• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.619-623
• /
• 2014

The acid hydrolysis and enzymatic saccharification were carried out for the production of cellulosic ethanol. The possibility of bio-energy production from tangerine peel and apple and watermelon rind was evaluated by determining the optimum production condition. The optimum conditions for the production of cellulosic ethanol from fruit peel were as follows: the sulfuric acid concentration and reaction time of acid hydrolysis for the ethanol production from an apple rind were 20 wt% and 90 min, respectively. The concentration of sulfuric acid for tangerine peel and a watermelon rind at the hydrolysis time of 60 min were 15 wt% and 10 wt%, respectively. A viscozyme was proven as the best conversion for the ethanol production when using enzymatic saccharification from fruit peels. The optimum enzymatic saccharification time for tangerine peel and apple and watermelon rind were 60, 180, and 120 min, respectively.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.87-92
• /
• 2013

Nonthermal plasma hybridized with photocatalysts is proven to be an effective tool to degrade toxic organics in wastewater. In this study, a specially designed dielectric barrier discharge (DBD) plasma system combined with photocatalysts was applied to decompose pestiticides such as dichlorovos, carbofuran and methidathon, which are frequently used in the golf courses and the orange plantations. The degradations of the pesticides in single and coupled systems were evaluated. The single system was used with ozone plasma which consisted of electrons, radicals, ions produced by oxygen gas and air, with and without ultra-violet (UV) irradiation, respectively. The coupled systems utilized the air-derived ozone plasma combined with zinc oxide, titanium dioxide and graphite oxide photocatalyst activated by UV. The graphite oxide was synthesized by a modified Hummer's method and characterized using FTIR spectrometer. It was elucidated that the plasma reaction with graphite oxide (0.01 g/L) brought about almost 100% of degradation degrees for dichlorovos and carbofuran in 60 min, as compared with the performances showed by no catalyst condition. The photocatalyst-hybridized plasma in the presence of UV irradiation was proven to be an effective alternative for degrading pesticides.

• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.95-101
• /
• 2011

Present study aimed to investigate morphological change and gene expression in the gill of Cyprinus carpio after exposure against muddy water caused by riverbed disturbance with various rearing condition. The gill of C. carpio showed abnormal shapes in its secondary lamellae and a rough surface with impure debris after exposed to muddy water for 80 days. In addition, the gills showed the edema, the exfoliation of epithelial cell, and the fusion of the secondary lamellae. Using 20 ACPs, 24 differentially expressed genes (DEGs) exposed to muddy water for 80 days were identified. 17 genes among them were up-regulated, while 7 genes were down-regulated in preterm deliveries. A BLAST searches revealed that 3 genes were revealed known genes as calcium transporter 1 (TRPV6) mRNA, macha mRNA for putative puroindoline b protein, and Efnb3 protein-like. Therefore, it is considered that Efnb3 gene from gill would be a useful indicator for neurobehavioral changes in fish influenced by muddy water.

• Korean Journal of Ecology and Environment
• /
• v.50 no.3
• /
• pp.355-361
• /
• 2017

In this study, we investigated the response of freshwater oligochaete, Tubifex tubifex, to the water temperature changes and the differences of substrate composition in a laboratory condition. The changes of body shape were observed in a test cage according to the water temperature change ranging from $10^{\circ}C$ to $30^{\circ}C$ with $2^{\circ}C$ interval every 10 minutes. The substrate preference was observed with four different substrate composition from silt-clay to coarse sand. Our results displayed that T. tubifex preferred substrates with the smallest particle size (<0.063 mm). The water temperature influenced on the activity and body shape of T. tubifex, showing low activity with the coiled and constricted body shapes at lower temperature and high activity with relaxed linear body shapes at higher temperature.

• Health Policy and Management
• /
• v.22 no.2
• /
• pp.249-262
• /
• 2012

The purpose of this study is to investigate the determinants of intent to use the medical-application(M-APP) of smart phone of nurses working at the nursing department of two university hospitals in Korea. The independent variables used in the study are performance expectancy, effort expectancy, social influence, facilitating condition, attitude toward using technology, self efficacy, anxiety, ability to use a smart phone easily and socio-demographic characteristics. The sample used in the study consisted of 378 nurses selected from two university hospitals located in Seoul and Wonju, Korea. Data were collected with self-administered questionnaires and analyzed using multiple regression analysis. The results of this study revealed 5 independent variables of attitude toward using technology, self efficacy, anxiety, ability of using APP and interest in smart phone have the significant effect on the intent to use the M-APP. The results imply that the hospital administrators and nursing managers should try to give more chances to learn the skills of using M-APP, provide sufficient resources and establish the stable hospital information system in order for their employees to use the M-APP more easily at their working places.

