• Microbiology and Biotechnology Letters
• /
• v.9 no.4
• /
• pp.197-205
• /
• 1981

Penicillin amidase of Bacillus megaterium was recovered from the fermentation broth by adsorption on celite and immobilized by entrapping the adsorbed enzyme in acrylamide gel. The operational stability in column reactor was greatly increased by entrappment as compared with that of without entrappment. The optimum pH of the immobilized enzyme was 8.7 with broader activity profile than that of the free enzyme, while the most stable pH range appeared to be between pH 7.5 and 8.0. The optimum temperature was shifted to 5$0^{\circ}C$ from 45$^{\circ}C$ for the soluble enzyme. The values of Km and the inhibition constants for 6-APA( $K_{ia}$ ) and phenylacetic acid ( $K_{ip}$ ), were 4.55 mM, 36.5mM, and 10.5mM, respectively. No significant internal pore diffusion limitation was found since the value of effectiveness factor was 0.95. The operational half life in a column reactor at pH 8.0 was 6.8 days at 4$0^{\circ}C$ and 47 days at 3$0^{\circ}C$, whereas that of without entrappment was only 1 day and 4 days, respectively. The performance of a batch and a column reactor was also discussed with respect to the productivity. The results demonstrated that the entrappment of an adsorbed enzyme for the enhancement of the operational stability of the immobilized enzyme was useful especially when an extracellular enzyme was used.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.636-643
• /
• 1999

Green-emission intensity of a $Zn_{2-x}Mn_xSiO_4$ phosphor, which is a potential candidate as a green component in PDP device, significantly increases provided that the compound is additionally heat treated at 900$^{\circ}C$ after solid state reaction at 1300$^{\circ}C$. In order to verify origin of such an intensity enhancement after the additional heat treatment in association with the electronic and local structural change at around Mn ions, the Mn K-edge X-ray absorption spectra were recorded. From the analyses of the preedge peak corresponding to $1s{\rightarrow}3d$ bound state transition and XANES spectrum, it is known that most Mn ions are in +2 oxidation state and substitute Zn ion site regardless of the thermal treatment. In addition, EXAFS analyses revealed that Mn ions formed $MnO_4$ tetrahedra with the Mn-O bond length shortened by 0.01${\AA}$ and with reduced Debye-Waller factor in the thermally treated sample.

• Tuberculosis and Respiratory Diseases
• /
• v.67 no.1
• /
• pp.8-13
• /
• 2009

Background: The insulin receptor substrate-1 (IRS-1) is the primary docking molecule for the insulin-like growth factor I receptor (IGF-IR), and is required for activation of the phosphatidylinositol 3'-kinase (PI3K) pathway. IRS-1 activation of the (PI3K) pathway regulates IGF-mediated survival, enhancement of cellular motility and apoptosis. Therefore, we attempted to ascertain whether IRS-1 genetic variations affect an individual's risk for non-small cell lung cancer (NSCLC). Methods: Two-hundred and eighteen subjects, either diagnosed with NSCLC or control subjects, were matched by age, gender and smoking status. Genomic DNA from each subject was amplified by PCR and analyzed according to the restriction fragment length polymorphism (RFLP) profile to detect the IRS-1 G972R polymorphism. Results: The frequencies of each polymorphic variation, in the control population, were as follows: GG=103 (94.5%) and GR=6 (5.5%); for the NSCLC subjects, the genotypic frequencies were as follows: GG=106 (97.2%) and GR=3 (2.8%). We could not demonstrate statistically significant differences in the genotypic distribution between the NSCLC and the control subjects (p=0.499, Fisher's Exact test). The relative risk of NSCLC, associated with the IRS-1 G972R polymorphic variation, was 1.028 (95% CI; 0.63~9.90). In addition, we found no differences between polymorphic variants with regard to the histological subtype of NSCLC. Conclusion: We did not observe any noteworthy differences in the frequency of the IRS-1 G972R polymorphism in NSCLC patients, compared to control subjects. These results suggest suggesting that, in our study population, the IRS-1 G972R polymorphism does may not appear to be associated with an increased risk of NSCLC.

