summarized as follows: 1. In the case of one-dimensional consolidation, the more divided the elements are near the surface of the foundation, the higher the accuracy of the numerical analysis is. 2. For the time interval, it is stable to divide 20 times per 1-lg cycle. 3. At the element which has long drain distance, the Mandel-fryer effect appears due to time lag. 4. Lateral displacement at an initial loading stage predicted by author's program, in which the load was assumed as not concentrative. but rather in grid form, is well consistent with the value of observation. 5. The pore water pressure predicted by author's program has a better accordance with the value of observation compared with Magnan's results. 6. Optimum construction control by Matsuo-Kawamura's method is possible with the predicted lateral displacement and settlement by the program.

• The Korean Journal of Emergency Medical Services
• /
• v.15 no.2
• /
• pp.101-108
• /
• 2011

Purpose: Cardiopulmonary resuscitation (CPR) prevents tissue necrosis of the brain and cardiac muscle in the cardiac arrest patient and requires exact skills in order to increase survival rate. Through comparison of the training effects of feedback manikin and non-feedback manikin, this study present the effective CPR device to CPR instructors. Method: This CPR course for 80 students by using Resusci Anne $SkillReporter^{TM}$ (RASR; Laerdal Medical, Stavanger, Norway) and Actar 911 $Squadron^{TM}$ (A911; Vital Signs, New Jersey, USA) held on December 22, 2009. Thirty seven students and two assistants were placed in one laboratory, there were five RASR manikins which provide the LED performance indicator, not the metronome. Forty two students and two assistants were placed in the other laboratory, there were 20 A911 manikins which don't provide any feedback indicator. Chest compression scores and ventilation compression scores obtaining from two groups were analysed statistically by using independent t-test. Results: Chest compression scores, average depth (mm) was 37.5 in RASR and 41.80 A911 (p=.004), too depth (#) was 2.8 in RASR and 19.4 A911 (p=.005), average number per min (#/min) was 64.4 in RASR and 68.2 A911 (p=.038), wrong hand position (#/min) was 10.9 in RASR and 30.8 A911 (p=.040). Four items that showed better scores in group RASR had statistically significant difference. Ventilation compression scores, percent correct (%) was 40.6 in RASR and 20.6 A911 (p<.001), number correct (#) was 4.7 in RASR and 2.1 A911 (p=.002), too fast (#) was 0.9 in RASR and 2.9 A911 (p=.003), average volume (ml) was 536.5 in RASR and 707.1 A911 (p=.011). Also, three items that showed better scores in group RASR had statistically significant difference. Conclusions: Regarding the positive effect of CPR training feedback, comparison between the real-time visual feedback manikin (RASR) and the non-feedback manikin (A911) showed that RASR had better results than A911 in chest compression except average number per min (it means that we need harder chest manikin) and ventilation. Verification of the training effect in the real world such as CPR outcomes is also necessary. A proper application of manikin in training circumstances and research on retention of CPR skills will be needed.

• Korean Journal of Occupational Health Nursing
• /
• v.9 no.1
• /
• pp.39-48
• /
• 2000

Hyperlipemia is the most leading risk factor of cardiovascular disease which is the main cause of death in Korea. However, there is a tendency to neglect the prevention and treatment since it has no specific symptoms. It has been reported that the level of serum-lipid can be lowered by the improvement of eating habits. Therefore, it is highly likely that the development of programs on the improvement of eating habits through behavioral theory is required to the community nursing practice. The theory of planned behavior, which assumes that human behaviors are determined by one's intention to carry out the behavior, can be characterized by the point that behaviors are not only individual factors but also social behaviors relating to subjective norms. It is widely recognized that this theory has a high predictability on health behavior due to it's simplicity clearness, and measurability as well as high quality of being general. Thus, the theory of planned behavior could be useful in developing a model of a health promotion program to the change of behaviors of the risk group of cardiovascular disease. Consequently, based on the theory of planned behavior, the purpose of this study is to develop an intention promotion program of the diet, and then to testify the effects. The sample of this study consisted of 26 industrial workers who had proved hyperlipemia from a medical examination in 1996 (experimental group 13, control group 13). The intention promotion program, which includes education, monitoring, pressure, counselling on the level of individuals, families and organizations, was conducted for 10 weeks The purpose of this program was to promoting intention of the diet through changes of the prerequisite factors of intention such as behavioral belief, outcome evaluation, normative belief and control belief. When it came to data analysis, the ${\chi}^2$-test and Fisher's Exact test were used to compare the general characteristics between the experimental and the control group, an independent t-test for the other variables. ANOVA was used to the test hypothesis, and the Pearson correlation test for variable's correlation. The results of this study can be summarized as follows ; 1) There was a significant increase in the intention(F=18.51, p=.00) of diet in the experimental group. 2) Diets(F=32.51, p=.001) in the experimental group were better carried out than in the control group. 5) There was a moderate correlation between the intention of diet and performance (r=.587. p=.003). From the results, it can be concluded that the intention promotion program is very effective, leading to the change of health promotion behavior. Above all, it is really valuable that the intention promotion program in this study regards health promotion behavior as a social behavior and that intervention was done on the level of family and organization. Consequently, when performing a health promotion program, social approach elevating the intention should go hand in hand in order to make the program effective.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.6
• /
• pp.686-692
• /
• 2001

