• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.6
• /
• pp.13-20
• /
• 2018

Universal Soil Loss Equation (USLE) has been widely used to estimate potential soil loss because USLE is a simple and reliable method. The rainfall erosivity factor (R factor) explains rainfall characteristics. R factors, cited in the Bulletin on the Survey of the Erosion of Topsoil of the Ministry of Environment in the Republic of Korea, are too outdated to represent current rainfall patterns in the Republic of Korea. Rainfall datasets at one minute intervals from 2013 to 2017 were collected from fifty rainfall gauge stations to update R factors considering current rainfall condition. The updated R factors in this study were compared to the previous R factors which were calculated using the data from 1973 to 1996. The coefficient of determination between the updated and the previous R factors shows 0.374, which means the correlation is not significant. Therefore, it was concluded that the previous R factors might not explain current rainfall conditions. The other remarkable result was that regression equations using annual rainfall data might be inappropriate to estimate reasonable R factors because the correlation between annual rainfall and the R factors was generally unsatisfy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.144-151
• /
• 2008

The bi-modal vehicle is composed of two car-bodies and three axles. Each axle of the vehicle has an independent suspension and all wheels are steerable. Since the bi-modal vehicle has longer wheelbase than most urban buses, the All-Wheel-Steering(AWS) system is adapted for to ensure safe driving and proper turning radius on a curved road. This paper proposes an AWS control algorithm for stable driving of bi-modal vehicle. Steering angles and directions of each axle of bi-modal vehicle changed according to the driving environment and steering modes. In the case that front and rear axles should be steered in opposite directions is a negative mode, and the other case that the axles should be steered in the same direction is a positive mode. For example, in the positive mode, front and real axles are steered in the same direction, while in the negative mode, they are steered in the opposite direction. A multibody model of the vehicle is used to verify the performance of the steering algorithm and simulation results of 2WS are compared with those of AWS under the same condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.8-13
• /
• 2008

Emissions from automobiles have long been considered a prime source of pollutants involved in smog formation and ozone production. Especially VOCs are associated with serious environmental problems such as photo-chemical smog as well as human health effects. Since motor vehicles are a major source of VOCs, estimating of emission from mobile source is the most important factor to control VOCs. VOCs are emitted from various pollution like motor vehicles, mobile and stationary source that has characteristics of toxicity, cancer-causing, bio-accumulation, durability in air and diffusion can exert a bad influence upon human health and environment. However we don't have any standard or regulation about VOCs emissions. This study is summarized as VOCs emission characteristics from in-use light-duty diesel and LPG fueled vehicles. The vehicle exhaust-gas test mode is CVS cycle and nier-10 cycles that developed on EPA and National Institute of Environmental Research. TO-14 method (Toxic Organic) was chosen for VOCs analysis from EPA in USA. This study results will be useful when make a emission factor and rule making of emission standard about domestic VOCs emission for the improve to air condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.287-296
• /
• 2017

Although emission regulations have been gradually strengthened in the past decade, the road transport section remains the most important source of NOx emission in air pollution. One reason is that there has been an increase in the proportion of diesel vehicles and in the volume of traffic. In addition, the certification procedure for standard emission limit does not sufficiently reflect real traffic condition and various driving patterns. Therefore, the European Commission(EC) has recently come up with the RDE-LDV(Real driving emissions-light duty vehicle) regulations, and the Ministry of Environment in Korea has been conducting research on evaluating RDE-LDV with PEMS(Portable Emission Measurement Systems). According to the trip requirements of the 2nd RDE package announced by the EC, the objectives of the present study include the development of Korean RDE routes to reflect domestic traffic and road conditions. Based on the results, both RDE routes are in correct compliance with RDE-LDV regulations, including trip requirements and trip dynamics. KOR-NIER Route 1, in particular, has a higher driving load in rural driving with regard to excessive gradient of elevation compared to KOR-NIER Route 2, including relatively plane rural driving.

• Design & Manufacturing
• /
• v.7 no.1
• /
• pp.55-59
• /
• 2013

A Light Emitting Diode(LED) is a semiconductor device which converts electricity into light. LEDs are widely used in a field of illumination, LCD(Liquid Crystal Display) backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. In general, LEDs production does die bonding and wire bonding on board, and do silicon and phosphor dispensing to protect LED chip and improve brightness. Then lens molding process is performed using mixed liquid silicon rubber(LSR) by resin and hardener. A mixture of resin and hardener affect the optical characteristics of the LED lens. In this paper, computational design of static mixer was performed for mixing of liquid silicon. To evaluate characteristic of mixing efficiency, finite element model of static mixer was generated, and fluidic analysis was performed according to length of mixing element. Finally, optimal condition of length of mixing element was applied to static mixer from result of fluidic analysis.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.64-70
• /
• 2015

