• Fire Science and Engineering
• /
• v.18 no.3
• /
• pp.30-38
• /
• 2004

An important characteristics during fire growth is the phenomena of flashover, which is the transition from the local combustion to the full-room fire. The aim of this study is to predict the flashover times, the ignition times and HRR(heat release rate) of flashover for building interior materials. By using the literature data and RSM(response surface methodology), the new equations for predicting the flashover time, the ignition time and the HRR of building interior materials are proposed. The A.A.P.E.(average absolute percent error) and the A.A.D.(average absolute deviation) of the reported and the calculated flashover times were 38.74sec and 51.24sec respectively, and the correlation coefficient was 0.975. The A.A.P.E and the A.A.D of the reported and the calculated ignition times were 10.96sec and 1.97sec, and the correlation coefficient was 0.962. Also the A.A.P.E and the A.A.D. of the reported and the calculated the HRR of flashover by means of times were 29.92 and 514, and the correlation coefficient was 0.830. The values calculated by the proposed equations were in good agreement with the literature data. Therefore, it is expected that this proposed equations will support the use of the research for other building interior materials.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.1
• /
• pp.24-36
• /
• 2003

The digital mobile communication will be developed till getting multimedia service in anyone, any where, any time. Theses requiring items are going to be come true via IMT-2000 system. Transmitting signal bandwidth of IMT-2000 system is 3 times as large as IS-95 system. That is mean peak to average of signal is higher than IS-95A system. So we have to design it carefully not to effect in adjacent channel. HPA(High Power Amplifier) located in the end point of system is operated in 1-㏈ compression point(Pl㏈), then it generates 3rd and 5th inter modulation signals. Theses signals affect at adjacent channel and RF signal is distorted by compressed signal which is operated near by Pl㏈ point. Then the most important design factor is how we make HPA having high linearity. Feedback, Pre-distorter and Feed-forward methods are presented to solve theses problems. Feed-forward of these methods is having excellent improving capacity, but composed with complex structure. Generally, Linearity and Efficiency in power amplifier operate in the contrary, then it is difficult for us to find optimal operating point. In this paper we applied algorithm which searches optimal point of linear characteristics, which is key in Power Amplifier, using minimum current point of error amplifier in 1st loop. And we made 2nd loop compose with new structure. We confirmed fabricated LPA is operated by having high linearity and minimum current condition with ACPR of -26 ㏈m max. @ 30㎑ BW in 3.515㎒ and ACLR of 48 ㏈c max@${\pm}$㎒ from 1W to 40W.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.362-370
• /
• 2001

In this paper, we proposed multispectral image compression method using CIP (classified inter-channel prediction) and SVQ (selective vector quantization) in wavelet domain. First, multispectral image is wavelet transformed and classified into one of three classes considering reflection characteristics of the subband with the lowest resolution. Then, for a reference channel which has the highest correlation and the same resolution with other channels, the variable VQ is performed in the classified intra-channel to remove spatial redundancy. For other channels, the CIP is performed to remove spectral redundancy. Finally, the prediction error is reduced by performing SVQ. Experiments are carried out on a multispectral image. The results show that the proposed method reduce the bit rate at higher reconstructed image quality and improve the compression efficiency compared to conventional methods. Index Terms-Multispectral image compression, wavelet transform, classfied inter-channel prediction, selective vetor quantization, subband with lowest resolution.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1833-1839
• /
• 2018