Background : Outbreaks of multidrug-resistant tuberculosis(MDR-TB) are caused by the low rate of treatment response due to limitation in number of available drugs and high rates of adverse drug side-effects. This study analysed the risk factors for MDR-TB patients, who did not respond to treatment, with an aim to improve the rate of treatment response. Methods : Retrospective study of 111 MDR-TB patients at National Mokpo Tuberculosis Hospital from Jan. 1996 to Dec. 1998 was made. The patients were separated into two groups ; group I comprised of patients who were treated successfully and group II comprised of those were not treated successfully. In order to analyze the risk factors for treatment failure, differences between the two groups were compared and the confidence limit regarding the results were tested using an independent t-test. chi-square test and a Fisher's exact test. Results : The treatment failure rate of MDR-TB patients was 32% (36 patients), and treatment success rate 68%(75 patients). This study found no significant difference between two groups in terms of age, sex, family history, extent of the disease on the chest X-ray, the number of sensitive drugs in the treatment regimen, and the number of sensitive bactericidal drugs in the treatment regimen (p>0.05). However, a past history of pulmonary tuberculosis, cavitary lesions on the chest X-ray, the number of treatments, the number of resistant drugs and the number of drugs used showed a significant difference(p<0.05). Conclusion : The rate of treatment failure in MDR-TB was increased by a past history of pulmonary tuberculosis, cavitary lesions on the chest X-ray, the number of treatments, the number of resistant drugs and the number of drugs used. For improving the treatment response of MDR-TB, every effort should be made to reduce the drug resistance caused by failure of the first treatment.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.12-22
• /
• 2013

Construction industry throughout the construction projects life cycle using BIM is able to manage information. Among them, BIM-based quantity take-off is directly connected to the data of the construction business as an important management element that is essential for one of the management factors of feasibility study and economic analysis. In addition, the result of BIM-based quantity take-off can be varied depending on modeler, so the exact guideline for BIM modeling is necessary. The BIM-based quantity take-off in terms of reliability and accuracy of the information is very important. Therefore, this study verified the BIM modeling of the apartment interior materials using both separate object and composite object was validated the quantitative comparison of the difference in BIM-based quantity take-off for accuracy & reliability judgment of BIM-based quantity take-off and realistic & desirable suggestion of BIM modeling way. As the result of this study, it is preferable to model various interior materials to use separate object for the purpose of correct BIM-based quantity take-off, but the realistic way of the BIM modeling using both separate object and composite object jointly was verified in order to judge BIM-based quantity take-off in terms of work productivity.

• Journal of Environmental Science International
• /
• v.13 no.1
• /
• pp.99-107
• /
• 2004

This research is to determine the level of environmental pollution at a blasting construction area which is the origin of noise, vibration, and suspended particle, and to compare the results with other domestic and international standard data. This experiment is also to find out the effects resulting from blasting construction and to propose a plan that can decrease environmental pollution. The blasting construction area is a factory site which is about one and half million square meter and sewage disposal plant is about ninety thousand square meter. Both were selected as the areas for the tests to be conducted in determination test. The test to determine the level of noise, vibration, and total suspended particle was conducted thirty times around the blasting construction area by comparing measurement results and numerical analysis. However, as the test was not conducted in the laboratory but in the actual blasting construction area, it was not possible to do the test with the same exact conditions each true. Therefore, the test was not ideal as conditions could change from test to test. For the most part, the level of noise was below the standard level of 70dB. Every vibration test was under the standard limitation. For example, a house, 200m away was tested for noise and vibration and the level was found to be under the 0.2 cm/sec which is the standard for specialty designed cultural sites., i.e very low level. Also a buried oil pipeline that was 30m away also marked under 2.0cm/sec which is the norm for an industrial area. However, if there were an oil pipeline under the house, the amount of charging gunpowder per hole should be decreased compared to the amount used in the test. The test result for suspended particles under the standard limitation which is 24hour average 300$\mu\textrm{g}$/㎥ at a distance from blasting wavelength, but at detonator, total suspended particle from the blast origin exceeded the standard limitation. If explosion occurs when it detonates in the hole, most of the energy would be absorbed in the crushing of rocks, but some remaining energy would make noises and vibration inevitable. So the important thing is how to minimize the environmental pollution from the blasting. There should be regulations in order that the standard limitation is not exceeded, and to decrease the environmental pollution from the blasting.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.167-174
• /
• 2008

