• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.437-447
• /
• 2020

Following the extension of human life expectancy, the number of elderly traffic accidents that have been increasing at a rapid pace since 2018 has also emerged as a social problem. The traffic accident rate among those aged 65 and older is increasing, but traffic safety policies are insufficient. Based on the analysis of traffic accident status for senior citizens and traffic accident for the past five years from 2014, the reduction plan is to be presented in three main aspects. First, the system needs systematic management by strengthening the system of senior citizens' transport policy departments and driver's license for senior citizens in government agencies, such as the United States, Britain and Japan, from an institutional perspective, so that the walking time and crosswalk traffic environment for the vulnerable should be improved from an environmental perspective. In addition, in human terms, the ability to cope with real-time changes in traffic conditions should be enhanced by training transportation safety experts to secure the effectiveness of education for elderly drivers and by strengthening safety education for those with driver's license and expanding experienced traffic safety facilities to enhance the ability of senior citizens to cope with the changing traffic conditions in real time.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.1
• /
• pp.92-96
• /
• 2003

The on-site sewage sludge vermicomposting equipment was designed and evaluated on the batch and continuous tests. The vermicomposting equipment was designed to consider the mechanization as well as automation. In terms of performance evaluation of equipment with continuous experiments, the highest treatment rate was found in the condition of 5mm in particle size and 10mm in e feeding height. Also, 20~25kg of earthworm per 50kg of sewage sludge was the most appropriate density of earthworm. In addition, the most effective separation of cast was found when the earthworm breeding box height was 80cm. The performance evaluation on equipment allowed the establishment of earthworm composting capacity of 2ton per a day with a size of $5{\times}3{\times}1m$ and the automatic control devices.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.69-85
• /
• 2010

Currently, environmental contaminants that can cause Aromatic types of hydrocarbons, less than 1% made of Aromatic Free kind of used products, soybean oil products with linseed oil with the products, rice products using a wide range of environmentally ecological ink since 2000 is released quickly. All materials used in printed material, if the green is the best way to print the composite materials in industrial applications, because each process on the print quality and productivity, there can be many differences in this experiment because it accounts for a large proportion in the print general ink in the ink section and the International color standards(ISO2846-1:2006) certified ecological ink were compared. Therefore, in this paper has the ink released from the same company, each common general ink and ecological ink in the same condition which results were focused on whether the emerging international color standard(ISO 2846-1:2006) recognized for environmentally ecological ink printed color reproduction of the actual offset(color reproduction) how conformity to ISO 12647-2 standard color on the basis of the offset would check Color Reproduction. Based on the results of the experiments of this study, given the ecological ink coated paper, uncoated paper both color difference and the gamut of the ISO 12647-2 standard is suitable for ecological ink, the ink's color gamut reproduction, even more than existing international standards, there is no confirmed that the correct color reproduction possible. Using environmentally ecological ink industries is expected to respond to environmental policy.

• Journal of Korean Physical Therapy Science
• /
• v.11 no.3
• /
• pp.49-59
• /
• 2004

The purpose of this study was carried out to rind out the prevalence of occupational musculoskeletal disorders among workers in manufacturing industries, so that the result could provide basic data necessary to prevent musculoskeletal disorders. Information on general characteristics, occupational characteristics, and musculoskeletal symptoms were obtained by a self-administered questionnaire between October and November in 2002, from 345 workers in Kim-hae and Ulsan, Kyung-nam province. The data were analyzed for chi-square test by using SPSS NVIN 10.0 program. The results are as follows: According to the self-reports, among musculoskeletal symptoms complain on shoulders are topping for 50.4%, low back is followed for 40.6%, leg/foot 35.7%, neck 34.5%, wrist/hand/finger 30.1%, and arm 24.3%. According to occupational characteristics prevalence by anatomical site, about neck pains 119 subject, occupational satisfaction is 62,6% in moderate group, work shift is 71.8% in no work shift group, each significant high. Symptom complain rate of 104 patients who complained on wrist, hand and finger pain is significantly related that 36.5% below 5 years and 36.5% above 15 years have been worked group. And each of them are significantly related 77.9% in labor workers group, 70% in no work shift group, 54.8% in frequent transfer group. Among 140 subjects who have back pain, that is significationtly reported on 37.1% below 5 years and 37.9% above 15 years and 60.0% moderate satisfied occupation group have been worked group. Therefore, some efforts should be proceeded such as improvement of working condition, flexibility for changing work, more pleasant and better working environment, and etc.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.1
• /
• pp.53-65
• /
• 2001