Objective: Incorporating high fibre ingredients into pig diets has the potential to reduce odour emissions from of pigs. The current study was carried out to determine effect of diets containing 0, 80 and 160 g/kg of each of lucerne hay, maize cobs and sunflower husks on the chemical characteristics and odours from pig slurries. Methods: Twenty eight pigs averaging $18{\pm}2.0kg$ were kept in individual cages, over four weeks. All pigs were fed ad libitum. Faeces and urine were collected, mixed in a 1:2.3 ratio (w/w), stored and fermented for 16 days in a temperature controlled room at $22^{\circ}C{\pm}2.3^{\circ}C$. The slurry was sampled twice (on day 1 and on day 16) of the fermentation period and analysed for pH, chemical oxygen demand (COD), nitrogen and short chain fatty acids (SCFA) concentration, on wet basis. All samples were tested for odour offensiveness using 18 panelists. A scale of 1 to 5 was used to rank the odour severity, (1 = not offensive, 5 = extremely offensive). Results: Slurry pH and COD varied with fibre source (p<0.05). On day 16, COD for lucerne hay, sunflower husk and maize cobs were 369, 512, and 425 (standard error of the mean = 34.2) mg of oxygen per litre. Total SCFA concentration was higher at day 16 than day 1 (p<0.05). Odour offensiveness varied with fibre source across both incubation periods (p<0.05). Sunflower husks and lucerne hay-based diets were rated as less offensive (mean rank = 2.2) than maize cob diets (mean rank of 4.3) (p<0.05). Conclusion: It was concluded that different fibre sources and incubation period influence chemical composition and odour of the slurry. There is, thereby, a need to incorporate locally available fibrous feeds in the diet of pigs because they have an economical and environmental relevance to pig management.

• Journal of Korean Academy of Nursing
• /
• v.31 no.2
• /
• pp.221-231
• /
• 2001

This study was conducted by analyzing all 33 articles based on the LISREL, published from January 1991 to March 1999 in Korea. The analyses consisted of the publication date of articles, principal dependent variables, subjects of the research, adequacy of sampling, adequacy of research purposes and results, accordance between theoretical model and hypothetical model, fit measures, theoretical base of model modification, and adequacy of conclusion. The results were as follows : . The thesis of 33 articles in total were outnumbered as 25 (75.8%) to 8 (24.2%) research articles. As for a sex classification of the subjects, 45.5% of the research were conducted around a female group of subjects, while 54.5% were done for both sex, The range of the sample size was 105 to 803, and the average was 259 subjects. . A single theoretical variable was measured for each measurement variable, any difference between variables was hardly found in 8 articles (24.2%), and 19 articles (57.6%) did not consider any measurement error. To analyze if the representative has been articles (21.2%) were seen with a sign of a representative. Questionnaires were used in a majority (31 articles) of the data collecting process. Only 2 articles (6.1%) were measured with a physiologic index simultaneously. . 14 articles (42.2%) were centered on theory development, 10 articles on theory synthesis, and 9 articles on theory test. The research purposes and results were consistent in 25 articles (75.5%) and 8 articles (24.2%) were inconsistent. The quality of life and health promotion behavior were the concepts most frequently studied as a dependent variable, and 7 articles centered on them. In applied theories a health promotion model was used on 4 articles (12.1%), while role theory and stress-coping models were in 3 articles respectively. . The articles were analyzed to see if the hypothetical model was elaborated and tested by the theoretical model. Twenty-five articles proved to be rationale for the inconsistencies. Also, 56.5% proposed hypotheses were supported among the subject articles, and 30 articles (90.0%) suggested a revised model. Path coefficient (17 articles) and theoretical adequacy (17 articles) were the standards mostly used. In conclusion, the principal factors were obtained from the research are to be considered as the principes of LISREL application. First, a model has to be established on a theoretical base rather than empirical results dependent on the data. The results are also required to be globally interpreted. Secondly, at least 200 samples are necessary to satisfy the need. Third, more than 3 measurement variables are to be adjusted to a single theoretical variable; the measurement errors must be suggested as well. Finally, normal distribution characteristics of the data and the estimation method need to be reported. Based on the research result, the follows are suggested; . Systematic criteria on the LISREL application and procedure need to be developed . Agreement form is required to report the results of research using the LISREL

• Journal of Korean Academy of Nursing
• /
• v.30 no.3
• /
• pp.549-559
• /
• 2000

