• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.662-666
• /
• 2005

Using data gathered from expert opinion of plant and equipment professionals; this paper presents the key variables that may constitute a maintenance proficient plant operator. The Multivariate Discriminant Analysis (MDA) was applied to generate data and was tested for sensitivity analysis. Results showed that the MDA model was able to classify plant operators' proficiency at 94.10 percent accuracy and determined nine (9) key variables of a maintenance proficient plant operator. The key variables included: i) number of years of experience as equipment operator (PQ1); ii) eye-hand coordination (PQ9); iii) eye-hand-foot coordination (PQ10); iv) planning skills (TE16); v) pay/wage (MQ1); vi) work satisfaction (MQ4); vii) operator responsibilities as defined by management (MF1); viii) clear management policies (MF4); and ix) management pay scheme (MF5). The classification procedure of nine variables formed the general model with the equation viz: OMP (general) = 0.516PQ1 + 0.309PQ9 + 0.557PQ10 + 0.831TE16 + 0.8MQ1 + 0.0216MQ4 + 0.136MF1 + 0.28MF4 + 0.332MF5 - 4.387

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.188-191
• /
• 2002

This paper concerns 3-D graphical modeling and simulation techniques for design and control of automated equipment for construction and facility maintenance. A case study on the use of 3-D graphics techniques for developing a power plant maintenance robot is presented. By simulating equipment operation within the 3-D geometry models of the work environment the environment design was improved. The 3-D graphical models of the equipment and the work environment were further utilized for the control of the robot from a remote distance. By presenting the real-time updated equipment configuration and the work environment to the operator, the graphical model-based equipment control system helped the operator overcome the problems associated with spatial perception. The collision between the robot and the plant structures was also avoided based the real-time analysis of the dynamically updated graphical models.

• Safety and Health at Work
• /
• 제8권2호
• /
• pp.226-230
• /
• 2017

The performance of sound barriers was evaluated to determine their technical effectiveness and practicality in reducing noise exposures to operating engineers in construction. Commercially purchased sound dampening mats (SDMats) were installed inside three heavy-equipment engine compartments. Sound pressure levels (SPLs) were measured before and after installing the SDMats while the equipment was on idle and full-throttle settings where it normally operates. SPLs inside the heavy-equipment operator cabs were significantly reduced by 5.6-7.6 dBA on the full-throttle setting following installation of the SDMats (p < 0.01). The evaluated engineering control intervention was simple to install, affordable, and substantially reduced the engine noise reaching the heavy-equipment operator, potentially reducing reliance on hearing-protection devices to protect construction workers from noise exposures.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권4호
• /
• pp.493-499
• /
• 2016

C-arm장비의 사용 시 시술자의 산란선에 의한 피폭선량을 확인하여 적절하고 효율적인 피폭선량 저 감화 방법을 알아보기 위해 본 연구를 진행하였다. Over Tube 방식에 비해 피폭선량이 적다는 Under Tube 방식의 C-arm 장비를 활용하여 연구한 결과 차폐도구가 두꺼울수록 시술자의 피폭선량은 감소하였고, 중심선에서 멀어질수록 피폭선량이 감소하였고, 조사시간이 길어질수록 피폭선량이 증가하였고, 세 곳의 선량계 부착위치 중 생식선에서 가장 많은 피폭선량이 측정되었고 흉부, 갑상선 순이었다. 그러나 실제 시술 중 피폭선량을 줄이기 위해 거리를 무한정 늘릴 수 없고, 조사시간을 무한정 단축시킬 수 없기 때문에 인위적으로 조절 가능한 차폐 두께를 달리하는 방법으로 시술자의 피폭선량을 감소시킬 수 있었다. C-arm장비를 사용할 경우 시술 중 불편하다는 이유로 방사선 차폐에 소홀히 하고 근접시술이 이루어지기 때문에 피폭량은 증가할 수밖에 없다. 이에 C-Arm장비의 특성상 조정실을 구비할 수 없으므로 Apron 등의 방사선 차폐도구의 적정두께 사용 등으로 시술 중 발생되는 방사선에 의한 시술자의 피폭선량을 경감시켜야 할 것으로 사료된다.

• 한국정보통신학회논문지
• /
• 제25권1호
• /
• pp.108-114
• /
• 2021

무인 항공기 탑재장비 점검을 위한 통합 점검 장치는 항공기가 임무 수행을 위해 비행 전, 그리고 비행 임무를 완료하고 착륙 이후 항공기에 탑재되어 있는 장비들의 상태를 점검하기 위한 장치이다. 본 논문에서는 무인 항공기에 탑재되어 있는 전자장비에 대하여 점검자가 수동으로 장비의 상태를 점검하고, 점검 결과를 시현하는 방법과 점검자의 개입 없이 자동으로 장비의 상태를 점검할 수 있는 자동 점검 기술에 대해 기술하였다. 또한 설계된 통합 점검 장치는 점검 결과를 보고서의 형태로 출력하여 사용자가 쉽게 결과를 확인 할 수 있도록 하여 무인항공기의 고장 유무를 판단하기 용이할 뿐 아니라, 자동 점검 기능을 사용함으로써 항공기 점검자의 업무량을 줄이는데 효과적인 방법이다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.187-201
• /
• 2009

