• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.146-153
• /
• 2003

This paper deals with the stress singularity induced at the interface corner between the viscoelastic thin film and the rigid substrate subjected to the combined influence of temperature change and moisture absorption. A boundary element analysis is employed to investigate the behavior of interface stresses. The film is assumed to be thermorheologically simple. It is further assumed that moisture effects are analogous to thermal effects. Numerical results are presented for a given viscoelastic model, indicating the singular residual stresses induced during cooling down from the curing temperature, and how they can be altered by subsequent moisture absorption at room temperature.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.126-133
• /
• 2008

Computer and communication of based IT technology use to das that remote control, monitoring, measuring automatic gas switch, recloser located far about $20{\sim}30[km]$. For increasing efficiency billing, metering of high voltage customer use to amr system. If between das and amr interface operate when generated fault in high voltage electric equipment of customer part, amr system serve to das quickly in fault information data, correct fault location.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.928-934
• /
• 2010

In this paper, the method introduce for touching signals and run the application on the multi touch environment using infrared light. When the user touches the screen, the infrared camera make a movie the light and the light which made through image processing communicate from TUIO(Tangble User Interface Object) protocol to Application. this Program is using the delivery informations which are occurred the event to Application. The Application which use the touch can exchange the Andoroid Phone between Mobile picture supervision Application also this equipment introduces about the musical entertainment Application which play a music many users at the same time.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.108-114
• /
• 2008

The aim of this analysis is to verify the electrical compatibility of the interfaces which exist between TWTA(Travelling Wave Tube Amplifier) which is equipment of the Ka-band payload in COMS (Communication, Ocean and Meteorological Satellite) and external equipments. For each interface, this study checked the compatibility between equipments for the power links, commands, digital telemetry, analog telemetry, and failure condition or AIT(Assembly, Integration and Test) errors. In addition with this interface compatibility verification, this study outputs electrical and manufacturing recommendations to be applied at harness level.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.115-125
• /
• 2000

In this paper, we suggest the basic components of monitoring system for the semiconductor wafer cleaning equipment and a monitoring system model based on these components. Basic component is defined as a mandatory function which consists of communication with the control system, user interface, communication with the remote monitoring system, management of monitoring data and inter-task communication. We have defined the function of each component and the relation among them, and designed each component as a task. To evaluate the validity of the suggested model, we have implemented the basic components using the Visual C++ on Windows NT and applied them to the Monitoring System for the semiconductor wafer cleaning equipment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1205-1211
• /
• 2017

The Propulsion System Test Complex(PSTC) was constructed for the verification test of each stage's propulsion system of KSLV-II. Main Control System(MCS) is the system to operate the onboard equipment and the ground equipment of the PSTC simultaneously. This paper describes the critical design, the development status, and test results of Main Control System. The MCS will be used for the interface connection between ground control systems and onboard equipment. Test sequence and operation process of the Work Manager will be conducted by MCS.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.126-130
• /
• 2021

The ball grid array is one of the packaging methods that used in high density printed circuit board. Solder void defects caused by voids in the solder ball during the BGA process do not directly affect the reliability of the product, but it may accelerate the aging of the device on the PCB layer or interface surface depending on its size or location. Void inspection is important because it is related in yields with products. The most important process in the optical inspection of solder void is the segmentation process of solder and void. However, there are several segmentation algorithms for the vision inspection, it is impossible to inspect all of images ideally. When X-Ray images with poor contrast and high level of noise become difficult to perform image processing for vision inspection in terms of software programming. This paper suggests the solution to deal with the suggested problem by means of using Mask R-CNN instead of digital image processing algorithm. Mask R-CNN model can be trained with images pre-processed to increase contrast or alleviate noises. With this process, it provides more efficient system about complex object segmentation than conventional system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.410-415
• /
• 2002

This paper describes the implementation of a SoC(System-on-a-Chip) and an ISDN communication terminal by the SoC in ISDN network. The SoC has been developed with the functions of 32-bit ARM7TDMI RISC core processor, network connection with S/T interface, TDM--bus interface and voice codec, user interface. And we also review the developed software structure and the ISDN service protocol procedures which are working on the SoC. And finally this paper describers a structure of an ISDN terminal equipment using the implemented SoC and terminal software.

• IE interfaces
• /
• v.17 no.spc
• /
• pp.37-45
• /
• 2004

Human factors engineering design guidelines for main control rooms(MCR) in nuclear power plants(NPP) have been applied to optimize human-machine interface(HMI) between operators and their equipment on the basis of physical, physiological and cognitive aspects. However, the HMI design for MCR is not found to be sufficient to maximize operators' performance since the operators in the MCR experience excessive stress due to the environmental factors such as inappropriate interiors and illumination. Therefore, well-designed environment of the MCR may be equally important to improve human performance in the MCR. The objectives of the study are two-fold: (1) to propose an interior design of SHIN-KORI 1 2 for pleasant and comfortable working environments, and (2) to design indirect lighting system to enhance visibility and productivity. The human factors engineering checklists were developed to examine whether or not the proposed human-environment design for SHIN-KORI 1 2 satisfies the regulations and guidelines presented by NUREG-0700 Revision 1. The implications of the human-environment design are discussed in detail.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3133-3138
• /
• 1997

The Digital Broadcasting Satallite System consists of the Transmitter station, the Resource and Subscriber Management System, and the Receiver Test Unit. The RSMS consists or several modules such as Resource Main Module, Resource User Interface Module, Transmitter Station Interface Module, Receiver Test Unit Interface Module, Subscriber sales Outlets Module and Monitor & Control Module. In this paper we suppose the new RRMC Algorithms that is to manage efficiently the Resource and subscriber information in the Direct Broadcasting Satellite system based on client-sever features and demonstrates the implementation method of monitoring and control the system in real time. Also we explain the communication procedure between resource and subscriber managment and other equipment.