The purpose of this study was to investigate the correlation between the knowledge and educational needs related to recurrent in coronary artery bypass graft patients as a basis to provide an individual nursing education for the population. The subjects consisted of 110 patients who had coronary artery bypass graft(CABG) at Asan Medical Center in Seoul and Sechong hospital in Buchon. Data was obtained from a knowledge questionnaire and a learning needs questionnaire between November 1998 and February 1999. Data were analyzed using SAS program for Wilcoxon rank sum test and Spearman correlation coefficient. The results were as follows : 1. With regard to the 18 items to measure knowledge, the mean (median) of items 'don't know' was 4.9(4) items. The mean (median) of items answered wrong was 3.2(3) items. The number of items answered 'don't know' tend to show higher in those who had less education, blue color jobs and myocardiac infarction history than in their counter parts. There were higher frequency of items answered 'don't know' in those who had no hypertension 2. With regard to the level of knowledge by questionnaire about CABG, The most "I dont know" (59.1%) highly response was 'He has to be treated with anticoagulant drug to prevent revasculized vessel from obstructing.' The seond highest response (56.4%) was 'If you were hypotensive, the coronary attack would collapse. 'During the hospitalized day, the patient has complete bedrest.' The highest error probability was cholesterol has not to intake.', 'After surgery, the sexual life is need controlled for 1 year. 3. The mean of educational needs was 3.38. With regard to the level of learning needs by sentence about CABG, 'Food that benefit heart disease', 'Recurrence possibility of heart disease', 'Management method of operation site', 'Risk symptom that visit hospital or report immediately' were higher than other sentenses. With regard to the level of learning needs by factor 'food(5 items)', 'disease(9 items)' and 'exercise(3 items)' showed the highest than other factors. The educational needs by patients characteristics tend to show higher in males, under the age of 49, middle or high school degree, previous experience of admission with coronary artery disease, history of myocardial infarction, expierience of PTCA, history of cerebro-vascular accident, previous expierience of smoking than in their counter parts. 4. The number of items answered 'don't know', wrong and correct weren't correlated with the level educational needs. As the results, the number of items answered 'don't know' tend to show higher in those who had less educated, blue color jobs and myocardiac infarction history than in their counter parts. There were higher frequency of items answered 'don't know' in those who had no hypertension .There were higher frequency of items answered 'don't know' on anti-thrombolitic theraphy, hypotension and pain relief. Also there were higher frequency of items answered wrong on bed rest period, cholesterol intake, and sexual life. Educational needs were higher in young age group, had previous experience of procesure and history of other disease. And when we educate CABG patients, education for diet, recurrence possibility of disease, management methods of operation site and risk symptom should be emphasized.

• Progress in Medical Physics
• /
• v.12 no.1
• /
• pp.71-77
• /
• 2001

The region, near the edge of a radiation beam, where the dose changes rapidly according to the distance from the beam axis is known as the penumbra. There is a sharp dose gradient zone even in megavoltage photon beams due to source size, collimator, lead alloy block, other accessories, and internal scatter ray. We investigate dosimetric characteristics on penumbra regions of a standard collimator and compare to those of theoritical model for the optimal use of the system in radiotherapy. Peripheral dose distribution of 6 W Photon beams represents penumbral forming function as the depth. Also we have discussed that the peripheral dose distribution of clinical photon beams, differences between calculation dose use of emperical penumbral forming function and measurements in penumbral region. Predictions by emperical penumbral forming functions are compared with measurements in 3-dimensional water phantom and it is shown that the method is capable of reproduceing the measured peripheral dose values usually to within the statistical uncertainties of the data. The semiconductor detector and ion chamber were positioned at a dmax depth, 5cm depth, 10cm depth, and its specific ratio was determined using a scanning data. The effective penumbra, the distance from 80% to 20% isodose lines were analyzed as a function of the distance. The extent of penumbra will also expand with depth increase. Difference of measurement value and model functions value according to character of the detector show small error in dose distribution of the peripheral dose.