Mandibular first molar and primary molars usually have two roots, on the mesial and distal sides. Occasionally, these molars have an extra root located in the distolingual aspect. Prevalence of the 3-rooted first permanent molar shows ethnic variation, ranging from about 3% in Caucasian to about 20% in Mongoloid group, which includes Chinese, Japanese, Eskimo, American and Canadian Indians. The frequency of the mandibular molar with three roots decreases in the order of the first permanent molar, the second primary molar, and the first primary molar. If the mandibular first or second primary molar has an additional distolingual root, the adjacent molars, including the first permanent molar, posterior to it also may have it. Coronal morphologic change can occur in the mandibular first primary molars with three roots: the crown had more triangular-shape compared to the one with two roots, possibly affected by the presence of additional distolingual root. Clinically, exact diagnosis and treatment should be taken with those teeth for pulp canal treatment, extraction, and SS Cr.

• Journal of Internet Computing and Services
• /
• v.19 no.5
• /
• pp.33-41
• /
• 2018

Recently, Internet technology has developed, various programs are being created and therefore various codes are being made through many authors. On this aspect, some author deceive a program or code written by other particular author as they make it themselves and use other writers' code indiscriminately, or not indicating the exact code which has been used. Due to this makes it more and more difficult to protect the code. In this paper, we propose author identification framework using Authorship Analysis theory and Natural Language Processing(NLP) based on Convolutional Neural Network(CNN). We apply Authorship Analysis theory to extract features for author identification in the source code, and combine them with the features being used text mining to perform author identification using machine learning. In addition, applying CNN based natural language processing method to source code for code author classification. Therefore, we propose a framework for the identification of authors using the Authorship Analysis theory and the CNN. In order to identify the author, we need special features for identifying the authors only, and the NLP method based on the CNN is able to apply language with a special system such as source code and identify the author. identification accuracy based on Authorship Analysis theory is 95.1% and identification accuracy applied to CNN is 98%.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1299-1308
• /
• 2016

Our previous studies clearly demonstrated that a combination of WP 631 and Epo B has higher activity against ovarian cancer cells than either of these compounds used separately. In order to fully understand the exact mechanism of action in combination, we assessed effects on the cell cycle of SKOV-3 cells. We evaluated three control points essential for WP 631 and Epo B action to determine which cell cycle-regulating proteins (CDK1/cyclin B complex, EpCAM or HMGB1) mediate activity. The effects of the drug on the cell cycle were measured based on the nuclear DNA content using flow cytometry. Expression of cell cycle-regulating genes was analyzed using real-time PCR. It was discovered that WP 631, at the tested concentration, did not affect the SKOV-3 cell cycle. Epo B caused significant G2/M arrest, whereas the drug combination induced stronger apoptosis and lower mitotic arrest than Epo B alone. This is very important information from the point of view of the fight against cancer, as, while mitotic arrest in Epo B-treated cells could be overcame after DNA damage repair, apoptosis which occurs after mitotic slippage in combination-treated cells is irreversible. It clearly explains the higher activity of the drug combination in comparison to Epo B alone. Epo B acts via the CDK1/cyclin B complex and has the ability to inhibit CDK1, which may be a promising strategy for ovarian cancer treatment in the future. The drug combination diminishes EpCAM and HMGB1 expression to a greater degree than either WP 631 and Epo B alone. Owing to the fact that the high expression of these two proteins is a poor prognostic factor for ovarian cancer, a decrease in their expression, observed in our studies, may result in improved efficacy of cancer therapy. The presented findings show that the combination of WP 631 and Epo B is a better therapeutic option than either of these drugs alone.