• Journal of Life Science
• /
• v.18 no.11
• /
• pp.1471-1478
• /
• 2008

In this study, nitric oxide (NO) production in a macrophage-lymphocyte co-culture system was used to assess the cytokine producing capability of cells during endotoxin tolerance in mice. Incubation of peritoneal macrophages with interferon-$\tau$ (IFN-$\tau$) in the presence of lipopolysaccharide (LPS) augmented NO synthesis. Exogenous tumor necrosis factor-$\alpha$(TNF-$\alpha$) could also replace LPS for the stimulation of NO production. Macrophages co-cultured with splenic lymphocytes showed augmented NO synthesis by LPS alone. However, pretreatment of mice with 2.5 mg/kg LPS completely prevented the lethality and the increase of blood TNF-$\alpha$ and IFN-$\tau$ after the second challenge with a lethal dose of LPS. In addition, when macrophages prepared from LPS-tolerant mice were co-cultured with normal splenocytes, LPS also could not induce the production of NO, even in the presence of exogenous TNF-$\alpha$. Moreover, when normal macrophages were co-cultured with splenocytes obtained from LPS-tolerant mice, stimulation with LPS could not evoke the NO production enhancement. However, this down-regulation was able to reverse by exogenous IFN-$\tau$ or concanavalin A (ConA), a stimulator of IFN-$\tau$ production. Our results indicate that not only macrophages but also lymphocytes contribute to LPS tolerance. As INF-$\tau$ can enhance the expression of TNF-$\alpha$, the decrease of INF-$\tau$synthesis from lymphocytes may orchestrate with the decrease of TNF-$\alpha$ synthesis from LPS-tolerant macrophages for the production of tolerant state and the prevention of excessive inflammation. Therefore, LPS tolerance may be exploited for prophylaxis of severe sepsis in patients at risk.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.134-144
• /
• 2010

In China, the enhancement of water services has become the most crucial issue confronted with the rapid urbanization and industrialization process. A huge financial gap to meet the demand for water infrastructure and need for adopting advanced operation technology precipitated the rapid growth of PPP over the last 10 years. Diverse schemes of PPP such as TOT, Divestiture, and Management Contract and Lease have been practiced. Local governments and private investors/operator have adjusted their objectives and strategies to avoid potential pitfalls behind BOT projects in China. However, current academic research outcomes do not properly reflect important issues of BOT projects or related case studies in China. This limitation has brought in the lack of assessment of important risks and success factors required for the improvement of the body of risk management. In this regard, this study uses the market analysis method to identify major schemes of PPP water projects and conducts case studies on five PPP projects to identify key risk and success factors in association with each different scheme. It is expected that the risk and success factors identified from the cases will be used as reference to Korean companies which plan to enter the Chinese water market.

• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.552-563
• /
• 2015

The characteristics of ichthyofauna and fish community in Lake Goesan were examined from April 2010 to October 2012. During the survey period thirty six species belonging to 11 families were collected. Dominant species by number were Hemibarbus labeo (29.9%) and Zacco platypus (20.0%). In biomass, the dominant species were H. labeo (37.2%) and Carassius auratus (17.9%). Also, fourteen Korean endemic fish species (38.9%) and one endangered species (Acheilognathus signifer) were collected. Further, one catadromous species was observed for stock enhancement (Anguilla japonica), in addition to two land-locked anadromous species (Hypomesus nipponensis, Plecoglossus altivelis) and three exotic species (Cyprinus carpio (Israeli type), C. cuvieri, Micropterus salmoides). According to the length-weight relation of C. auratus and M. salmoides, the b values were 3.13~2.99, 3.11~2.99, showing a declining tendency annually. However, for H. labeo and Z. platypus, the b values were 2.98~3.07, 3.06~3.23 respectively, showing an increasing trend. The slope values for C. auratus and M. salmoides population conditions were controlled by K factor showing a tendency to decrease, but H. labeo and Z. platypus were showing a tendency to gradually increase.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.3
• /
• pp.53-61
• /
• 2016

