• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.11
• /
• pp.951-956
• /
• 2008

The high temperature creep properties of the generating plant's high temperature tube, pipe and header and such are very significant in accordance with long-time exposure to the high temperature and pressure environment. Not only this, but as the welding procedure is compulsory for the cohesion of components, the creep properties regarding the local microstructures of steel weldment are very important. In order to understand the creep properties regarding the local microstructures of steel weldment, the SP-Creep test which is easy to get sample from the field component was conducted. The local microstructure of steel weldment, that is, W.M. and B.M.'s microstructures were observed using the SEM. The rupture time of W.M. was longer as 110 % averagely in a same condition, which is the consequence of the difference of the microstructure. Each lethargy coefficient of B.M. and W.M. is evaluated by the relation among the temperature, load and the rupture time from SP-Creep Test. The life estimation equation can be induced by the transformation of Power-law. B.M. and W.M. for each $550\;^{\circ}C$ and $575\;^{\circ}C$, the very similar to normal temperature of the domestic thermal power generation in working, are estimated.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.11-21
• /
• 1999

This objective of this paper is to investigate the evaluation and indiction of human thermal comfort in building environment. The issue of defining the boundaries of acceptable thermal comfort conditions in buildings and urban may have significant implication for building design and also may have urban design by climate considerations. And then it is to apply the thermal comfort condition to environmental design by using passive methods in Korea. Since 1920. architects have conducted studies to measure thermal comfort in houses under hot and humid conditions, while industrial hygienists have studied the effects of temperature and humidity on the performance of factory workers. Thermal comfort can be influenced by many variables. This paper conducted to review the previous researches and the human heat balance equation, and to analyse in order to reveal the meaning and usage of the thermal comfort index in two traditional essays, Fanger's PMV and Gagge's ET* Their comfort indexes compared with each other. They were based on human heat balance equation and psychological and physiological responses in the laboratory tests. The researchers and the architectural engineers using thermal comfort index shall be careful in decided the use of indexes and be necessary to recognize the value concept of the design criteria for thermal comfort. Therefore, The opinion of the authors is that different comfort standards have to apply for each building and urban with different climatic conditions.

• Journal of Internet Computing and Services
• /
• v.7 no.5
• /
• pp.81-93
• /
• 2006

Recently, information technology is considered as a basement of management for industries as well as administrations. Especially, government agencies deal with more high sensitive and Important data than other businesses, so, their security managements should be fair and efficient. At present, most government agencies possess and operate their own information security systems, but apply them for the sake of formality only, even do not adapt an audit system for management polices. This paper presents a design and implementation of an automated audit system which is suitable for the operation environment in government agencies, using the audit system based on the BS7799. The. proposed system aims to objectively, numerically and daily control the ISMS (Information Security Management System) for different level of government agencies. In addition, it permits to design and implement an adaptive audit tool, in order to meet a given condition of audit organization and guard the personal relationship between the auditor and its counterpart.

• Research in Mathematical Education
• /
• v.9 no.3 s.23
• /
• pp.203-231
• /
• 2005

Students in East Asia have consistently out-performed their counterparts in the West in recent international studies of mathematics achievement. But some studies also show that East Asian students are more rigid in thought, and lack originality and creativity. While different theories have been proposed to account for these student performances, relatively few research studies have been done on classroom practices, potentially a major variable for explaining student performances. This paper will report on the results of two classroom studies: the TIMSS 1999 Video Study and the Learners' Perspective Study (LPS). Results the quantitative analysis of the TlMSS 1999 Video Study data show that the East Asian classrooms were dominated by teacher talk, and the mathematics content learned was abstract and unrelated to the real life. On the other hand, the characteristics of the instructional practices in Hong Kong as judged by an expert panel are that student learned relatively advanced mathematics content; the components of the lessons were more coherent, and the presentation of the lessons was more fully developed. Hong Kong students seemed to be more engaged in the mathematics lessons, and the. overall quality of the lessons was judged to be high. Results of the analysis of the LPS data also show that the classrooms in the East Asian city of Seoul were in general teacher dominated, but students were usually actively engaged in the mathematics learning. Emphasis on exploration of mathematics and practicing exercises with variation was common. It is argued that the quality teaching in the East Asian classrooms laid a firm foundation in mathematics for students, and that constitutes a necessary condition for the development of students' creativity. In order to fully develop the creativity of East Asian students, they need to be given the right environment and encouragement.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.307-315
• /
• 1989

