• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.89.3-89.3
• /
• 2017

Recent interferometric observations toward embedded protostellar systems show a clear offset between the emission peaks of N2D+ and N2H+. However, the chemical model that con-siders solely freeze-out and desorption from the dust grains could not reproduce the ob-servations. This difference between two spe-cies in the depletion zone might be caused by the reduction of the deuterated molecules, due to the reactions on grain surfaces. We present that the abundance offset between N2H+ and N2D+ can be explained if the chemi-cal model includes the surface chemistry, especially for the deuterated.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.102-110
• /
• 2006

We discuss two possibilities of using femtosecond pulse lasers as a new interferometric light source for enhanced precision surface-profile metrology. First, a train of ultra-fast laser pulses yields repeated low temporal coherence, which allows unequal-path scanning interferometry, which is not feasible with white light. Second, the high spatial coherence of femtosecond pulse lasers enables large-sized optics to be tested in nonsymmetric configurations with relatively small-sized reference surfaces. These two advantages are verified experimentally using Fizeau and Twyman-Green type scanning interferometers.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.135-144
• /
• 1998

High speed machining is a key issue in die and mold manufacturing recently. Even though this technology has great potential of high productivity. tool wear accelerated by high cutting speed to the hardened materials is other barrier. In this research, we attempted to reduce tool wear by considering tool inclination angle between tool and workpiece. The boundary lines describing machined sculptured surfaces were represented by both of cutting envelop condition and the geometric relationship of successive tool paths. Chip cross section, and cutting length could be obtained from the calculated cutting edge and the rotational engagement angle. From the simulation results, machining inclination angle of tool of $15^\circ$ was good enough from the point of tool wear and cutting force, and this value was verified through the cutting experiment of high speed ball end milling.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.204-207
• /
• 2005

We discuss two possibilities of using femtosecond pulse lasers as a new interferometric light source fer enhanced precision surface profile metrology. First, a train of ultra-fast laser pulses yields repeated low temporal coherence, which allows performing unequal-path scanning interferometry that is not feasible with white light. Second, high spatial coherence of femtosecond pulse lasers enables to test large size optics in non-symmetric configurations with relatively small size reference surfaces. These two advantages are verified experimentally using Fizeau and Twyman-Green type scanning interferometers.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.2
• /
• pp.173-177
• /
• 2006

In this study, a novel strategy was developed for the highly selective immobilization of proteins, using the polyhydroxyalkanoate (PHA) depolymerase substrate binding domain (SBD) as an active binding domain. In order to determine the appropriacy of this method for immunodiagnostic assays, the single-chain antibody (ScFv) against the hepatitis B virus (HBV) preS2 surface protein and the severe acute respiratory syndrome coronavirus (SARS-CoV) envelope protein (SCVe) were fused to the SBD, then directly immobilized on PH A-coated slides via microspotting. The fluorescence-labeled HBV antigen and the antibody against SCVe were then utilized to examine specific interactions on the PHA-coated surfaces. Fluorescence signals were detected only at the spotted positions, thereby indicating a high degree of affinity and selectivity for their corresponding antigens/antibodies. Furthermore, we detected small amounts of ScFv-SBD (2.7 ng/mL) and SCVe-SBD fusion proteins (0.6ng/mL). Therefore, this microarray platform technology, using PHA and SBD, appears generally appropriate for immunodiagnosis, with no special requirements with regard to synthetic or chemical modification of the biomolecules or the solid surface.

• The Korean Journal of Zoology
• /
• v.31 no.3
• /
• pp.165-176
• /
• 1988

Stmcturai changes at the surfaces of oocytes of Pseudopotamilla occelata were examined by electron microscopy. The oocytes, which grow up to the flnai stage in the same coelomic fluid, once released from the ovary at 5 $\mu$ m stage, change in the structure of the vitelilne envelopes. Microvilli were found to change gready in structure, abundance and behaviour dudng oogenesis. Microvilli are short and bifurcated at the previtellogenic stages and grow in size, but the number increases only during previtellogenesis but decreases during vitellogenesis. Glycocaiyx structures begin to form at the tips of microvitli at the early previtellogenic stages and become more abundant as oocytes grow and remain at the final stage of oogenesis. The tips of microvilli are separated from the stems at the late vitellogenic stages to form vesicles simultaneously with retraction of the microvilli. Vitelline envelope consists of outer, intermediate and inner layers at the previtellogenic stages. However, the inner layer becomes thickened and differendated into two sublayers at 80 $\mu$m stage, - while the outer and intermediate layers remain constant in the thickness. These structural changes were presumably the results of functional differentiation of the vitelline envelope throughout oogenesis even in the same milleu.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1229-1239
• /
• 2005