To estimate agricultural water demand, many factors such as weather, crops, soil, cultivation method, crop coefficient and cultivation area, etc. must be considered. But it is not easy to estimate water demand in consideration of these factors, which are variable according to growth stage and regional environment. This study provides estimation system for agricultural water demand(ESAD) in order to estimate water demand easily and accurately, and arranges all factors needed for water demand estimation. This study identifies the application of estimation system for agricultural water demand with the data observed in the other studies, and analyzes nationwide agricultural water demand. The results are as follows. 1) The practice of different rice cultivation in the paddy field resulted in different water demands. Water depth and infiltration ratio in paddy are the most important factors to estimate water demand. The water depths in paddy simulated by ESAD is very similar to the observed ones. 2) Water demand of upland crops varies with the crops, soil, etc.. Effective rainfall estimated by daily routing of soil moisture varies according to the crops, soil, and effective soil zone(root depth). As crop root become grown, effective rainfall and an amount of irrigation water has been increased. 3) The current unit water demand of upland crops applied as 500mm or 550mm to estimate water demand does not reflect the differences caused by the crops, regional surrounding, weather condition, etc. Results from ESAD for the estimation of water demand of upland crops show that ESAD can simulate the actual field conditions reasonably because it simulates the actual irrigation practices with the daily routing of soil moisture.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.1
• /
• pp.111-118
• /
• 2015

This research aims to utilize lapilli from the Mt. Baekdusan as environmently-friendly construction material. First of all, the neutralizing method for fabricating lapilli-cement-mixed bioblock was examined. And then, by use of the neuralized bioblock with microorganism for water purification, the growth inhibition effect against the pathogenic coliform bacillus was evaluated. The result regarding growth inhibition effect on pathogenic coliform bacillus indicates that the pretreatment condition, which is a concurrent procession with aqueous solution of 10% di-ammonium Phosphate after water curing, led to pH degraded below 10 which was the target value. Therefore it was concluded that the method was effective on bio-block neutralization. The microorganisms purifying water and di-ammonium phosphate were detected through the examination for microorganism existence on the bioblock, therefore it was concluded that the bioblock composed of lapilli and cement is able to be utilized in various structures as an environment friendly construction material.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.315-330
• /
• 2017

Halo coronal mass ejections (CMEs) originating from solar activities give rise to geomagnetic storms when they reach the Earth. Variations in the geomagnetic field during a geomagnetic storm can damage satellites, communication systems, electrical power grids, and power systems, and induce currents. Therefore, automated techniques for detecting and analyzing halo CMEs have been eliciting increasing attention for the monitoring and prediction of the space weather environment. In this study, we developed an algorithm to sense and detect halo CMEs using large angle and spectrometric coronagraph (LASCO) C3 coronagraph images from the solar and heliospheric observatory (SOHO) satellite. In addition, we developed an image processing technique to derive the morphological and dynamical characteristics of halo CMEs, namely, the source location, width, actual CME speed, and arrival time at a 21.5 solar radius. The proposed halo CME automatic analysis model was validated using a model of the past three halo CME events. As a result, a solar event that occurred at 03:38 UT on Mar. 23, 2014 was predicted to arrive at Earth at 23:00 UT on Mar. 25, whereas the actual arrival time was at 04:30 UT on Mar. 26, which is a difference of 5 hr and 30 min. In addition, a solar event that occurred at 12:55 UT on Apr. 18, 2014 was estimated to arrive at Earth at 16:00 UT on Apr. 20, which is 4 hr ahead of the actual arrival time of 20:00 UT on the same day. However, the estimation error was reduced significantly compared to the ENLIL model. As a further study, the model will be applied to many more events for validation and testing, and after such tests are completed, on-line service will be provided at the Korean Space Weather Center to detect halo CMEs and derive the model parameters.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1826-1835
• /
• 2008

