• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.171-173
• /
• 1997

This paper presents analysis of the radial force density in brushless DC motor of which distribution is not uniform in the axial direction. The analysis considering 3D shape of teeth and overhang is not only important but essential to calculate the radial force density that acts on the teeth of stator, because it is frequent source of vibration and changes at the end of teeth. For the analysis, a new 3D equivalent magnetic circuit network method taking into account movement of the rotor without remesh is proposed. The radial force density is calculated by Maxwell stress tensor and analyzed by discrete Fourier transform.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.876-878
• /
• 2000

In this paper, the characteristic of the Linear DC motor(LDM) are analyzed by using 3 Dimensional Equivalent Magnetic Circuit Network (3D EMCN), the movement of mover substitutes for the movement of magnetization in permanent magnet expressed by Fourier series, thrust characteristic analysis is performed and the appropriateness of analysed result is verified by comparing with the results of 2 Dimensional Finite Element Method (2D FEM) and experiment.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.233-240
• /
• 2002

In this paper, the effects of vehicle loads on flat slab system are investigated on the basis of the previous studies for beam-girder parking structural system. The influence surfaces of flat slab for typical design section are developed for the purpose of obtaining maximum member forces under vehicle loads. In addition, the equivalent vehicle load factors for flat slab parking structures are suggested using artificial neural network. The network responses are compared with the results by numerical analyses to verify the validation of Levenberg-Marquardt algorithm adopted as training method in this paper. Many parameter studies fur the flat slab structural system show dominant vehicle load effects at the center positive moments in both column and middle strips, like the beam-girder parking structural system.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.3
• /
• pp.138-144
• /
• 2000

The detent force caused by the interaction of magnets with the teeth of a armature core deteriorates the driving performance of a permanent magnet linear synchronous motor. In this paper, we analyze the fields and forces of a linear synchronous motor with segmented or skewed magnet arrangement according to lateral overhang length of permanent magnets. For the analysis, the 3-dimensional equivalent magnetic circuit network method is used. The detent force and the static thrust are analyzed according to the segmented or skewed angle and the overhang length of permanent magnets, and the optimal angles that the detent force is minimized are found out in each case. The analysis results are compared with the experimental ones and shown a reasonable agreement.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.32-35
• /
• 1996

This paper analyzes characteristics of PMLSM using 3 dimensional equivalent magnetic circuit network method (3-D EMC). PMLSM of which the effective electric-airgap is not only very large, but also the width is finite width lateral edges has much leakage flux. Therefore, 2-D analysis method cannot consider it so carefully that 3-D analysis method must required. 3-D EMC which will be used for analysis of PMLSM performs modeling of it including solt and teeth structure, uses the magnetic motive force of stator winding and permanent magnet as source. and calculates magnetic flux density and force considering nonlinear characteristics of materials. we verified analysis validity by comparing simulation results with expermental results.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.271-273
• /
• 2000

This paper presents the dynamic characteristics Linear DC Motor(LDM) using 3 Dimensional Equivalent Magnetic Circuit Network Method(3-D EMCN) by voltage driven. The movement of mover substitutes for the movement of magnetization in permanent magnet expressed by Fourier series. The Dynamic characteristics are carried out from coupling the electrical circuit equation and mechanical kinetic equation.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.125-127
• /
• 2001

Switched reluctance motor (SRM) has some advantages such as low cost, high torque density etc. However SRM has inevitably high torque ripple due to the double salient structure. To apply SRM to industrial field, we have to minimize torque ripple, which is the weak-Point of SRM. This paper presents optimal design process of SRM using numerical method such as 2D finite element method (FEM) and 3D equivalent magnetic circuit network method (EMCNM). The electrical and geometrical design parameters have been adopted as 2D design variables. The overhang structure of rotor has been also adopted as 3D design variable. From this work, we can obtain the optimal design, which minimize the torque ripple and maximize energy conversion loop.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.131-133
• /
• 2001

2D analysis is impossible for Hybrid stepping motor(HSM) and 3D analysis is necessary because the permanent magnet is magnetized to the axial direction. In this paper, the characteristics of HSM are analyzed by using 3D equivalent magnetic circuit network method(3D EMCNM). In addition, the trapezoidal element is introduced for the exact permeance calculation in the complex shape machinery such as HSM. The magnetic saturation of core is considered.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.223-227
• /
• 2021

A treatment based on the algebraic operations on fuzzy numbers is used to replace the fuzzy problem into an equivalent crisp one. The finite difference technique is used to replace the continuous boundary value problem (BVP) of arbitrary order 1<α≤2, with fuzzy boundary parameters into an equivalent crisp (algebraic or differential) system. Three numerical examples with different behaviors are considered to illustrate the treatment of the singular perturbed case with different fractional orders of the BVP (α=1.8, α=1.9) as well as the classical second order (α=2). The calculated fuzzy solutions are compared with the crisp solutions of the singular perturbed BVP using triangular membership function (r-cut representation in parametric form) for different values of the singular perturbed parameter (ε=0.8, ε=0.9, ε=1.0). Results are illustrated graphically for the different values of the included parameters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.1005-1010
• /
• 2004

An analysis method of slot-coupled microstripline to waveguide transition is presented to developed a simple but accurate equivalent circuit model. The equivalent circuit consists of an ideal transformer, microstrip open stub, and admittance elements looking into a waveguide and a half space of feed side from a slot center. The related circuit element values are calculated by applying the reciprocity theorem, the Fourier transform and series representation, the complex power concept, and the spectral-domain immittance approach. The computed scattering parameters are compared with the measured, and good agreement validates the simplicity and accuracy of the proposed equivalent circuit model.