• Korean Journal of Medicinal Crop Science
• /
• v.16 no.1
• /
• pp.33-38
• /
• 2008

This study was carried out to reduce the number of chemical treatment by optimal apply for the disease and pest and obtain the basal data of environmental-friendly cultivation in Panax ginseng in 2006. The result by checking disease Incidence and pests fried in ginseng field of jeollabuk-Do was as follows. The kind of disease occurred in Jinan was 8 including Rhizoctonia solani, 7 with Botrytis cinerea in Jeongeup, and also 6 with Botrytis cinerea in Kochang within Jeollabuk-Do. It was required thorough disease control before the rainy season because the occurrence time was peaked around July. Also, the most serious disease in Jeollabuk-Do was Alternaria alternata, Botrytis cinerera, and Colletotrichum gloeosporioides. The actual harmful pests in ginseng field were Asusta despecta steboldiana and Holotrichia sp. and in other method using black light trap, Maladera orientalis, Ostrinia furnacalis, and Holotrichia morosa were mainly trapped.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.67-74
• /
• 2016

The demand of environmental friendly packaging materials such as pulp mold has been increased. The application of the oil palm biomass, EFB (Empty Fruit Bunch) fiber as natural raw materials to the pulp mold could increase the usability of the pulp mold by the reduced production cost brought from the relatively low cost of EFB. The effects of the EFB(Empty Fruit Bunch) fibers on the properties of pulp mold and on the process efficiency were evaluated in this study. The pulp mold samples were prepared with mixture ONP (Old news paper) and EFB by using laboratory wet pulp molder. The changes in the drying efficiency were measured with the changes in the solid contents of pulp mold samples during drying process. The efficiency of the surface coating treatment on the pulp mold depending on the condition of the pulp mold samples were also evaluated in order to improve the water resistance properties of pulp mold. The addition of EFB increased the drying efficiency by providing the bulkier structure and the higher water contact angle, which indicated the better water resistance properties. The water resistance were improved by the surface coating treatments and the application of surface coating on the pulp mold at the higher moisture contents resulted in the higher improvement in the water resistance. The bulkier structure originated from the application of EFB fiber reduced the effects of the surface coating, which could be overcome by the control of surface coating process.

• Explosives and Blasting
• /
• v.30 no.1
• /
• pp.17-28
• /
• 2012

Building demolitions at urban area make some inconvenience to neighborhood through generating noises, ground vibrations, and dusts. For this reason, various methods to control such environmental impacts have been being designed and practiced. Among the methods, the use of explosive demolition is rapidly increasing because it can minimize the inconveniency as well as decrease the working time and cost. In this respect, the old Sung-Nam city hall, which was a Rahmen structure comprised of beams, slabs and columns, was decided to be demolished by explosive demolition. This paper shows that explosive demolition can be the most suitable way of removing old buildings eco-friendly, safely, and economically by showing the observation results obtained from the actual demolition operation for the Sung-Nam city hall.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2003.05a
• /
• pp.413-425
• /
• 2003

Information Technology is the kernel technology deciding the industrial standard of one nation, and biotechnology will be the main technology of next generation. Based on this fact, a lot of efforts were made to industrialize them. Nano Technology is beginning to position itself as the kernel fusion technology, and its usage and popularity is expanding. Environmental and Energy Technology is a must-have strategic technology considering the increase demand of new energy development, the international environment correspondence, the environment-friendly production, and so forth. Space Technology is the field, which will contribute to raise the domestic component and system technology to the next level. In 2001, new technology research development costs total of 1 trillion 32 billion won in the following fields; 437.82 billion won in IT, 88.457 billion won in BT, 46.799 billion won in NT, 315.682 billion won in ET, and 112 billion won in ST. from component ratio, IT forms 42% which is the most, 31% for ET and in order of BT, ST and NT. ETRI and KISTI are concentrating on IT, KIBB is on BT, KAERI, KIER, KERI and KBSI are focusing on ET, and KIMM, KRISS, KRICT and KORDI is participating together in 4∼5 new technology such as IT, BT, NT and ET. Funds for research development costs in 5 new technology fields of 13 contribution (year) are consisted as follows; The Office for Government Policy Coordination has contributed 131 billion won (13%), 387 billion won (37%) by MOST, 256 billion won (25%) by Ministry of Information and Communication, 67 billion won (6%) by Ministry of Commerce, Industry and Energy, 19% by others and the industrial world. < Strategy for Technology Advancing > o Promotion of comprehensive contributing (year) new technology development research plan project o Increase research efficiency by promoting new technology development project connected with peculiar projects of organization by contribution (year) o Formation of superior research group by technology and introduction of operation system for research accumulation are needed. o Technology demand-oriented assignment deduction and promotion of research development project connected with intermediate long term objective o National will and investment extension of research development costs, training and popularization of professionals, commercialization promotion with efficient control for research plan and result.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.512-521
• /
• 2015

In this research, environmental friendly organic acid containing microetching system to improve adhesion strength between photoresist resin and Copper Clad Laminate(CCL) was developed without using strong oxidant $H_2O_2$. Etching rate and surface contamination on CCL were examined with various etching conditions with different etchants, organic acids and additives. to develope an optimum microetching condition. Etching solution with 0.04 M acetic acid showed the highest etching rate $0.4{\mu}m/min$. Etching solution with the higher concentration of APS showed the higher etching rate but surface contamination on CCL is very serious. In addition, stabilizer solution also played an important role to control the surface contamination. As a result of research, the etching solution containing 0.04 M of acetic acid, 0.1 M of APS with 4 g/L of stabilizer solution(ST-1) was best to improve adhesion between CCL and photoresist resin as well as showed the most clean and rough surface with the etching rate of $0.37{\mu}m/min$.