In recent years, the fatigue design method by analysis for the mechanical components and the welded structures has much increased, instead of the fatigue design method by rule that has been widely used from the past days. When a fatigue design is conducted by that method, the basic informations, fatigue life curves are mainly obtained from the results of the strain controlled low cycle fatigue test. From these point of views, the low cycle fatigue test is coming to be given a much importance lately. In this paper, the strain controlled low cycle fatigue properties at room temperature in air environment were investigated for the low carbon forged steel, SF45A, and the rolled steel for the welded structure, SM 41B. Throughout the test, strain ratio, R, was maintained constant with the fully reversed condition, -1. As the experimental results, the cyclic stress-strain behaviours of the test materials were different each other, but the low cycle fatigue life-time of them appeared to show little difference in the region of this test conditions.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.553-556
• /
• 2009

This research aims at the recovery of valuable resource and more efficient waste treatment through solving the problem of pyrolysis technique. At first, in order to raise the economical efficiency, the low temperature pyrolysis experiment was carried out at the temperature of $450^{\circ}C$, which is lower than the common pyrolysis temperature area ($500{\sim}1000^{\circ}C$). We could lower the reaction temperature and reduce the reaction time by using catalyst. Also we used indirect heat for the purpose of maintaining favorable anoxic condition. As a result, we could raise the recovery rate of the valuable copper and synthetic fuel oil. Furthermore, the by-products and flue gas could be treated more effectively as well. The flue gas passed through two stage neutralization tank, so that dioxin hardly occurs and other environment items are controlled fairly well to the environmental standard. Throughout this study, we produced the low temperature pyrolysis equipment (GTPK-001) as mentioned above, and we found out that the technique can be commercialized economically as well as environmentally friendly.

• Korean Journal of Ecology and Environment
• /
• v.51 no.3
• /
• pp.245-252
• /
• 2018

Stable isotope tracers were first applied to evaluate the Microcystis cell assimilation efficiency of bivalves, since the past identification method has been limited to tracking the changes of each chl-a, clearity, and nutrient. The filter-feeders (Sinanodonta woodiana and Unio douglasiae) were assessed under the condition of cyanobacteria (Microcystis aeruginosa) blooms through an in mesocosm experiment using $^{13}C$ and $^{15}N$ dual isotope tracers. chl-a concentration in the treatment mesocosm was dramatically decreased after the beginning of the second day, ranging from 116 to $66{\mu}g\;L^{-1}$. In addition, the incorporated $^{13}C$ and $^{15}N$ atom % in the S. woodiana bivalve showed higher values than U. douglasiae bivalves. The results demonstrate that U. douglasiae has less capacity to assimilate toxic cyanobacteria derived from diet. Our results therefore also indicate that S. woodiana can eliminate the toxin more rapidly than U. douglasiae, having a larger detoxification capacity.

• Journal of Life Science
• /
• v.11 no.6
• /
• pp.530-536
• /
• 2001

Several bacterial strains utilizing crude oil as their sole carbon and energy source were isolated from marine environment polluted by crude oil. Among them, the selected strain 4A3 showed strong degradation activity for crude oil. This strain was identified as a Provindencia rettgeri 4A3 based on the morphological, biochemical, and physiological characteristics. The optimum cultural conditions was as follows; 26$^{\circ}C$ for temperature and 7.0 for initial pH. Additionally, the optimal concentration of sodium chloride was 2.0%, indicating that this strain was derived from sea water. The emulsifying activity of 4A3 was the highest after 3 days of cultivation under the condition of 2.0% sodium chloride, pH 7.0 and 26$^{\circ}C$. This strain had one cryptic plasmid in 7.0kb size.

• Journal of Embryo Transfer
• /
• v.28 no.1
• /
• pp.49-55
• /
• 2013

The objective of this study was to evaluate several types of uterine bacteria in Hanwoo. uterine bacteria from randomly selected 5 uterus was collected by flushing methods into a sterilized 1.5 ml centrifuge tube and was inoculated onto MacConkey agar and blood agar, respectively. After being incubated for 5% $CO_2$, aerobic or anaerobic condition at $37^{\circ}C$ during 48h, bacterial colonies were selected and re-inoculated onto blood agar plates. Re-cultured colonies were identified by Gram staining and finally identified using Vitek system. The identified bacteria were Staphylococcus lentus, Staphylococcus sciuri, Staphylococcus vitulinus, Staphylococcus warneri of Gram (+) and Rhizobium radiobacter, Sphingomonas paucimobilis of Gram (-) bacteria. Although, pathogenicity of identified bacteria was unclear, the bacteria can have an effect on the uterine microenvironment. Therefore, repetitive research will be required to determine the effects of bacteria in cattle exposed to a various environment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.446-455
• /
• 2017

The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance ($C_R$) in the total resistance ($C_T$) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.