• Journal of Food Hygiene and Safety
• /
• v.18 no.1
• /
• pp.14-24
• /
• 2003

Two aims of the present study were the evaluation of hygienic, microbial safety on food services of elementary schools in Western Gyeongnam province, and then, the construction of database for the SSOP (Sanitation Standard Operation Procedures) practice. A total of 98 samples were collected from drinking water, waterworks, kitchen utensils, kitchen equipments, employees and cooked foods. Total bacteria was counted and pathogenic bacteria such E. coli, salmonella, yersinia, vibrio parahaemolyticus and staphylococcus were identified based on the biochemical analysis. Following are the results: the number of bacteria showed from 1.0x10$^2$CFU/ mL to 1.0x10$^{6}$ CFU/mL in most samples, which the level exceeds normal range. Over 1.0x10$^{5}$ CFU/ml bacteria were observed from the kimchi in 4 places (B, C, D, E), because cooked food such as kimchi had not been heated. As a rule, the bacterium level in place B was higher than that in any of the other places. E-coli were isolated from kitchen knives (C, E) and Kimchi (E): staphylococci were isolated from drinking water (A), hands (D), refrigerator (E) and apron (E). But, salmonella, vibrio and yersinia were not detected in anywhere. In conclusion, the presence of bacteria and pathogenic agents in school food service was closely related to hygienic practice. For that reason, it is necessary to have more systematic and efficient management in order to enhance the food safety.

• Journal of Intelligence and Information Systems
• /
• v.15 no.1
• /
• pp.51-64
• /
• 2009

A location tracking sensor such as GPS, INS, Radar, and optical equipments is used in tracking Maneuvering Targets with a multi-sensor, and such systems are used to track, detect, and control UAV, guided missile, and spaceship. Until now, Most of the studies related to tracking Maneuvering Targets are on fusing multiple Radars, or adding a supplementary sensor to INS and GPS. However, A study is required to change the degree of application in fusions since the system property and error property are different from sensors. In this paper, we perform the error analysis of the sensor properties by adding a ground radar to GPS and INS for improving the tracking performance by multi-sensor fusion, and suggest the tracking algorithm that improves the precision and stability by changing the sensor probability of each sensor according to the error. For evaluation, we extract the altitude values in a simulation for the trajectory of UAV and apply the suggested algorithm to carry out the performance analysis. In this study, we change the weight of the evaluated values according to the degree of error between the navigation information of each sensor to improve the precision of navigation information, and made it possible to have a strong tracking which is not affected by external purposed environmental change and disturbance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.417-421
• /
• 2018

Carboxytherapy is very similar to mesotherapy in terms of methods, conditions it treats, and outcomes. An important difference consider, however, is that carboxytherapy administers carbon dioxide gas into the subcutaneous layer, just underneath the skin, whereas mesotherapy administers a cocktail of vitamins, minerals, and drugs and into the mesoderm of the skin. There have been many previous case reports of complications of mesotherapy such as hematoma, granulomatous panniculitis, cellulitis, and abscesses. However, complications of carboxytherapy have rarely been reported because the carbon dioxide gas is absorbed within a week and is infused into the subcutaneous and superficial layers. A 27-year-old woman who had twice undergone carboxytherapy to reduce abdominal fat (3 days and 2 weeks ago) at an oriental medical clinic visited the emergency department due to high fever, myalgia, severe back pain, and subcutaneous emphysema from the buttocks to the lower chest wall area. A computed tomography (CT) scan was performed for diagnosis and treatment. We immediately started broad spectrum antibiotics and consulted with the department of radiology, which could not rule out acute peritonitis due to needle injury. A radiologist confirmed abdominal myositis and needle puncture induced acute pyelonephritis. Pyelonephritis can even lead to septicemia, which can have fatal consequences. Therefore, if the patient has costovertebral or back pain after undergoing needle puncture or acupuncture therapy, the emergency physcians need careful initial evaluation for diagnosis and treatment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.723-731
• /
• 2020