Semiconductor industry is based on equipment industry and timing industry. In particular, semiconductor process is very complex and as semiconductor-chip width tails and is becoming equipment gradually more as a high technology. Equipment operation is primarily engaged in semiconductor manufacturing (engineers and operator) of being conducted by, equipment errors have also been raised. Equipment operational data related to the error of korea occupational safety and health agency were based on data and production engineers involved in the operator's questionnaire was drawn through the error factor. Equipment operating in the error factor of 9 big item and 36 detail item detailed argument based on the errors down, and 9 big item the equipment during operation of the correlation error factor was conducted. Each of the significance level was correlated with the tabulation and analysis. Using the maximum correlation coefficient, the correlation between the error factors to derive the relationship between factors were analyzed. Facility operating with the analysis of error factors (big and detail item) derive a relationship between the model saw. The end of the operation of the facility in operation on the part of the two factors appeared as prevention. Safety aspects and ergonomics aspects of the approach should be guided to the conclusion.

• 디지털산업정보학회논문지
• /
• 제8권3호
• /
• pp.87-95
• /
• 2012

Up to now, industrial cranes play important roles as the effective machines to carry heavy loads in the manufacturing premise, in the construction field and so on. And, a crane is widely used not only to daily work but also to carry heavy materials efficiently in a construction site for prevention of accident. However, the crane operation is highly complicated even for experts. In this paper, we developed the content of the crane mounted on the controller. This content overload conditions in the operating environment for the crane operator to warn, and the operation of equipment has the capability to limit automatically. The content for crane controller is to alert the operator overload and to limit the operation of equipment for stabilizing capabilities. The content of the flexible algorithm is based on stabilizing controllers, PLC (Programmable Logic Controller) to connect for using the equipment and electrical control systems to ensure the safety of workers and to improve the ability to work possible.

• 한국항해항만학회지
• /
• 제40권5호
• /
• pp.249-256
• /
• 2016

The International Association of Marine Aids to Navigation and Lighthouse Authorities(IALA) model course recommends specific aspects of basic curriculums for Vessel Traffic Services(VTS) operator education such as modules, course hours, contents, etc. Most domestic training programs for newly appointed VTS operators comply with such recommendations. The objective of this study is to determine whether such modules for VTS operator training recommended by the current IALA model course correspond to the actual opinions of VTS operators who are currently working in the field. To this end, the relative importance of basic modules for vessel traffic services operator training was analyzed using the Analytic Hierarchy Process(AHP) method. A questionnaire was designed to include 8 modules recommended by the IALA model course, and the survey results of 52 individuals working at 5 VTS centers were analyzed. The result showed that, unlike the assumption by the IALA, domestic VTS operators viewed Nautical Knowledge as the most important modules, followed by Emergency Situations, Traffic Management, Language, Equipment, VHF Radio, Communication Co-ordination, and Personal Attributes, in that order.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.42-49
• /
• 2018

Pilot Aptitude Research Equipment (PARE) is a simulator developed to measure or research pilot aptitude and train for student pilots. Design of an ergonomic PARE operation console is required to operate the equipment effectively. This study carried out five steps : (S1) operator questionnaire survey, (S2) anthropometric design formula development, (S3) usability evaluation, (S4) improvement design, and (S5) validation considering both Physical User Interface (PUI) and Graphic User Interface (GUI) of PARE operation console. The operator questionnaire surveyed needs for each PUI and GUI part of the console from two PARE actual operators. In terms of PUI, the anthropometric design formula was developed by using design variables, body dimensions, target population characteristics, and reference posture related to the PARE console. In terms of GUI, the usability evaluation was conducted by three usability testing experts with a 7-point scale (1 : very low, 4 : neutral, 7 : very high) on GUI of the PARE operation console by seven usability criteria. The improved PARE operation console was designed to reflect the optimal values of design variables calculated from design formula, the results from usability testing, and the operator's needs. The improvement effect was observed by 20 people who had experience with the PARE operation console. As a result of the validation, monitor visibility and cockpit visibility for the improved PUI design and visibility and efficiency for the improved GUI design were significantly increased by more than 90% respectively. The improved design of the PARE operation console in this study can contribute to enhance operation performance of the PARE.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.242-244
• /
• 2017

Excavation for construction is implemented in natural geographical terrain using a variety of construction equipment. Therefore, 3D excavation simulation requires integration of geographical and equipment modeling. This paper proposes a technique that integrates geographical and equipment modeling for 3D simulations of construction excavation. The geographical model uses a digital map to show ground surface changes during excavation and the equipment model shows equipment movement and placement. This combination produced a state of the art 3D simulation environment that can be used for machine guidance. An equipment operator can use the 3D excavation simulation to help construction equipment operators with decisions during excavation work and consequently improve productivity.