• Journal of Aquaculture
• /
• v.11 no.2
• /
• pp.223-230
• /
• 1998

This study was carried out for the purpose of developing environmental friendly and effective chemical treatment method for the disease control in the land-based flounder culture which is industrially popular in the coastal area in Korean. The chemicals such as flounder, Paralichthys olivaceus and their effects on the fish based on the 24hr-$LC_{50}$, $LT_{50}$, 24-hour survival rate at each experimental concentration, recovery rate of the survived individual from chemical treatment, and the histological change of the gill after chemical treatment were investigated and analyzed. The 24hr-$LC_{50}$ was 321.65 ppm for formalin, 419.62 ppm for chlorine dioxide, and 395.97 ppm for hydrogen peroxide, respectively. The $LT_{50}$ was 15-hour for formalin, 17-hour for chlorine dioxide and 24-hour for hydrogen peroxide, respectively. Fishes exposed to the experimental concentration of three chemicals were quickly susceptible in the order of formalin, chlorine dioxide and hydrogen peroxide with a trend of shorter half lethal time at higher concentration. Initial survival rate of the flounder soon after chemical treatment was the highest in the hydrogen peroxide treatment compared with the other two chemicals. The histological damage by the hydrogen peroxide treatment was negligible compared with the other two chemicals. Accordingly, hydrogen peroxide treatment showed the lowest toxicity compared with the other two chemicals to the experimental fishes.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.27-33
• /
• 2014

This paper presents a brief summary on a relatively new plasma aided electrolytic surface treatment process for light metals. A brief discussion regarding the advantages, principle, process parameters and applications of this process is discussed. The process owes its origin to Sluginov who discovered an arc discharge phenomenon in electrolysis in 1880. A similar process was studied and developed by Markov and coworkers in 1970s who successfully deposited an oxide film on aluminium. Several investigation thereafter lead to the establishment of suitable process parameters for deposition of a crystalline oxide film of more than $100{\mu}m$ thickness on the surface of light metals such as aluminium, titanium and magnesium. This process nowadays goes by several names such as plasma electrolytic oxidation (PEO), micro-arc oxidation (MOA), anodic spark deposition (ASD) etc. Several startups and surface treatment companies have taken up the process and deployed it successfully in a range of products, from military grade rifles to common off road sprockets. However, there are certain limitations to this technology such as the formation of an outer porous oxide layer, especially in case of magnesium which displays a Piling Bedworth ratio of less than one and thus an inherent non protective oxide. This can be treated further but adds to the cost of the process. Overall, it can be said the PEO process offers a better solution than the conventional coating processes. It offers advantages considering the fact that he electrolyte used in PEO process is environmental friendly and the temperature control is not as strict as in case of other surface treatment processes.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.71-77
• /
• 2010

Mg alloys have been used in automobile industry, aerospace, mobile phone and computer parts owing to low density. However, they have a restricted application because of low mechanical and poor corrosion properties. Thus, improved surface treatments are required to produce protective films. Environmental friendly Plasma Electrolytic Oxidation(PEO) was used to produce protective films on magnesium alloys. PEO process is combined electrochemical oxidation with plasma treatment in the aqueous solution. In this study, the effects of applied voltage and applied current on the surface morphologies were investigated. Also, the effects of Direct Current(DC) and Pulse Current(PC) were compared. PC and constant current control gave the dense coating on the Mg alloy. The potentiodynamic polarization tests were carried out for the analysis of corrosion properties of specimens. The surface hardness was 5 times higher than that of untreated AZ91D.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1792-1797
• /
• 2013

Recently, due to the excessive use of fossil fuels, many studies about the fossil fuels such as solar and fuel cell energy source are progressing. Fuel cell system has high energy conversion efficiency. Also, fuel cell system is environmentally friendly system because the carbon emission is almost not occur. Therefore, the fuel cell system is considered as the core technology of in the fields of the future energy and environmental. Fuel cell system has an effect on distribution power system because another power source of other than large power plants. So, fuel cell system can be reason of power quality in the power system. In this paper, we constructed the system for an assessment on Islanding. The system is composed with power source, Impedance coordination load and linear load, fuel cell system. we are performed assessment on voltage and power quality in customer and the distributed power system during the Islanding of residential fuel cell system. In addition, no change in the impedance of power system, we made a islanding condition only using the actual load, As a variation of generation and load current under islanding, an analysis results based on assessment system showed that the power qualities of distribution system became more aggravation as effect of voltage sag and voltage swell phenomena.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.1
• /
• pp.22-28
• /
• 2004

Livestock industry requires alternatives of antibiotics to prevent environmental pollution and to maintain public health. We herein report on an effective method to reduce ammonia from livestock manure, and confirmed environmentally-friendly livestock production by adding three types of yeast probiotics, Pichia farinosa SKM-1, Pichia anomala SKM-T, and Galactomyces geotrichum SJM-59, into the feed stuff, separately and/or mixed, and these three types of yeasts were administered to the Hy-line brown layers for 8 weeks. Compared with control, the laying performance, the egg quality, and the number of intestinal lactic acid producing bacteria of the treated group were improved and/or increased significantly. Pichia anomala SKM-T potently reduced ammonia production from poultry manure, and the other strains were also able to reduce the ammonia from it. The optimum condition for the reduction of ammonia with Pichia farinosa SKM-1, Pichia anomala SKM-T, and Galactomyces geotrichum SJM-59 was obtained by using the augmented centroid-simplex design. The ratio of optimum condition was Pichia farinosa SKM-1:Pichia anomala SKM-T:Galactomyces geotrichum SJM-59=0.295:0.209:0.080, and the estimate was -123.36 (p=0.0l38). An ability to reduce the ammonia production from livestock manure was maintained at $30^{\circ}C$ for 15 weeks.