• Steel and Composite Structures
• /
• v.32 no.1
• /
• pp.1-19
• /
• 2019

The aim of the paper is the prediction of the seismic collapse mode of steel storage pallet racks under seismic loads. The attention paid by the researchers on the behaviour of the industrial steel storage pallets racks is increased over the years thanks to their high dead-to-live load ratio. In fact, these structures, generally made by cold-formed thin-walled profiles, present very low structural costs but can support large and expensive loads. The paper presents a prediction of the seismic collapse modes of multi-storey racks. The analysis of the possible collapse modes has been made by an approach based on the kinematic theorem of plastic collapse extended to the second order effects by means of the concept of collapse mechanism equilibrium curve. In this way, the dissipative behaviour of racks is determined with a simpler method than the pushover analysis. Parametric analyses have been performed on 24 racks, differing for the geometric layout and cross-section of the components, designed in according to the EN16618 and EN15512 requirements. The obtained results have highlighted that, in all the considered cases, the global collapse mechanism, that is the safest one, never develops, leading to a dangerous situation that must be avoided to preserve the structure during a seismic event. Although the studied racks follow all the codes prescriptions, the development of a dissipative collapse mechanism is not achieved. In addition, also the variability of load distribution has been considered, reflecting the different pallet positions assumed during the in-service life of the racks, to point out its influence on the collapse mechanism. The information carried out from the paper can be very useful for designers and manufacturers because it allows to better understand the racks behaviour in seismic load condition.

• Journal of Marine Bioscience and Biotechnology
• /
• v.10 no.2
• /
• pp.91-96
• /
• 2018

There are many eutrophic lakes by point and non-point pollution sources such as in dustrial waste water, domestic raw sewage, and mucks. The eutrophic lakes not only cause algal blooms but also destroy the ecosystem in the lakes due to high nutrient concentrations. The purpose of this study was to improve water quality in eutrophic lakes by cultivating microalgae using photobioreactors (PBRs) with selectively permeable mesh (SPM), supplying nutrients in the lake and inhibiting cell leakage by diffusion and water permeability. Chlorella vulgaris, was cultivated using PBRs with SPM installed in Inkyung Lake located in Inha university, Incheon, Korea. When cultivating C. vulgaris, $8.3g/m^2/day$ of average biomass productivity was obtained at 3 days. Furthermore, concentrations of total nitrogen and phosphorus were reduced by 35.7% and 84.2%, respectively, compared to initial condition and water quality in eutrophic lake was improved to oligotrophic environment. These results suggest that microalgal cultivation using PBRs with SPM in the lake could produce microalgal biomass as well as improve water quality by decreasing nutrient concentrations.

• Journal of Korean Living Environment System
• /
• v.24 no.1
• /
• pp.95-106
• /
• 2017

The purpose of this study was to evaluate comfort functions while wearing firefighters' protective gloves in dry and wet conditions at $70^{\circ}C$ air temperature with radiant heat. Four types of firefighting gloves from Korea, Germany, United States, and Japan were evaluated in both dry and wet conditions by eight male firefighters. Firefighters put their hands and forearms wearing gloves into a hands-radiant chamber that maintained at an air temperature of $70{\pm}2^{\circ}C$ ($T_a$) and globe temperature $106^{\circ}C$ ($T_g$). During the exposure, subjects followed a fixed protocol of manual movements and stopped the exposure when they felt being intolerable. Results showed that completion time was extended by 6 min on average when gloves got wet and 15 min for the Japanese gloves was extended when compared to its dry condition (p<.001); microclimate humidity on the palm at the last stage was greater for wet conditions than dry conditions in the all gloves; and skin temperatures on mid-fingertip, palm, and hand were significantly lower for wet conditions than dry conditions especially for Japanese gloves (p<.001). These results indicate that the exposure time without thermal pain to radiant heat could be extended by wetting gloves during the low radiant heat exposure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1524-1530
• /
• 2018

In this paper, we designed a product that can prevent environmental pollution, waste of resources, and leakage of foreign currency by commercializing a green IT solution by merging a used smart phone with the IoT object communication technology for the first time in the world. For the experiment of the designed system, various performance and communication condition was experimented by installing it in the actual crop cultivation facility. As a result, when a problem occurs, the alarm sound and video notification are generated by the user's smart phone, and remote control of various installed devices and data analysis in real time are possible. In this study, it is thought that the terminal management board developed for the utilization of the used smart phone can be applied to various fields such as agriculture and environment.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.406-415
• /
• 2018

Educational satisfaction is an important indicator of the educational field but the existing customer satisfaction index mainly focused on partial area because measurements could not reflect the alteration of university environment. The purpose of this research is to develop a new UCSI for university to improve the quality of university education. This research demonstrates validity and reliability of UCSI. This research uses the second-order confirmatory factor analysis. The results indicate that the reliability and validity of UCSI is verified. Education condition, education course, university development and student support are clarified to be appropriate components of the satisfaction survey. This research develops UCSI and applies it in a university. University managers can be used to measure the satisfaction level of university education and to improve the quality of university education.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.51-55
• /
• 2019

