• 제목/요약/키워드: event control process

검색결과 175건 처리시간 0.041초

빈곤의 세대간 탈피 경험 (Experience of Poverty Exit across Generations)

  • 김교성;노혜진
    • 사회복지연구
    • /
    • 제42권1호
    • /
    • pp.243-278
    • /
    • 2011
  • 본 연구에서는 센의 실현가능능력 접근을 활용하여 보다 확대된 개념으로 빈곤을 조망하면서, 빈곤의 세대간 탈피에 관한 삶의 경험을 이해하고자 한다. 이를 위하여 생애초기 빈곤을 경험했으나 현재 이를 탈피한 자녀세대와 부모세대 참여자와의 심층 면접을 실시하였고, 빈곤의 세대간 탈피과정에서 발생하는 경험과 상호작용을 보다 심도있게 파악하고자 근거이론을 활용하였다. 분석결과 '빈곤' 의 의미는 자원 및 상황에 대하여 개인이 통제를 발휘하는 주체성의 성취와 자유가 부족한 상태임을 확인할 수 있었다. 따라서 빈곤의 탈피는 기능의 성취뿐만 아니라 실현가능능력을 회복한 상태라고 볼 수 있다. 이에 기초하여 세대간 탈피과정을 살펴본 결과, 관계로부터의 도움과 생애주기에서 단계별 이행이 연속적이었다는 것이 중심 현상으로 등장하였다. 이러한 중심현상은 빈곤의 탈피에서 중요한 사건이지만 동시에 불완전한 속성을 가지고 있다. 왜냐하면 관계로부터의 도움은 개인의 통제범위를 일정부분 벗어난 것이고, 참여자들이 이행의 과정에서 충분한 기간을 가지지 못해 2차 노동 시장에서 벗어나지 못하고 있기 때문이다. 따라서 본 연구에서는 관계로부터의 도움이 가지는 한계와 이행이 주는 소득상실의 위험을 최소화하기 위한 우선과제로서 국가복지의 확대와 이행지원 전략을 제안하였다.

효율적인 비상대응을 위한 Process High Alarm의 Priority 분석 (The Research of Process High Alarm Priority Analysis for Efficient Emergency Response)

  • 김영세;조규선;전진우;김병직;이준원;박교식
    • Korean Chemical Engineering Research
    • /
    • 제58권4호
    • /
    • pp.604-609
    • /
    • 2020
  • 본 연구에서는 국내 석유화학산업에 설치 운영 중인 DCS (Distributed Control System)에 설정되어 실제 운전에 적용하고 있는 PV high trip point에 설정된 alarm의 우선순위를 ISA 18.2 국제규격 또는 EEMUA 191 guideline 에서 제시하고 있는 기준과 비교 분석하여 현재 사용 중인 공정 alarm의 우선순위 관리상태를 확인하는 것이 목적이다. 공정 문제 발생 시 과도하게 설정된 high alarm이 짧은 시간 안에 운전자에게 제공되어 최우선으로 처리해야 할 alarm을 분별하기 어려워지는 상황이 발생하게 된다. 이로 인하여 운전자가 정해진 시간 안에 적절한 조치를 진행하지 못할 가능성이 커지고 예상하지 못한 공정의 shutdown이나 공정사고로 이어지는 사례가 다수 보고되었다. 그리하여 본연구에서는 alarm 관리에 관련된 국제규격을 소개하고 국내 석유화학산업 현장에 사용하고 있는 alarm 관리 수준을 확인하여 향후 국가 산단의 석유화학 공정에 발생할 수 있는 잠재적 위험을 알리고 위험 요소를 감소시킬 방안을 제시하고자 한다.

퍼지제어를 이용한 관련성 통합탐지 (An Aggregate Detection of Event Correlation using Fuzzy Control)

  • 김용민
    • 정보보호학회논문지
    • /
    • 제13권3호
    • /
    • pp.135-144
    • /
    • 2003
  • 침입탐지시스템은 사용된 알고리즘이나 기법의 특성에 따라 여러 탐지영역에 대해서 상이한 탐지결과를 나타내게된다. 따라서 서로 다른 탐지영역을 갖는 여러 탐지시스템들의 결과를 통합함으로써 탐지영역을 넓힐 수 있는 통합탐지 방법이 필요하다. 또한 통합 시에 발생할 수 있는 수많은 잘못된 보고의 수를 최소화함으로써 보안 관리자의 업무부담을 줄이고 탐지결과의 정확성을 높일 필요가 있다. 이 논문에서는 시스템 사용행위에 대해서 각 탐지시스템들이 모호한 판정의 결과값을 내어놓는 경우 분석된 탐지시스템의 특성을 퍼지추론을 이용하여 통합탐지 한다. 분석된 탐지 특성은 퍼지제어의 과정에서 적용된 각 탐지시스템에 대한 소속함수와 제어규칙으로 표현한다. 그리고, 모호한 판정 값을 통합하고 잘못된 보고의 숫자를 최소화하였으며, 여러 번의 실험을 통해 결정된 임계값의 적용으로 추론의 적용대상이 최소화되도록 하였다.

