• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.536-541
• /
• 2000

In recent years there has been a steady increase in geoenvironmental engineering research where geotechnical engineering has been combined with environmental concerns in the field of construction and industrial waste reusing in civil works. Many of these projects involve some investigation on the characteristics of geotechnical and environmental properties. In this study, investigation and test on the characteristics of demolished waste concrete was carried out to detect the physical, mechanical, and environmental properties for reusing as embankment and backfill materials in civil works.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1416-1425
• /
• 2002

In this study, the effects of combined environmental factors on mechanical and thermal analysis properties of graphite/epoxy composites were evaluated by the use of an accelerated aging test. Environmental factors such as temperature, moisture. and ultraviolet were considered. A xenon-arc lamp was utilized for ultraviolet light. and exposure times of up to 3000 hours were applied. Several types of specimens - tensile. bending, and shear specimens those are transverse to the fiber direction, and bending specimens those are parallel to the tiber direction - were used to investigate the effects of environmental factors on mechanical properties of the composites. Also, glass transition temperature, storage shear modulus, loss shear modulus, and tan ${\delta}$ were measured as a function of exposure times through a dynamic mechanical analyzer. In addition. a suitable testing method for determining the effect of environmental factors on mechanical properties is suggested by comparing the results from using two different types of strain measuring sensors. Finally, composite surfaces exposed to environmental factors were examined using a scanning electron microscope.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.824-829
• /
• 2007

Mechanical and thermal analysis properties of carbon fiber/epoxy composite for train carbody were evaluated by varying with environmental factors such as ultraviolet, temperature, and moisture. Accelerated environmental aging tester was utilized for this study. Testing temperature was set to $80^{\circ}C$ and ultraviolet was obtained through xenon-arc lamp. To consider moisture, water sprayed on specimen for 18 minutes every 2 hour. All the specimens were made of CF1263/Epoxy composite. Mechanical properties such as tensile, bending, and shear properties were evaluated through a material testing system. Also, thermal analysis properties such as storage shear modulus, loss shear modulus, and tan ${\delta}$ were measured through dynamic mechanical analyzer. Finally surfaces of the composite exposed to environmental factors were examined using a scanning electron microscope. From experimental results, those properties of CF1263/Epoxy composite were shown to be slightly decreased due to environmental factors.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.2
• /
• pp.53-61
• /
• 2013

The present study elucidated the growth properties of Sasa borealis communities distributed in the lower layer of deciduous broadleaf forests in temperate zones and analyzed the correlation between the growth properties of S. borealis and positional environmental factors. The higher the culm height of S. borealis was, the higher the values of the leaf number, leaf area, and foliage layer thickness became. This might be because as the culm height of S. borealis increased, the acquisition of light sources became easier so that the biomass of leaves increased simultaneously for smooth anabolism. S. borealis seem to change their growth mode for smooth acquisition of light resources. The culm density of S. borealis and the leaf number, leaf area and foliage layer thickness of S. borealis did not show any clear correlation. The values of the culm height, leaf number, leaf area, and foliage layer thickness of S. borealis as the above altitude of the location of S. borealis increased. It seems like that growth conditions such as temperatures and winds are deteriorated as the above altitude of the location of S. borealis increased so that S. borealis becomes smaller. No clear correlations were shown between the physiochemical properties of soil and S. borealis' growth properties. It seems like that the growth of S. borealis complexly intertwined with diverse environmental factors and that due to the physiological integration of S. borealis, certain physiochemical properties do not unilaterally affect S. borealis' growth properties.

• International Journal of Railway
• /
• v.1 no.3
• /
• pp.113-116
• /
• 2008

The long-tenn exposure of polymeric composite materials to extreme-use environments, such as pressure, temperature, moisture, and load cycles, results in changes in the original properties of the material. In this study, the effect of combined environmental factors such as ultraviolet ray, high temperature and high moisture on mechanical and thermal analysis properties of glass fabric and phenolic composites are evaluated through a 2.5 KW accelerated environmental aging tester. The environmental factors such as temperature, moisture and ultraviolet ray applied of specimens. A xenon-arc lamp is utilized for ultraviolet light and exposure time of up to 3000 hours are applied. Several types of specimens - tensile, bending, and shear specimens that are warp direction and fill direction are used to investigate the effects of environmental factors on mechanical properties of the composites. Mechanical degradations for tensile, bending and shear properties are evaluated through a Universal Testing Machine (UTM). Also, storage shear modulus, loss shear modulus and tan a are measured as a function of exposure time through a Dynamic Mechanical Analyzer (DMA). From the experimental results, changes in material properties of glass fabric and phenolic composites are shown to be slightly degraded due to combined environmental effects.