• Journal of Korea Water Resources Association
• /
• v.41 no.9
• /
• pp.959-967
• /
• 2008

Disaggregation techniques are widely used to transform observed daily rainfall values into hourly ones, which serve as important inputs for flood forecasting purposes. However, an important limitation with most of the existing disaggregation techniques is that they treat the rainfall process as a realization of a stochastic process, thus raising questions on the lack of connection between the structure of the models on one hand and the underlying physics of the rainfall process on the other. The present study introduces a nonlinear deterministic (and specifically chaotic) framework to study the dynamic characteristics of rainfall distributions across different temporal scales (i.e. weights between scales), and thus the possibility of rainfall disaggregation. Rainfall data from the Seoul station (recorded by the Korea Meteorological Administration) are considered for the present investigation, and weights between only successively doubled resolutions (i.e., 24-hr to 12-hr, 12-hr to 6-hr, 6-hr to 3-hr) are analyzed. The correlation dimension method is employed to investigate the presence of chaotic behavior in the time series of weights, and a local approximation technique is employed for rainfall disaggregation. The results indicate the presence of chaotic behavior in the dynamics of weights between the successively doubled scales studied. The modeled (disaggregated) rainfall values are found to be in good agreement with the observed ones in their overall matching (e.g. correlation coefficient and low mean square error). While the general trend (rainfall amount and time of occurrence) is clearly captured, an underestimation of the maximum values are found.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1032-1041
• /
• 2007

The global navigation satellite system (GNSS), which is the core technique for the location based service, adopts the direct sequence/spread spectrum (DS/SS) as its modulation method. The success of a DS/SS system depends on the synchronization between the received and locally generated pseudo noise (PN) signals. As a step in the synchronization process, the tacking scheme performs fine adjustment to bring the phase difference between the two PN signals to zero. The most widely used tracking scheme is the delay locked loop with early minus late discriminator (EL-DLL). In the ideal case, the EL-DLL is the best estimator among various DLL. However, in the band-limited multipath environment, the EL-DLL has tracking bias. In this paper, the timing offset range of correlation function is divided into advanced offset range (AOR) and delayed offset range (DOR) centering around the correct synchronization time point. The tracking bias results from the following two reasons: symmetry distortion between correlation values in AOR and DOR, and mismatch between the time point corresponding to the maximum correlation value and the synchronization time point. The former and latter are named as the type I and type II tracking bias, respectively. In this paper, when the receiver has finite bandwidth in the presence of multipath signals, it is shown that the type II tracking bias becomes a more dominant error factor than the type I tracking bias, and the correlation values in AOR are not almost changed. Exploiting these characteristics, we propose a novel tracking bias mitigation scheme and demonstrate that the tracking accuracy of the proposed scheme is higher than that of the conventional scheme, both in the presence and absence of noise.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.644-649
• /
• 2017

In the automobile industry, there is growing demand for lightweight vehicles due to environmental problems and rising oil prices. Therefore, aluminum alloys and special materials are being used to reduce the weight of vehicles, but there are still many difficulties to overcome in terms of cost and strength. Therefore, the application of advanced high strength steel (AHSS)is increasing. AHSS has good strength and formability.Safety regulations are becoming stricter, and 1.2-GPa super-high-strength steels are gradually being applied for the center pillar and roof rails. Thus, the application of different kinds of steels in automobile bodiesis also increasing gradually. This study evaluates the resistance point weldability and the characteristics of a welded part of SGAFC1180 1.2t steel. A simulation was used to observe the nugget formation and its growth behavior. The prediction performance showed a similar tendency within an error rate of 10%. Also, the effect of this behavior on the process resistance and dynamic resistance was investigated,along with the correlation between the shear tensile strength and nugget diameter.