상수도관망 재난관리 및 복구를 위한 데이터기반 이상탐지 방법론 개발 (Data-driven event detection method for efficient management and recovery of water distribution system man-made disasters)

  • 정동휘;안재현
    • 한국수자원학회논문집
    • /
    • 제51권8호
    • /
    • pp.703-711
    • /
    • 2018
  • 상수도관의 파열은 과도한 압력, 노후화, 온도변화 나 지진 등에 의한 지반이동에 의해 발생한다. 상수도관 파열이 대규모 단수, 싱크홀 등과 같은 더 심각한 피해 이어지지 않도록 신속하게 탐지 및 대응하는 것이 중요하다. 본 연구에서는 상수도관 파열 탐지를 위해 개선 Western Electric Company (WECO) 방법을 개발하였다. 개선 WECO 방법은 통계적공정관리기법 중 하나인 기존 WECO 방법에 임계치 조정자(w)를 추가하여 대상 네트워크에 적합한 이상탐지 의사결정을 할 수 있도록 했다. 개발된 개선 WECO 방법을 미국 텍사스 오스틴 관망에 적용 및 검증하였다. 상수도관 파열 발생 시 측정한 비정상데이터와 수요량 변동만 고려한 정상데이터를 이용하여 기존 및 개선 WECO 방법을 비교하였다. 최적 임계치 조정자 w값을 결정하기 위해 민감도 분석을 수행하였으며, 다양한 계측시간 간격 데이터(dt = 5, 10, 15분 등)의 영향도 분석하였다. 각 경우 별 탐지성능은 탐지확률, 오경보확률, 평균탐지시간을 계산하여 비교하였다. 본 연구에서는 도출된 결과를 바탕으로 WECO 방법을 실제 상수도관 파열 탐지에 적용하기 위한 가이드라인을 제공한다.

MANET환경에서 Interrupt Message와 Backup path 기법에 기반한 AODV의 성능개선 (Performance Enhancement of AODV Routing Protocol Based on Interrupt Message and Backup Path Strategy in MANET)

  • 이윤경;김주균
    • 한국통신학회논문지
    • /
    • 제40권7호
    • /
    • pp.1313-1329
    • /
    • 2015
  • MANET 환경에서 빈번한 경로 단절은 반복된 경로 탐색으로 인해 제어 패킷 오버헤드와 패킷 손실을 증가시킨다. AODV-I는 event driven방식을 이용하여 주기적인 Hello 메시지를 제거함으로써 AODV의 성능을 개선하였다. Hello 메시지와 달리 각 이벤트마다 전송되는 인터럽트 메시지는 이웃노드의 상태를 알 수 있어 링크 단절을 탐지 및 예측도 할 수 있다. 따라서 AODV-I의 성능은 각 인터럽트 메시지 종류에 따라 처리 절차를 추가함으로써 더욱 개선될 수 있고, 또한 AODV의 단일경로로 인한 문제를 백업 경로기법을 추가하여 개선하는 것도 가능하다. 본 연구에서는 경로 탐색 수와 전송 지연을 줄이기 위해 개선된 백업 경로방식과 인터럽트 메시지 방식을 결합한 AODV-IB를 제안한다. AODV-IB는 각 인터럽트 메시지마다 링크 단절 예측과 탐지에 대한 처리 절차를 추가하여 AODV-I를 개선한다. 또한 추가적인 제어 패킷 없이 지연을 최소화하도록 개선한 백업 경로 방식도 구현한다. QualNet 5.0을 사용하여 구현한 시뮬레이션 결과는 AODV-I에 비해 제안하는 AODV-IB가 더 좋은 성능을 나타낸다.

산림 활엽수 지역의 강우유출수 유출특성 및 EMC 산정 (Determination of EMC and Washoff Characteristics of Stormwater Runoff from Broad-Leaved Forest Areas)

  • 강창국;이소영;조안;이재운;김이형
    • 환경영향평가
    • /
    • 제18권6호
    • /
    • pp.393-399
    • /
    • 2009
  • The water of rivers and lakes are affecting by point and nonpoint source pollutions. The point source pollution can be controlled by establishing the treatment plants. However, nonpoint source pollution by various human activities is not easy to be controlled because it is difficult to determine the exits of the water flow and have many exit points. Due to contribution of nonpoint source pollution, the achievement ratio of water quality in rivers and lakes is not high. TMDL is the outstanding water quality control policy because all of the pollutant loadings from the watershed area are counting on the input loads. Our aqua-ecosystem has self-purification process by biological, physical and ecological processes. The self-purification process can remove the pollutant load from background concentrations. Usually forest area is main source of background concentrations. In Korea, about 70% of the national boundary area consists of mountains. This study is conducting as part of long-term monitoring to determine the Event Mean Concentration during a storm. The monitoring was performed on a broad-leaved tree area.

