• Korean Journal of Environment and Ecology
• /
• v.23 no.6
• /
• pp.535-544
• /
• 2009

This study was conducted to establish the selection criteria for the trees to be transplanted in the forest reserves which are expected to be developed in the future. The main task in this endeavor was to access the transplantability of the trees focused on their feature, diameter at breast height (D.B.H.), soil feature, etc. The selection of the trees for transplantation consisted of two stages. The first stage was to select trees on the basis of their indigenousness and forest successional stage. The second was to select trees on the basis of their type, D.B.H., the layers of soil, etc. At the first stage, the trees which are not indigenous or expected not to survive were eliminated from the selection list, and the result showed that approximately 5.9% (about 3,841 trees) of the trees proved to be inadequate for transplanting. At the second stage, the investigation of the trees based on the criteria of tree type, D.B.H., the layers of soil was carried out, and the result showed that approximately 33.7% (1,218) out of 3,613 trees turned out to adequate for transplanting however, 23.0% of the trees, which are 829 trees, were found to be impossible to transplant. In addition, it was discovered that in the case of approximately 43.3%(1,566 trees) of the trees there was little difference between transplanting cost and planting cost of new trees. Therefore the investigation indicated that it is more advisable to transplant trees to preserve the ecological environment. However, the study showed that there are other elements to be considered, such as tree feature and soil condition, for the successful tree transplantation, and the necessary information can be provided by the managing personnel who are in charge of the forest.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.3
• /
• pp.35-65
• /
• 1995

The development of Korean shipping industry is maybe defined into three development stages-industry fixing stage, industry coordinating stage, industry development stage-. The development of shipping industry has been depended on the geovernment/authority role such as shipping policy, system, law, rules and regulations. In 1983, Korean shipping industry reorganization and coordination by shipping authority have made our shipping industry on the stable condition together with each company's efforts. Today's world economic environment such WTO/UR negotiation results get this government role limited. According to the being reduced government role, each company's competitive advantage power becomes more important. Besides, korean shipping industry is exposed into the entire and bitter world competition. In order to win and prevent the world shipping competition, it is necessary to look out the competitive advantage power of Korean shipping industry. The first purpose of this study is the situation analysis for competitive advantage power of Korean shipping industry. The second is to compare with our shipping policies with foreign ones concerned with ship, cargo, crew, tax and others. But in order to compare with foreign shipping, this study need their shipping statistics data, this study has some limit of the foreign data. This study has been carried on the basis of the following items. 1. Shipping environment, 2. Ships and ship acquirement(shipbuilding/purchasing), 3. Oceangoing cargo and ship's stowage rate, 4. Human factor in shipping-crew, 5. The incomes and costs in finacial statements. We have some conclusions as following through the this study. First, Korean shipping industry environment-competitive disadvantage situation- has changed rapidly due to the shipping market opening, free market entering of foreign shipping. Second, Korean shipping is disadvantageous due to the high tax rate and financing conditions in connection with ship acquirement. In order to improve the competitive advantage power, the shipping tax system and ship financing conditions should be reviewed to profitable for owners. Third, but both world and Korean oceangoing cargoes quantity have been increased annualy, Korean ship's cargo stowage rate is being decreased. This is serious situation but Korean shipping take well use of foreign vessel with hire. It is recommended to take use of owner's vessel and hired ones in the long range view, considering the world shipping management. But the number of crew has been decreased by 2, 000~3, 000 annualy, it is desirable that the long sea-experienced crew have been increased. Almost of owners usauly complain the crew cost is the main obstacles to competitive advantage power. Human factor is the most important firm's asset. All owners should pay attention to this though, and invest the proper budget to training, education, welfare as much as possible. In the long run this effects could be feedback to owners. Fifth, We must improve the financial statements structure, that is, the first step is to increase income, the second is to decrease cost, the third is to increase income on the same cost, the fourth is to decrease cost on the same income. It is essential to find out what the urgent investment is and what unnecessary cost is. At last, in order to competite world shipping race, each shipping firm must try for himself to retain the power. The government/authority is no longer dependable. I believe that each firm's power will be the industry's power, the industry's power will be the nations's power.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.2
• /
• pp.121-128
• /
• 2006

In this study, the existing MSS facilities were investigated for examination the the present condition of MSS treatment system. There are 23 MSS treatment facilities across the country, In total facilities, 6 facilities have economical problems, and 2 facilities were stopped the operation of establishments for technical problems, and most facilities are suffering from environmental problems, for example, odor and waste water. These kinds of problems play a role as obstacle to treat MSS efficiently. Accordingly, to reform current MSS treatment system, a few adequate measures are required. First a Guide line, which is a manual for establishment of MSS treatment facilities efficiently and environmentally friendly, must be offered from the agencies concerned of the Ministry of Environment to local governments. Second, to devise a plan for MSS treatment, Ministry of Environment and all local governments should devise a long-range policy synthetically not fragmentarily and temporarily.

• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.1
• /
• pp.9-15
• /
• 1972

Comparative analyses of canopy structure were conducted using newly bred high yield rice cultivars (IR 667-Suwon 213 and 214) and commercial varieties (Jinhung and Paldal) under the field condition. "Canopy score" as criteria of canopy structure was proposed. The results were summerized as follows: 1. IR667 line (IR8${\times}$Taichung Native 1${\times}$Yukara) showed lower canopy height, greater tiller openness, smaller leaf openness and leaf length ratio (flag leaf/3rd), shorter 4th and 5th internode length, greater diameter of 5th internode, consequently greater leaf area index, panicle weight and leaf weight ratio (leaf/leaf sheathculm) as merits, and greater leaf width, smaller leaf number(number of leaf/$m^2$)and specific leaf area($cm^2/g$) and faster destruction of canopy by senescence as demerits comparing with commercial varieties. 2. IR 667 line showed much higher "Canopy score", subsequently higher yield. 3. The quality of individual leaf was better in the commercial varieties indicating that the best combination for the better yield would be the leaf of commercial varieties with the structure of IR667 line.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.288-302
• /
• 2017

Accurate measurement of benthic nutrient fluxes (BNF) is a prerequisite for evaluating the effect of sediments on nutrient cycle in the surface water. The intact sediment cores were collected in July 2015 at the midstream of Nakdong River. We identified pre-incubation time (6, 12, 24 hr), dissolved oxygen concentration (90, 70, 50% saturation), diffusive boundary layer thickness (0, 0.6-0.8, 1.2-1.4 mm), and incubation temperature (10, 17, 20, $25^{\circ}C$) as the most important control factors, and measured the BNF fluctuation with the variation of these factors using the laboratory sediment core incubation method. Since the chemical composition, redox condition, hydrodynamic regimes and microbial activities at the sediment-water interface were changed as a result of the alteration of control factors, sediment core incubation should be conducted under as close to the natural conditions of study site as possible, in order to produce the results similar to actual values. Relative percentage differences between two replicates were below 20% in most control factors, which showed satisfactory precision for strict compliance with the experimental conditions and procedures. In the further studies, we will compare the results of core incubation with those of in situ measurements to confirm the accuracy of the sediment core incubation method.

• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.757-767
• /
• 2015

Rock mass is an important engineering material. In hydropower engineering, rock mass of bank slope controlled the stability of an arch dam. However, mechanical characteristics of the rock mass are not only affected by lithology, but also joints. On the basis of field geological survey, this paper built rock mass material containing parallel concentrated joints with different dip angle, different number under different stress conditions by PFC (Particle Flow Code) numerical simulation. Next, we analyzed mechanical property and fracture features of this rock mass. The following achievements have been obtained through this research. (1) When dip angle of joints is $15^{\circ}$ and $30^{\circ}$, with the increase of joints number, peak strength of rock mass has not changed much. But when dip angle increase to $45^{\circ}$, especially increase to $60^{\circ}$ and $75^{\circ}$, peak strength of rock mass decreased obviously with the increase of joints number. (2) With the increase of confining stress, peak strengths of all rock mass have different degree of improvement, especially the rock mass with dip angle of $75^{\circ}$. (3) Under the condition of no confining stress, dip angle of joints is low and joint number is small, existence of joints has little influence on fracture mode of rock mass, but when joints number increase to 5, tensile deformation firstly happened at joints zone and further resulted in tension fracture of the whole rock mass. When dip angle of joints increases to $45^{\circ}$, fracture presented as shear along joints, and with increase of joints number, strength of rock mass is weakened caused by shear-tension fracture zone along joints. When dip angle of joints increases to $60^{\circ}$ and $75^{\circ}$, deformation and fracture model presented as tension fracture zone along concentrated joints. (4) Influence of increase of confining stress on fracture modes is to weaken joints' control function and to reduce the width of fracture zone. Furthermore, increase of confining stress translated deformation mode from tension to shear.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.606-614
• /
• 2020

The administrative ship, Chuja-ho, is the only mode of transportation between manned islands in the Chuja-do, Jeju. Chuja-ho is a 25-year-old age, which is identified to pass the persisting period (25 years) for public ships, and there is an urgent need for a replacement. The residents of the island are also requesting that the new administrative ship be outfitted with medical functions because there is no sea transportation system for medical emergencies in Chuja-do. The purpose of this study is to examine the required functions of a new administrative ship outfitted with medical functions and to suggest a conceptual design. In order to review the necessity of an emergency patient transport system, user requirements were surveyed and analyzed, and the ship's condition assessed by ship experts who carried out an on-site survey and analysis of ship survey data. Thereafter, a conceptual design for a new administrative ship with medical functions was presented. The results of this study can be used during a review of a new budget plan and for basic ship designs during the replacement project by the local government. It is also expected to improve the safety and medical environment of Chuja-do residents.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.789-800
• /
• 2013