The design of offshore plants should reflect the various requirements of the owner and the classification society. For a topside module mounted on an of shore structure, the design process is very demanding because of the large spatial constraints and the many requirements related to marine environmental conditions and safety such as the movement of the structure. In this study, the load acting on the hydraulic power unit, which is one of the main equipment in the topside module, was calculated according to the DNVGL rule; the structural safety was evaluated according to each load condition and the structural reliability of the developed product was improved. For structural analysis, MSC software was used, and structural analysis was performed under five load conditions to review structural safety for various movements. The results show that the maximum stress occurred during pitching toward the stern (Load Case 5). The stress level was approximately 85 % of the allowable stress, and the maximum deformation was approximately 5 % of the allowable value. The structural safety was confirmed, and no intermember interference occurred.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1141-1149
• /
• 2009

In Bone Mineral Density(BMD) measurements, accuracy and precision must be superior in order to know the small changes in bone mineral density and actual biological changes. Therefore the purpose of this study is to increase the reliability of bone mineral density inspection through appropriate management of image quality from machines and inspectors. For the machine management method, the recommended phantom from each bone mineral density machine manufacturer was used to take 10~25 measurements to determine the standard amount and permitted limit. On each inspection day, measurements were taken everyday or at least three times per week to verify the whether or not change existed in the amount of actual bone mineral density. Also evaluations following Shewhart control chart and CUSUM control chart rules were made for the bone mineral density figures from the phantoms used for measurements. Various forms of management became necessary for machine installation and movement. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. There were two measurement methods followed: patients were either measured twice with 30 measurements or three times with 15 measurements. An important point to make regarding measurements is that after the first inspection and any other inspection following, the patient was required to come off the inspection table completely and then get back on for any further measurements. With a 95% confidence level, the precision error produced from the measurement bone mineral figures produced a precision error of 2.77 times the minimum of the biological bone mineral density change (Least significant change: LSC). In order to assure reliability in inspection, there needs to be good oversight of machine management and measurer for machine operation and inspection error. Accuracy error in machines needs to be reduced to under 1% for scientific development in bone mineral density machines.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.476-484
• /
• 2017

The purpose of this paper is to verify the structural integrity of a region with numerous penetration-holes in offshore structures such as semi-submersible rig and FPSO. In order to effectively check the yielding and buckling strength of plate members with penetration-holes, a screening analysis program was developed with the FE analysis tool to generate fine meshed model using the theoretical and analysis methods. When a hole is appeared in the plate structure members, the flow of stress is altered such that concentrations of stress form near the hole. Stress concentrations are of concern during both preliminary and detail design and need to be addressed from the perspectives of strength. To configure the geometrical shape, very fine meshed FE analysis is needed as the most accurate method. However, this method is practically impossible to apply for the strength verifications for all perforated plates. In this paper, screening analysis method was introduced to reduce analysis tasks prior to detailed FE analysis. This method is applied to not only the peak stress calculation combined stress concentration factor with nominal stress but also nominal equivalent stress calculation considering cutout effects. The areas investigated by very fine meshed analysis were to be chosen through screening analysis without any reinforcements for penetration-holes. If screening analysis results did not satisfy the acceptance criteria, direct FE analysis method as the 2nd step approach were applied with one of the coarse meshed model considering hole or with the very fine meshed model considering the hole shape and size. In order to effectively perform the local fine meshed analysis, automatic model generating program was developed based on the MSC/PATRAN which is pre-post FE analysis program. Buckling strength was also evaluated by Common Structure Rule (CSR) adopted by IACS as the stress obtained from very fine meshed FE analysis. Due to development of the screening analysis program and automatic FE modeling program, it was able to reduce the design periods and structural analysis costs.

• Journal of Sasang Constitutional Medicine
• /
• v.12 no.1
• /
• pp.48-62
• /
• 2000