An autotrophic denitrification reactor (ADR-l) and a heterotrophic denitrification reactor (HDR-2) were operated to remove nitrate and nitrite in an anoxic environment in raw sewage. The $NO_3$-N removal rate of ADR-l was shown to range from 52.8% to 78.7%, which was higher than the $NO_3$-N removal rate of HDR-2. Specific denitrification rates (SDNR) of ADR-l and HDR-2 were 3.0 to 4.0 and 1.1 to $1.2\;mgNO_3$-N/gVSS/h, respectively. From results of restriction fragment length polymorphism (RFLP) of the 16S rRNA gene, Aquaspirillum metamorphum, Alcaligenes defragrans, and Azoarcus sp. were $\beta$-Proteobacteria that are affiliated with denitritying bacteria in the ADR-l. Specifically, Thiobacillus denitrificans was detected as an autotrophic denitrification bacteria. In HDR-2, the $\beta$-Proteobacteria such as Denitritying-Fe-oxidizing bacteria, Alcaligenes defragrans, Acidovorax sp., Azoarcus denitrificans, and Aquaspirillum metamorphum were the main bacteria related to denitrifying bacteria. The $\beta$-and $\alpha$-Proteobacteria were the important bacterial groups in ADR-l, whereas the $\beta$-Proteobacteria were the main bacterial group in HDR-2 based on results of fluorescent in situ hybridization (FISH). The number of Thiobacillus denitrificans increased in ADR-l during the operation period but not in HRD-2. Overall, the data presented here demonstrate that many heterotrophic denitritying bacteria coexisted with autotrophic denitrifying bacteria such as Thiobacillus denitrificans for nitrate removal in ADR-l. On the other hand, only heterotrophic denitritying bacteria were identified as dominant bacterial groups in HDR-2. Our research may provide a foundation for the complete nitrate removal in raw sewage of low-COD concentration under anoxic condition without any external organic carbon or the requirement of post-treatment.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.7
• /
• pp.898-904
• /
• 2014

The stability of Bacillus licheniformis alpha-amylase (BLA) under acid condition was enhanced through direct evolution using the error-prone polymerase chain reaction. One beneficial mutation site, H281I, was obtained in BLA. The specific activity of H281I was 161/352 U/mg, which was 62.6/27.5% higher than that of the wild-type (WT) (99/276 U/mg) at pH 4.5/6.5 and $95^{\circ}C$. The pH optimum for H281I was decreased about 1 unit, whereas no significant changes of optimum temperature and thermostability were observed compared with the wild type (WT). The $k_{cat}/K_m$ value of H281I was 1.7-/1.4-fold higher at pH 4.5/6.5, respectively, than that of WT. The structure model analysis indicated that the H281I mutation altered the predicted interaction between the amino acid residues at 281 and 273, thus creating a conducive local environment for substrate binding, as reflected by its decreased $K_m$, and consequently increased the specific activity.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.480-491
• /
• 2016

This study aims to determine the factors associated with preparation for turnover in youth employees, using a data from the Youth Panel 2007-2013. Study population were composed by 17,037 employees and a generalized estimating equations (GEE) using panel logit model was performed. It was identified that socioeconomic(age, sex, level of education, monthly income and type of employment) and work-related factors(perception of difficulties in performing tasks compared to level of education, perception on the Job-Major match, stabilization of employment, autonomy and empowerment of jobs, peer relationship in workplace) were statistically significant variables. Based on the analysis, dissatisfaction on working environment or condition might lead to employees prepare to turnover and it is a series of activities that to improve welfare and find a suitable job for oneself.