• Environmental Analysis Health and Toxicology
• /
• v.23 no.3
• /
• pp.143-164
• /
• 2008

Concern about perfluorinated compounds (PFCs) is growing nationally as well as globally. PFCs could be considered emerging POPs due to their environmentally persistent, bioaccumulative, and potentially harmful properties. Moreover. perfluoroalkylates (PFAs) such as PFOS and PFOA are reported to experience long-range transport (LRT) to the Arctic in spite of their low volatility and strong solubility. The possible pathways contributing to LRT have been proposed but are still in debate in combination with unclear source definition and uncertain physico-chemical properties. The environmental fate of PFCs is more complicated because of the presence of precursors that are degraded to PFAs and are extremely different from their daughters, PFAs. in physico-chemical properties. To what extent and through what pathways are human and wildlife exposed is determined by the environmental fate and distribution of PFCs. To define uncertainties in fate and distribution thus is critical to prevent erroneous policy and/or determination related with exposure and risk reduction. This article aimed to review controversy and/or uncertain issues for the environmental fate and distribution of PFCs and to prospect research topics necessary to dissolve uncertainties.

• Atmosphere
• /
• v.31 no.1
• /
• pp.113-141
• /
• 2021

The impacts of ice clouds on the energy budget of the Earth and their representation in climate models have been identified as important and unsolved problems. Ice clouds consist almost exclusively of non-spherical ice crystals with various shapes and sizes. To determine the influences of ice clouds on solar and infrared radiation as required for remote sensing retrievals and numerical models, knowledge of scattering and microphysical properties of ice crystals is required. A conventional method for representing the radiative properties of ice clouds in satellite retrieval algorithms and numerical models is to combine measured microphysical properties of ice crystals from field campaigns and pre-calculated single-scattering libraries of different shapes and sizes of ice crystals, which depend heavily on microphysical and scattering properties of ice crystals. However, large discrepancies between theoretical calculations and observations of the radiative properties of ice clouds have been reported. Electron microscopy images of ice crystals grown in laboratories and captured by balloons show varying degrees of complex morphologies in sub-micron (e.g., surface roughness) and super-micron (e.g., inhomogeneous internal and external structures) scales that may cause these discrepancies. In this study, the current idealized models representing morphologies of ice crystals and the corresponding numerical methods (e.g., geometric optics, discrete dipole approximation, T-matrix, etc.) to calculate the single-scattering properties of ice crystals are reviewed. Current problems and difficulties in the calculations of the single-scattering properties of atmospheric ice crystals are addressed in terms of cloud microphysics. Future directions to develop physically consistent ice-crystal models are also discussed.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.153-162
• /
• 2020

Aiming at the mechanical and structural characteristics of the contact zone composite rock, the shear tests and numerical studies were carried out. The effects of the differences in mechanical properties of different materials and the normal stress on shear properties of contact zone composite samples were analyzed from a macro-meso level. The results show that the composite samples have high shear strength, and the interface of different materials has strong adhesion. The differences in mechanical properties of materials weakens the shear strength and increase the shear brittleness of the sample, while normal stress will inhibit these effect. Under low/high normal stress, the sample show two failure modes, at the meso-damage level: elastic-shearing-frictional sliding and elastic-extrusion wear. This is mainly controlled by the contact and friction state of the material after damage. The secondary failure of undulating structure under normal-shear stress is the nature of extrusion wear, which is positively correlated to the normal stress and the degree of difference in mechanical properties of different materials. The increase of the mechanical difference of the sample will enhance the shear brittleness under lower normal stress and the shear interaction under higher normal stress.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.137-146
• /
• 2016

This experiment was designed to assess the physical and chemical properties of growing media substituted with a range of increasing concentrations of pretreated wood and to relate these properties to plant growth responses. For preparing the growing media, each material was combined with rural soil, peat, perlite and pretreated wood. Physicochemical properties studied were similar to ideal substrate ranges for plant growth on growing media, including pretreated wood. Physical properties were also well maintained over time. In comparison to plants growing in 100% rural soil, tall fescue(Festuca arundinacea) in the prepared growing media achieved better growth, especially when using the 50% rural soil + 50% PPW(peat + perlite + pretreated wood, 3:1:6(w/w/w)) and 30% rural soil + 70% PPW (peat + perlite + pretreated wood, 3:1:6(w/w/w)), and showed improved germination percentage. We confirmed the potential use of growing media, including pretreated wood. Furthermore, our results show a correlation among the physicochemical properties of tall fescue(Festuca arundinacea); physical properties were significantly influenced by germination and aerial parts. The root length of physicochemical properties was correlated with bulk density and organic compound (p<0.01).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.136-143
• /
• 2015

It is well known that the use of PCC as a filler for printing paper making brought about the serious deterioration of strength properties of paper, although PCC could be helpful to reduce the energy consumption. The use of modified PCC with NCC was tried to solve and/or reduce the strength deterioration problem. NCC was prepared from SwBKP by the acid hydrolysis. There was no significant changes in chemical properties and crystalline structure. However the cyrstallinity of NCC was higher than those of SwBKP. The different dosage of NCC was applied to modify the properties of PCC. 0.1% of NCC dosage was enough to improve ash retention and paper properties. The use of modified PCC with NCC as a filler improved ash retention, bulk, opacity and formation without the serious deterioration of strength properties. Thus the use of modified PCC with NCC might be helpful for not only reduction of energy consumption but also increase of filler dosage without the significant sacrifice of strength properties by the optimization of retention system.