Human immunodeficiency virus-like particles (HIVVLPs) with native conformations similar to that of the wild-type virion could be valid candidates for vaccine development. To this end, we used a Semliki Forest Virus (SFV) expression system to produce HIV- VLPs containing high quantities of native envelope proteins. Here, we described a single SFV replicon containing the HIV gagpol and env genes under the control of separate subgenomic promoters. Mature VLPs incorporating the Gag and Env proteins were detected in the supernatant of replicon-expressing cells by Western blot analysis. The HIV-VLPs showed the expected molecular density (1.14-1.18 g/ml) on a $20-60\%$ sucrose gradient; the particles were 100-120 nm in diameter and Env proteins were observed on their surfaces by immunogold electron microscopy. RT-PCR analysis of VLP-associated RNAs in mature HIV-VLPs revealed two SF V-derived RNA species (full-length and subgenomic). Immunization studies in Balb/c mice showed that these HIV-VLPs were capable of inducing both HIV-specific antibodies and cell-mediated immune responses. Taken together, our results indicate that the SFV replicon system is useful for the production of HIV-VLPs, which may be valuable candidates for an HIV vaccine.

• The Korean Journal of Malacology
• /
• v.2 no.1
• /
• pp.10-12
• /
• 1986

Pettancylus nipponicus (freshwater limpet) collected from the Lake Choon Cheon were cultrued in aquarium and studied in the respects of an egg deposition and the developmental characters of cleavage. The species were collected only in the Lake Uiam and Choon Cheon and easily sampled on the debris like vinyls and cans. Those smooth surfaces were suitalble substrata for attaching. P. nipponicus, about 4 mm in adult, deposited an egg in one calcareous egg-capsule on the aquarium walls, while many eggs are surrounded in a jelly-like egg-envelope in the most gastropods. And another special features was that an egg-capsule was consisted of two valves and the suture was opended as hatching. A diameter of its egg was $55{{\mu}m}$ and the length of an egg capsule was $620{{\mu}m}$ and $510{{\mu}m}$ in long and short diameter, respectively. It took about 8 hours from beginning cleavage to 16-cell stage and about one year to become an adult.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1571-1578
• /
• 2020

As a critical material in very/high-temperature gas-cooled reactors, graphite material directly affects the safety of the reactor core structures. Owing to the complex structures of graphite material in reactors, the material typically undergoes complex stress states. It is, therefore, necessary to study its mechanical properties, failure modes, and strength criteria under complex stress states so as to provide guidance for the core structure design. In this study, compressive failure tests were performed for graphite material under the condition of different confining pressures, and the effects of confining pressure on the triaxial compressive strength and Young's modulus of graphite material were studied. More specifically, graphite material based on the fracture surfaces and fracture angles, the graphite specimens were found to exhibit four types of failure modes, i.e., tension failure, shear-tension failure, tension-shear failure and shear failure, with increasing confining pressure. In addition, the Mohr strength envelope of the graphite material was obtained, and different strength criteria were compared. It showed that the parabolic Mohr-Coulomb criterion is more suitable for the strength evaluation for the graphite material.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.11
• /
• pp.1729-1738
• /
• 2020

Salmonellosis is a form of gastroenteritis caused by Salmonella infection. The main transmission route of salmonellosis has been identified as poorly cooked meat and poultry products contaminated with Salmonella. However, in recent years, the number of outbreaks attributed to contaminated raw produce has increased dramatically. To understand how Salmonella adapts to produce, transcriptomic analysis was conducted on Salmonella enterica serovar Virchow exposed to fresh-cut radish greens. Considering the different Salmonella lifestyles in contact with fresh produce, such as motile and sessile lifestyles, total RNA was extracted from planktonic and epiphytic cells separately. Transcriptomic analysis of S. Virchow cells revealed different transcription profiles between lifestyles. During bacterial adaptation to fresh-cut radish greens, planktonic cells were likely to shift toward anaerobic metabolism, exploiting nitrate as an electron acceptor of anaerobic respiration, and utilizing cobalamin as a cofactor for coupled metabolic pathways. Meanwhile, Salmonella cells adhering to plant surfaces showed coordinated upregulation in genes associated with translation and ribosomal biogenesis, indicating dramatic cellular reprogramming in response to environmental changes. In accordance with the extensive translational response, epiphytic cells showed an increase in the transcription of genes that are important for bacterial motility, nucleotide transporter/metabolism, cell envelope biogenesis, and defense mechanisms. Intriguingly, Salmonella pathogenicity island (SPI)-1 and SPI-2 displayed up- and downregulation, respectively, regardless of lifestyles in contact with the radish greens, suggesting altered Salmonella virulence during adaptation to plant environments. This study provides molecular insights into Salmonella adaptation to plants as an alternative environmental reservoir.