Creativity is the most important characteristic and ability in the 21st century. Recently leading people in Korean society are aware of the significance of the enhancement of the creativity. However, Korean students are less likely to take initiative or depart from standard ways of thinking or doing things, because Korean Confucius culture puts an emphasis on collectivism. An individual has an obligation to conform in order to avoid conflict and maintain social harmony. The rule of respecting parents and teachers leads to a lack of self-expression and entails silence. Brainstorming technique developed by American Osbron, who originated the group brainstorming in 1953, is the most popular creative thinking method for the students. Brainstorming technique has two principles : ideation can be more productive if criticism is concurrently excluded; The more ideas the better. In doing BS, each panel should consist of chairperson, an assistant chairperson, recorder, and 10 others including 2-3 females. However there are several problems in doing group BS, such as production blocking, uniformity thinking, evaluation apprehension, and social loafing. This study was undertaken to investigate the proper way of forming Brainstorming groups with Korean students according to the Sasang Constitutional Medicine originated by Korean Lee Je-ma in 1894. Human beings are classified in four group in Sasang Constitutional Medicine : Taeyang-In, Teaum-In, Soyang-In and Soum-In. Two Yang-Ins are more self-expressive : Taeyang-In has very unique ides and thoughts; Soyang-In is very humorous and like to present his/her ideas. On the other hand, two Um-Ins are passive and are not likely to speak out their ideas in group. Therefore, in this investigation firstly, the brainstorming group was formed with two Yang-Ins (Taeyang-In and Soyang-In) and two Um-Ins(Taeum-In and Soum-In) separately and secondly, Yang-Ins and Um-Ins were mixed. And the first method was compared with the second method in terms of the degree of participation of the group members and finally the better grouping method to produce more and better ideas was discussed and suggested for the educational system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.2
• /
• pp.95-105
• /
• 2020

In order to promote efficient coastal management, it is important to continuously monitor the characteristics of the terrain, which are changed by various factors. In this study, time series UAV images were taken of Gyeokpo beach. And the standard deviation of ±11cm(X), ±10cm(Y), and ±15cm(Z) was obtained as a result of comparing with the VRS measurement performance for UAV position accuracy evaluation. Therefore, it was confirmed that the tolerance of the digital map work rule was satisfied. In addition, as a result of monitoring the erosion and sedimentation changes using the DSM(digital surface model) constructed through UAV images, an average of 0.01 m deposition occurred between June 2018 and December 2018, and in December 2018 and June 2019. It was analyzed that 0.03m of erosion occurred. Therefore, 0.02m of erosion occurred between June 2018 and June 2019. From the topographical change analysis results, the area of erosion and sediment height was analyzed, and the area of erosion and sedimentation was widely distributed in the ±0.5m section. If we continuously monitor the topographical changes in the coastal regions by using the 3D terrain modeling results using the time series UAV images presented in this study, we can support the coastal management tasks such as supplement or dredging of sand.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.4
• /
• pp.45-54
• /
• 2011

A simple model for reinforced concrete shear walls with boundary elements is proposed, which is a macro-model composed of spring elements representing flexure and shear behaviors. The flexural behaviour is represented by vertical springs at the wall ends, where the moment strength and rotational capacity of the wall are based on section analysis. The shear behaviour is represented by a horizontal spring at the wall center, where the key parameters for the shear behavior are based on the flexural behaviour since the shear walls with boundary elements are governed by the flexure. The proposed model was prepared with the results of hysteretic tests of the shear walls, and then the reliability of the hysteretic rule and variables was investigated by nonlinear dynamic analyses. Using parametric study with nonlinear dynamic analyses, the effect of the variables on demand and capacity, which are major parameters in seismic performance evaluation, are investigated. Results show that the measured and calculated shear forces versus the shear distortion relationships are slightly different, but the global response is well simulated. Furthermore, the demand and capacity are also changed in a similar way to the change in the major parameters so that the proposed model may be appropriate for reinforced concrete shear walls with boundary elements.

• Management & Information Systems Review
• /
• v.37 no.1
• /
• pp.41-53
• /
• 2018

This study validates the trading rules based market anomalies and technical analysis in the Korean stock market. For the analysis, we built decile portfolios on the basis of corporate characteristics factors that clearly demonstrate specific patterns of stock returns including the firm size, book-to-market equity, and accruals. This portfolio was used to develop a portfolio based on the moving average trading strategy which was used for popular technical analysis tools, and then that was evaluated using the Sharpe ratio. We also created a zero-cost portfolio to identify the profitability and success rate of the moving average trading strategy. We lastly sought to ensure a more robust evaluation by calculating the Sortino ratio of the portfolio based on the moving average trading strategy with various lags. Key findings from this validation are as follows. First, a smaller firm size, a higher book-to-market equity, and lower accruals led to larger average returns. Second, the risk-adjusted performance of the moving average trading strategy was the highest in terms of the firm size, followed by book-to-market equity and accruals. Third, the returns of the zero-cost portfolios all had a positive value, with its overall success rate hovering over 68.8%, demonstrating the successfulness of the moving average trading strategy. Fourth, various evaluations revealed the economic usefulness of our trading strategy that used market anomalies and technical analysis.