$N_2O$ and $CH_4$, Greenhouse gas emission, Forest soil, Closed chamber technique, Soil uptake $N_2O$ and $CH_4$ are important greenhouse gases (GHG) along with $CO_2$ influencing greatly on climate change. Their soil emission rates are highly affected by bio-geo-chemical processes in C and N through the land-atmosphere interface. The forest ecosystems are generally considered to be net emission for $N_2O$; however, net sinks for $CH_4$ by soil uptake. Soil $N_2O$ and $CH_4$ emissions were measured at Mt. Taewha in Gwangju, Kyeonggi, Korea. Closed chamber technique was used for surface gas emissions from forest soil during period from May to October 2012. Gas emission measurement was conducted mostly on daytime (from 09:00 to 18:00 LST) during field experiment period (total 25 days). The gas samples collected from chamber for $N_2O$ and $CH_4$ were analyzed by gas chromatography. Soil parameters were also measured at the sampling plot. GHG averages emissions during the experimental period were $3.11{\pm}16.26{\mu}g m^{-2}hr^{-1}$ for $N_2O$, $-1.36{\pm}11.3{\mu}gm^{-2}hr^{-1}$ for $CH_4$, respectively. The results indicated that forest soil acted as a source of $N_2O$, while it acted like a sink of $CH_4$ on average. On monthly base, means of $N_2O$ and $CH_4$ flux during May (spring) were $8.38{\pm}48.7{\mu}gm^{-2}hr^{-1}$, and $-3.21{\pm}31.39{\mu}gm^{-2}hr^{-1}$, respectively. During August (summer) both GHG emissions were found to be positive (averages of $2.45{\pm}20.11{\mu}gm^{-2}hr^{-1}$ for $N_2O$ and $1.36{\pm}9.09{\mu}gm^{-2}hr^{-1}$ for $CH_4$); which they were generally released from soil. During September (fall) $N_2O$ and $CH_4$ soil uptakes were observed and their means were $-1.35{\pm}12.78{\mu}gm^{-2}hr^{-1}$ and $-2.56{\pm}11.73{\mu}gm^{-2}hr^{-1}$, respectively. $N_2O$ emission was relatively higher in spring rather than other seasons. This could be due to dry soil condition during spring experimental period. It seems that soil moisture and temperature mostly influence gas production and consumption, and then emission rate in subsoil environment. Other soil parameters like soil pH and chemical composition were also discussed with respect to GHG emissions.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.3
• /
• pp.184-191
• /
• 2011

Preliminary design of a mooring system for a floating wave energy converter(WEC) is performed. A mooring line is designed to consist of two parts; the one is a chain in heavy weight laid on the seabed and linked to an anchor on the seabed and the other is a light weight chain suspended at a floater. A high weight chain laid on the seabed can contribute to mitigate dynamic energy propagated from top oscillation and decrease anchor weight and volume. Through a low weight chain suspended between a floater and seabed the WEC's function to produce energy from wave can be affected in minimum by the motion of a chain. The static and dynamic analyses for the designed mooring system were carried out to evaluate WEC system's safety. The present study shows that the designed gravity anchor moves horizontally due to the tension exerted on the anchor in the severe ocean environmental condition. The present mooring system should be redesigned to satisfy the safety requirements. The present study will be useful to predict the safety of the mooring system under ocean environment.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.217-221
• /
• 2007

To provide the basic data essential for developing varieties of broad-leaved tree, the study investigated the utmost growth requirement for the growth characteristic and biomass production in accordance with planting density of Styrax obassia. The planting density of seedling can be a significant factor in contributing growth of seedling for tree growing in general. While growth of tree according to $1m^2$ planting density of Styrax obassia showed an excellent growth in tree height and the root collar diameter from $49no./m^2$, those low planting density showed decreased tendency with tree height growth while increasing the root collar diameter growth. As similar to the growth characteristic, the biomass production showed significant and statistic difference in $49no./m^2$, showing high volume of biomass production which is $3.12{\pm}0.80g$ compare to other processing section and high figure with T/R ratio which is 1.59. The special trait of photosynthetic also showed relatively high photosynthetic rate in $49no./m^2\;and\;64no./m^2$ of Styrax obassia and as the density increase, photosynthetic efficiency decreased. The plant showed stable and physiological planting pattern, displaying the best photosynthetic rate, which was the final metabolism through reserving proper space in the growth and development environment condition. This obstacle of required space essential for growth substantially deteriorated planting and ultimately, it demonstrated lower tendency of photosynthetic rate, which is the highest level of metabolism.