This paper proposes a speech enhancement method utilizing the feature compensation gain for robust speech recognition performances in noisy environments. In this paper we propose a speech enhancement method utilizing the feature compensation gain which is obtained from the PCGMM (Parallel Combined Gaussian Mixture Model)-based feature compensation method employing variational model composition. The experimental results show that the proposed method significantly outperforms the conventional front-end algorithms and our previous research over various background noise types and SNR (Signal to Noise Ratio) conditions in mismatched ASR (Automatic Speech Recognition) system condition. The computation complexity is significantly reduced by employing the noise model selection technique with maintaining the speech recognition performance at a similar level.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.47-54
• /
• 2018

The purpose of this study is to verify the long - range measurement performance for practical field application of VDMS. The reliability of the VDMS was verified by comparison with the existing monitoring sensor, GPS, Accelerometer and LDS. It showed the ability to accurately measure the dynamic displacement by tracking a motion of free vibration of target. And using the PSD function of measured data, the results in the frequency domain were also analyzed. We judged that VDMS is able to identify the higher system mode and has sufficient reliability. Based on the reliability verification, we conducted tests for long-distance applicability for actual application of VDMS. The distance from the stationary target model structure was increased by 50m interval, and the maximum distance was set to 400m. From the distance of 150m, the image obtained by the commercial camcorder has an error in the analysis, so the measured displacement comparison was performed between the LDS and the refractor telescope measurement results. In the measurement results of the displacement area of VDMS, the data validity was deteriorated due to the data shift by the external force and the quality degradation of the enlarged image. However, even under the condition that the effectiveness of the displacement measurement data of VDMS is low, the first mode characteristic included in the free vibration of the object is clearly measured. If the influence from the external environment is controlled and stable data is collected, It is judged that reliability of long-distance VDMS can be secured.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.41-47
• /
• 2018

The buoy-enabled underwater surveillance system is a device that is installed in a particular sea area and operated for a certain period of tine and moved to another sea area after recovery. In this paper, a mooring method which is applied for a buoy-enabled underwater surveillance system was selected to maintain installation and enure stable operation. Also, the structure of the mooring line was designed. Two-point mooring method was selected considering interference with the communication cable of array-assembly. The composite structure of buoy chain, nylon rope, and anchor chain is designed as the basic component of mooring line. For the verification of design, a numerical simulation and wave tank experiment were performed. Their results were confirmed similarity in test condition. Finally, the mooring lines were designed for the environment of the sea trial location. The mooring line produced by the final design confirmed the stability above the significant wave height considered in the design on the sea trial.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.1
• /
• pp.110-117
• /
• 2019

Objective: An experiment was conducted to evaluate the effects of dietary glutamine (Gln) and arginine (Arg) supplementation on performance, intestinal morphology and ascites mortality in broilers. Methods: A total of 675 day old chicks were randomly allocated to 9 experimental groups in a $3{\times}3$ factorial arrangement based on a completely randomized design with 5 replicates of 15 chicks. Three levels of dietary Gln (0%, 0.5%, and 1%) and Arg (100%, 130%, and 160% of Ross recommendation) supplementation were used in ascites inducing condition ($15^{\circ}C{\pm}1^{\circ}C$) from 7 to 42 days of age. Results: Dietary supplementation of Gln increased body weight gain during grower, finisher and total periods (p<0.05) and increased feed intake during total period. Ascites mortality was decreased by Gln supplementation (p<0.05). Gln supplementation increased the villus height (VH) and crypt depth (CD) in duodenum and jejunum (p<0.05). Arg supplementation decreased CD in duodenum and jejunum, and increased ileum villus width (VW) and also VH/CD ratio in duodenum and jejunum (p<0.05). Both Gln and Arg increased the goblet cell number (GCN) in duodenum whereas Gln supplementation decreased GCN in jejunum and ileum (p<0.05). The $Gln{\times}Arg$ interaction were observed for right ventricle (RV)/total ventricular (TV) ratio, VH, VW, CD, VH/CD. Conclusion: It was concluded that dietary 0.5% Gln alone or along with 130% Arg of Ross requirement, improve the intestinal morphology and performance and hence decrease the ascites mortality in broiler chickens with cold induced ascites.

• Knowledge Management Research
• /
• v.19 no.4
• /
• pp.39-58
• /
• 2018

This study explores the effects of business consulting on the business performance of firms by using a unique survey for various industry sectors in Korea. We attempt to build a consulting model that shows the structural relationship between consulting factors and consulting performance. Moreover, through the consulting model, we conduct the analysis of elasticity of consulting factors and the group analysis based on firm age. First, the findings show that all consulting factor has a positive impact on the consulting performance, but in the results of factor elasticity, they have a somewhat different impact. Second, while the support of CEOs is relatively more elastic than other consulting factors with respect to the completion of consulting projects, the institutional condition for consulting is relatively more elastic than other factors with respect to the contribution to business performance. Third, since the high-firm age group has a greater capacity to absorb and utilize external knowledge and resource, the consultant competency and institutional conditions have a more impact on the consulting performance than the low-firm age group. On the other hand, in the low-firm age group, the result indicates that the support of CEOs has a more impact in the consulting performance than the high-firm age group. According to the total effect, the support of CEOs in the entire model has the highest impact on the consulting performance. Thus, it is probably difficult to achieve the improvement of business performance through consulting as well as the successful consulting projects without the CEOs' commitment and awareness about the consulting projects.