Solar assisted heat pump system uses solar thermal energy as a heat source of evaporator of heat pump. So, COP can be enhanced as well as collector efficiency. For improving performance of this system, some research about hybrid solar collector that has fin-and-tube heat exchanger has been conducted. This collector can get a thermal energy from ambient air for liquid heating, so heated liquid can be used as a heat source of evaporator in heat pump even the solar radiation is not enough. In this study, numerical analysis was conducted for confirming heat gain of liquid according to fin height and pitch of fin-and-tube heat exchanger in collector. As a result, higher heat gain was obtained on lower fin height and narrow fin pitch, but the pressure drop also increased with increment of heat gain. Thus the JF factor considering both heat transfer enhancement and pressure drop was investigated and the maximum value was shown when the fin height and pitch were 40mm and 45mm. So it is considered that this installation condition has a highest heat transfer improvement when comparing with pressure drop. However heat gain of liquid at this condition was less than the other installation conditions of fin pitch on same height. Then, after establishing a proper minimum heat gain of liquid, actual production and experiment of collector will be conducted with fin height and pitch showing maximum JF factor and satisfying selected minimum heat gain of liquid on the basis of results of this study.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.2
• /
• pp.33-43
• /
• 2018

PV/Thermal module is the combined system, which consist of a photovoltaic module and solar thermal collector that can obtain electrical power and thermal energy simultaneously. Thus the power generation can be increase by decreasing the temperature of photovoltaic module and thermal energy retrieved from module also can be used for heating system. In this study, Heat transfer performance of air type PV/Thermal module was confirmed with various bottom obstacles that can be installed easily to real photovoltaic module by CFD (computational fluid dynamics) analysis. Eight type obstacles were investigated according to the shape and arrangement. As a result, nusselt number represent heat transfer performance was increased about 86% compare with the basic type PV/Tthermal module that has no obstacle and triangle type obstacle had higher value than other types. But pressure drop was also increased with increment of heat transfer enhancement. Thus the performance factor considering both heat transfer and pressure drop was confirmed and V-fin type obstacle arranged in a row for Reynolds number below 9,600 and protrusion type obstacle arranged in zigzag for Reynolds number above 14,400 were shown higher performance factor than other types. From these results, V-fin type obstacle arranged in row and protrusion type obstacle arranged in zigzag were considered as a proper type for applying to real PV/thermal module according to operating condition. But the heat transfer performance can be changed by the geometric conditions of obstacle such as height, width, length and arrangement. Thus, it could also confirmed that the optimal condition and arrangement of this obstacle need to be found in further study.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.5
• /
• pp.11-19
• /
• 2017

The purpose of this study is to analyze the efficiency of PV according to installation condition in the complex type buildings. For this purpose, annual performance of solar power generation in a certain area was investigated and various methods were conducted including post operation evaluation. In addition, we tried to find out influencing factors that affect the efficiency and sought to identify their relative impact of degree through the data analysis and site visits together. In the middle of this process we can draw up major considerations for the efficient photovoltaic power generation installation. In the mean while, previous studies are making something new related with method for efficiency enhancement and individual influential factors based on experimental environment rather than the empirical data site based. As a result of the study, it was confirmed that even if installed in the same area, the power generation efficiency is 1.5 times as high as the installation condition. Furthermore, statistical analyses were performed on azimuth, tilted angle and shade, which are variables affecting conversion efficiency, and it was statistically confirmed that all variables are meaningful factors that affect the conversion efficiency which is a dependent variable. The most influential factor is the azimuth, followed by the tilted angle and the shade factor. From this result, we expect to be able to provide installation guidelines for the solar power generation equipments on the rooftop zone.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.84-93
• /
• 2016

Plant factories with artificial lights require a large amount of electrical energy for lighting; therefore, enhancement of light use efficiency will decrease the cost of plant production. The objective of this study was to enhance the light use efficiency by using filters to diffuse the light from LED sources in plant factory conditions. The two treatments used diffuse glasses with haze factors of 40% and 80%, and a control without the filter. For each treatment, canopy light distribution was evaluated by a 3-D ray tracing method and canopy photosynthesis was measured with a sealed acrylic chamber. Sixteen lettuces for each treatment were cultivated hydroponically in a plant factory for 28 days after transplanting and their growth was compared. Simulation results showed that the light absorption was concentrated on the upper part of the lettuce canopy in treatments and control. The control showed particularly poor canopy light distribution with hotspots of light intensity; thus the light use efficiency decreased compared to the treatments. Total light absorption was the highest in the control; however, the amount of effective light absorption was higher in treatments than the control, and was highest in treatment using filters with a haze factor of 80%. Canopy photosynthesis and plant growth were significantly higher in all the treatments. In conclusion, application of the diffuse glass filters enhanced the canopy light distribution, photosynthesis, and growth of the plants under LED lighting, resulting in enhanced the light use efficiency in plant factory conditions.