• Journal of Surface Science and Engineering
• /
• v.45 no.6
• /
• pp.264-271
• /
• 2012

Due to the good corrosion resistance and machinability, copper alloy is commonly employed for shipbuilding, hydroelectric power and tidal power industries. The Cu alloy, however, has poor durability, and the seawater application at fast flow condition becomes vulnerable to cavitation damage leading to economic loss and risking safety. The HVOF(High Velocity Oxygen Fuel) thermal spray coating with WC-10Co4Cr were therefore introduced as a replacement for chromium or ceramic to minimize the cavitation damage and secure durablility under high-velocity and high-pressure fluid flow. Cavitation test was conducted in seawater at $15^{\circ}C$ and $25^{\circ}C$ with an amplitude of $30{\mu}m$ on HVOF WC-10Co4Cr coatings produced by thermal spray. The cavitation at $15^{\circ}C$ and $25^{\circ}C$ exposed the substrate in 12.5 hours and in 10 hours, respectively. Starting from 5 hours of cavitation, the coating layer continued to show damage by higher than 160% over time when the temperature of seawater was elevated from $15^{\circ}C$ to $25^{\circ}C$. Under cavitation environment, although WC-10Co4Cr has good wear resistance and durability, increase in temperature may accelerate the damage rate of the coating layer mainly due to cavitation damage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4729-4735
• /
• 2014

To protect the environment, the regulation of emissions from off-road engines which are relatively neglected, is being reinforced. This paper deals with the robust design of off-road diesel engines considering the emission characteristics. Measurements of the NOx and PM levels based on the DOE were carried out. The injector hole number, injection timing and EGR rate were selected as the control factors. The orthogonal arrays table $L_9(3^3)$ was made from 2 or 3 levels for each factor and measurements of emissions were accomplished based on the table. The small-the-better SN ratio according to the Taguchi method was evaluated. The ANOVA (analysis of variance) for the SN ratio was conducted. The injection timing on the NOx emissions and the EGR rate on the PM have the largest effect on the low-load operation condition. The confidence levels of the control factors were more than 90%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2021-2030
• /
• 2012

Premature ventricular contraction(PVC) is the most common disease among arrhythmia and it may cause serious situations such as ventricular fibrillation and ventricular tachycardia. Particularly, in the healthcare system that must continuously monitor patient's situation, it is necessary to process ECG (Electrocardiography) signal in realtime. In other words, the design of algorithm that exactly detects R wave using minimal computation and classifies PVC by analyzing the persons's physical condition and/or environment is needed. Thus, the patient adaptive pattern matching algorithm for the classification of PVC is presented in this paper. For this purpose, we detected R wave through the preprocessing method, adaptive threshold and window. Also, we applied pattern matching method to classify each patient's normal cardiac behavior through the Hash function. The performance of R wave detection and abnormal beat classification is evaluated by using MIT-BIH arrhythmia database. The achieved scores indicate the average of 99.33% in R wave detection and the rate of 0.32% in abnormal beat classification error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2800-2807
• /
• 2012

An ad-hoc wireless network provides self-organizing data networking while they are routing of packets among themselves. Typically multi-hop and control packets overhead affects the change of route of transmission. There are numerous routing protocols have been developed for ad hoc wireless networks as the size of the network scale. Hence the scalable routing protocol would be needed for energy efficient various network routing environment conditions. The number of depth or layer of hierarchical clustering nodes are analyzed the different clustering structure with topology in this paper. To estimate the energy efficient number of cluster layer and energy dissipation are studied based on distributed homogeneous spatial Poisson process with context-awareness nodes condition. The simulation results show that CACHE-R could be conserved the energy of node under the setting the optimal layer given parameters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.687-697
• /
• 2017

To figure out an appropriate pressure level for a body warming base layer, human responses were observed when the pattern reduction of base layers varied. Under the condition of $2^{\circ}C$, 60% RH, 0.1m/s, ten male subjects participated in the experiment with four sizes of experimental vests where heating pads were attached. The subjective evaluations of the heating vests with different sizes were reported using 7 or 9 point scales. We simultaneously observed chest, abdomen and scapula skin temperatures and microclimate humidity. It was found that the tight pattern as in the case of A or B provided a warmer subjective sensation and skin temperature than C or D; however, there were no differences in skin temperature at the chest. Eventually, the chest temperature decreased after about 30 mins of heating; however, temperature of abdomen increased and indicated that heating with two commercial pads used was inadequate for whole body warming. The pressure sensation of 'tight' was improved after warming the abdomen in a cold environment. Overall, the gaps beyond the original circumference of the abdomen, as in C or D, were not desirable for the local heating of abdomen under the conditions of this experiment where walking was included in the protocol. The experiment garment B with nude waist circumference was the best, and D with the largest ease, was the worst for a comfortable warming vest.