It has been 3 years since the TV broadcasting industry migrated to the UHDTV broadcasting service. Theoretically UHDTV picture quality is four times better than HDTV. UHDTV broadcast has been put to practical use by domestic broadcasters, excluding public broadcasters. The resolution of UHDTV does not correspond to the standard UHDTV values, the viewer have no choice but to watch existing contents on UHDTV. Therefore this paper analyses the current broadcast technology level for the image quality improvement, and to investigate the bandwidth of UHD broadcasts. In this paper we have studied current condition of HDMI interface technology and suggesting Super MHL interface technology capable of performing a successful establishment of the new broadcasting platform in future 8K UHD broadcasts alternatively. In order to improve the UHD broadcasting, we are expecting the development change of UHD broadcasting service user experience.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.95-99
• /
• 2017

The lifetime of a battery that supplies all the power required by a satellite in the eclipse is directly related to the lifetime of the satellite. Because the lifetime of the battery is influenced by the charging method of the battery, the power control unit that controls the charging of the battery should be designed in consideration of battery life. The battery charging is performed by controlling the charge current in the power control unit generated from the solar cell in the daytime. In order to prevent overcharge of the battery and for considering frequency of eclipse in each season, parameters related battery charging should be designed differently according to the season and to prevent over-current charging and over-voltage charging during charging, charge current is controlled by monitoring battery charge / discharge status, charge current amount, battery voltage, battery capacity, battery temperature and battery cell voltage. In satellite, tapering method is used to control charge current by reflecting each condition. In this paper, design battery charging algorithm of satellite power control unit using tapering charging method. convert the designed algorithm into a code that can be uploaded to satellites and verify the operation through testing in the established satellite environment.

• Journal of Food Hygiene and Safety
• /
• v.23 no.3
• /
• pp.276-283
• /
• 2008

To provide the research strategy for protection of children's health from hazardous chemical, we reviewed the hazardous chemicals can be exposed through maternity, children's life style and living environment. Recently, diseases related with children's living condition were focused as asthma, atopy, childhood developmental disability, congenital malformations and obesity. Children can be exposed to hazardous chemicals through an ambient air, water, soil, food, toys and other factors such as floor dust. Also children's health was deeply related with a wrong life style and neglectful caring by a lack of knowledge and information of harmful ones at parents and child care center's nursers. According to the previous study, the chemical risk factor of children's health were identified as inorganic arsenic, bisphenol A, 2,4-D, dichlorvos, methylmercury, PCBs, pesticide, phthalates, PFOA/PFOS, vinyl chloride, et al. Domestic studies for identification of causality between children exposure to chemicals and resulted hazardous effects were not implemented. The confirmation of chemical risk factors through simultaneously performing toxicological analysis, human effect study, environmental/human monitoring, and risk assessment is needed for good risk management. And also, inter-agency collaboration and sharing information can support confirming scientific evidence and good decision making.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.1-9
• /
• 2012

The purpose of this study is to present a methodology to effectively produce the e-learning contents in two platform types of PC based and mobile based platforms. Currently, the compatibility problem of flash technology widely used in the e-learning content production of existing PC based platform not supporting flash in some mobile platforms is being created while the condition of accompanying inconvenience in learning due to small screen and difference of input interface is being created in case of using the contents for PC even in case of the mobile platforms in which flash is supported. Considering this situation, this study is presenting a content development methodology that can provide services in both platform types based on standard technologies such as HTML 5. In conclusion, the methodology proposed in this study separates the content and the view of learning contents while supporting to enable content implementation using various forms of views based on the content database that has been constructed to show very efficiently characteristics in the content reuse and the multi platform support categories.

• The Journal of Pediatrics of Korean Medicine
• /
• v.24 no.2
• /
• pp.13-21
• /
• 2010

at Jeonju Wonkwang University Oriental Medicine hospital postpartum care center. Results The majority of women(79.2%) had planned breast-feeding. However, only 32.1% of women currently have fed breast-feeding. 58% of mothers who did partial breast-feeding and breast-feeding currently have planned to breast-feed more than 7 months. The main reason of bottle-fed is concern of insufficient amount of breast milk(72.2%). Also the main reason of breast-feeding is good for baby's health(90%). The average score on the test of the understanding about the methods and advantages of breast-feeding was $13.98{\pm}1.92$ out of total 18.49.1% of women thought that taking herbal medicine would affect baby during breast-feeding. Also 71.7% of women thought that herbal treatments (acupuncture, herbal medicine) would be helpful when the amount of breast milk is insufficient. Conclusions This survey has showed that in spite of full breast-feeding plan, the percentage of actual breast-feeding rate is low. Timely education is needed to increase breast-feeding rate. It is worth to consider herbal treatment to increase breast milk amount. In addition to that it is necessary to create a hospital environment in which mothers can easily begin breast-feeding as soon as possible after delivery. Moreover, beyond the medical field, political and social supports for breast-feeding are needed.