Design & Manufacturing
- Volume 7 Issue 1
- /
- Pages.55-59
- /
- 2013
- /
- 2800-0323(pISSN)
- /
- 2733-452X(eISSN)
A Study on the Computational Design of Static Mixer and Mixing Characteristics of Liquid Silicon Rubber using Fluidic Analysis for LED Encapsulation
LED Encapsulation을 위한 스태틱 믹서의 전산 설계 및 유동해석을 이용한 액상 실리콘의 혼합 특성에 대한 연구
- Cho, Yong-Kyu (Department of Mechanical Engineering, Inha University) ;
- Ha, Seok-Jae (Department of Mechanical Engineering, Inha University) ;
- Huxiao, Huxiao (Department of Mechanical Engineering, Inha University) ;
- Cho, Myeong-Woo (Department of Mechanical Engineering, Inha University) ;
- Choi, Jong Myeong (PROTEC Co. LTD.) ;
- Hong, Seung-Min (PROTEC Co. LTD.)
- 조용규 (인하대학교 기계공학과) ;
- 하석재 (인하대학교 기계공학과) ;
- 호소 (인하대학교 기계공학과) ;
- 조명우 (인하대학교 기계공학과) ;
- 최종명 ((주)프로텍) ;
- 홍승민 ((주)프로텍)
- Received : 2012.12.26
- Accepted : 2013.02.22
- Published : 2013.03.29
Abstract
A Light Emitting Diode(LED) is a semiconductor device which converts electricity into light. LEDs are widely used in a field of illumination, LCD(Liquid Crystal Display) backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. In general, LEDs production does die bonding and wire bonding on board, and do silicon and phosphor dispensing to protect LED chip and improve brightness. Then lens molding process is performed using mixed liquid silicon rubber(LSR) by resin and hardener. A mixture of resin and hardener affect the optical characteristics of the LED lens. In this paper, computational design of static mixer was performed for mixing of liquid silicon. To evaluate characteristic of mixing efficiency, finite element model of static mixer was generated, and fluidic analysis was performed according to length of mixing element. Finally, optimal condition of length of mixing element was applied to static mixer from result of fluidic analysis.
Keywords
- Light Emitting Diode;
- Encapsulation;
- Injection molding Static mixer;
- Fluidic analysis;
- Liquid silicon rubber(LSR)