수요가 재생 도착과정을 따르는 (s, S) 재고 시스템에서 시뮬레이션 민감도 분석을 이용한 최적 전략 (Optimal Policy for (s, S) Inventory System Characterized by Renewal Arrival Process of Demand through Simulation Sensitivity Analysis)

  • 권치명
    • 한국시뮬레이션학회논문지
    • /
    • 제12권3호
    • /
    • pp.31-40
    • /
    • 2003
  • This paper studies an optimal policy for a certain class of (s, S) inventory control systems, where the demands are characterized by the renewal arrival process. To minimize the average cost over a simulation period, we apply a stochastic optimization algorithm which uses the gradients of parameters, s and S. We obtain the gradients of objective function with respect to ordering amount S and reorder point s via a combined perturbation method. This method uses the infinitesimal perturbation analysis and the smoothed perturbation analysis alternatively according to occurrences of ordering event changes. The optimal estimates of s and S from our simulation results are quite accurate. We consider that this may be due to the estimated gradients of little noise from the regenerative system simulation, and their effect on search procedure when we apply the stochastic optimization algorithm. The directions for future study stemming from this research pertain to extension to the more general inventory system with regard to demand distribution, backlogging policy, lead time, and inter-arrival times of demands. Another direction involves the efficiency of stochastic optimization algorithm related to searching procedure for an improving point of (s, S).

  • PDF

슬라이드 링크 구조를 이용한 원터치 완강기 (One-touch Descending Lifeline with Sliding Linkage Structure)

  • 김원찬;나다율;문혜인;김상현
    • 한국기계가공학회지
    • /
    • 제20권9호
    • /
    • pp.42-47
    • /
    • 2021
  • A one-touch descending lifeline that can easily be installed and rapidly evacuated in the event of a fire accident in high-rise buildings was proposed to overcome difficulties of conventional descending lifeline such as complex installation methods and procedures. However, this lifeline exhibits limitations such as restrictions in installation location and large apparatus size. Therefore, this paper proposes a sliding-type descending lifeline, which has a similar operation to that of current one-touch descending lifeline and solves the aforementioned limitations. A double square link mechanism including a sliding four-bar linkage is proposed and the descending lifeline support is redesigned to unfold in two different planes, allowing 3D movement. Additionally, the shape of the support frame is designed to obtain two attachment surfaces that can be attached to a wall, irrespective of the angle between the window and the inner wall. FEA analysis using ABAQUS is performed to ensure that the robustness of the presented support complies with the Fire Control Act Enforcement Decree. Finally, the feasibility of the proposed sliding one-touch descending lifeline is verified through fabrication.

Adverse Events of Electronic Moxibustion Treatment for Knee Osteoarthritis: Case Reports and a Literature Review

  • Oh, Yoona;Lee, Jisun;Kim, Yeonhak;Kim, Eun Seok;Kim, Kun Hyung;Lee, Byung Ryul;Yang, Gi Young
    • Journal of Acupuncture Research
    • /
    • 제39권1호
    • /
    • pp.29-35
    • /
    • 2022
  • Background: Electronic moxibustion has the advantage of temperature control and maintenance, and overcomes the limitations of the existing moxibustion process without the use of the combustion process. However, as the application of electronic moxibustion in clinical practice has increased, safety issues are emerging. Methods: Clinical cases of electronic moxibustion treatment for knee osteoarthritis where burns occurred were collected. In addition, adverse events reported in clinical studies using electronic moxibustion for patients with knee osteoarthritis were collected from studies retrieved from Korean and international databases. Results: There were 3 cases of superficial 2nd degree burns retrospectively collected through chart reviews. Among the selected 5 studies for literature review, 2 studies reported adverse events which were burns milder than those reported in these 3 cases in this retrospective case review. Conclusion: Since the risk of superficial 2nd degree burn was discovered in the cases reviewed, further research on safe electronic moxibustion treatment is required without compromising the effectiveness of moxibustion.

카본블랙 제조공정의 안전성 향상에 관한 연구 (A Study on the Safety Improvement of Carbon Black Manufacturing Process)

  • 주종율;정필훈;이성은
    • 대한안전경영과학회지
    • /
    • 제25권4호
    • /
    • pp.153-161
    • /
    • 2023
  • Carbon black is a material in the form of fine black powder obtained by incomplete combustion or pyrolysis of hydrocarbons, and is composed of 90-99% carbon, and the rest is composed of hydrogen and oxygen. In the event of an emergency during the manufacture of carbon black, the generated tail gas should be safely discharged through an emergency line to prevent fire, explosion, and environmental pollution accidents caused by the tail gas. If the pressure continues to rise, the pressure control valve shall operate and the rupture plate shall be ruptured sequentially and the tail gas shall be discharged to the vent stack through the emergency line. As an emergency emission system, even if some untreated substances in the tail gas are released into the atmosphere, they are lighter than air, so it is safe to discharge them to a safe place through the Vent Stack. If the gas pressure is rising or worse, it is discharged from the Vent Stackine, and discharging fuel.