• 대한환경공학회지
• /
• 제31권8호
• /
• pp.673-678
• /
• 2009

2011년부터 시행될 2단계 수질 오염 총량제에 대비하여 고효율 인 제거 공정 개발이 필요하며 본 연구에서는 생물학적 처리와 화학적 응집처리를 조합한 공정이 대안으로 검토되었다. 2세대 응집제로서 최근 많이 사용되고 있는 PAC(poly aluminum chloride)를 이용하고 실제 하수종말처리장 A2O 공정의 호기조 유출수를 시료로 하여 인 응집 특성 및 적정 조건, 효율 향상 방안 등에 대해 실험연구를 수행하였다. 먼저 적정 PAC 투입 농도는 부피기준으로 30 ppm, mol비로는 2.81 mol Al/mol P인 것으로 나타났다. 단순침전에서 17.2%에 불과하던 용존성 인의 제거율이 PAC 10 ppm 투입으로 30.3%까지 증가하였으며, 20 ppm에서 30 ppm으로 PAC 투입량을 증가시킬 때 49.3%에서 88.4%로 제거율을 크게 향상시킬 수 있었다. 이때 총 인의 제거율은 92.4%, 유출수 총 인 농도는 0.3 mg/L로 총량제에 부합하는 방류수 수질을 달성할 수 있었다. 적정한 응집시간은 4분, 침전시간은 20분, 초기 pH는 7로 나타났고 원시료 (pH 7.0)는 별도의 pH 조절 없이 응집 가능한 것으로 판단되었다. pH 7 조건에서 용존성 인의 제거가 크게 향상되었으며, 추가적인 확인 연구가 필요하나, 이는 인의 경우 $Al(OH)_3$에 의한 sweep floc formation이 주요 제거 기작임을 의미하였다. 2차침전조 유입부에 PAC를 투입하여 2차침전조를 응집침전조로 활용하는 방안과 별도의 응집침전조를 2차침전조 후단에 설치하여 PAC를 투입하는 방안을 비교한 결과 PAC 투입량 대비 인 제거효율 증진 관점에서 후자가 바람직한 것으로 조사되었다. 이때 처리수의 인 농도는 0.18 mg/L, 제거율은 95.4%로 향상시킬 수 있었다. 끝으로 응집 처리수를 반송할 경우 인 제거 효율을 높일 수 있었으며 적정 반송율은 0.3인 것으로 분석되었다.

• Environmental Engineering Research
• /
• 제19권2호
• /
• pp.151-155
• /
• 2014

This study compares the effects of flow on oil and suspended solids removal efficiencies in circular enhanced gravity plate separator equipped with coalescence medium. Coalescence medium acts to capture rising oil droplets and settling solid particles and assist in the coalescence of oil and coagulation of solid. The circular separator uses an upflow center-feed perforated-pipe distributor as the inlet. The co-current flow is achieved using 4 increasing sizes of frustum, whereas cross flow uses inclined coalescence plates running along the radius of the separator. The different arrangement gave the cross flow separator a higher coalescence plan area per operational volume, minimal and constant travelling distance for the oil droplets and particles, lower retention time, and higher operational flowrate. The cross flow separator exhibited 6.04% and 13.16% higher oil and total suspended solids removal efficiencies as compared to co-current flow.

• 멤브레인
• /
• 제17권3호
• /
• pp.219-232
• /
• 2007

침지침강 상변환법으로 폴리에테르설폰$(PES)-TiO_2$ 복합막을 제조하였다. 14 wt% 및 20 wt%의 PES/NMP 기준 고분자 용액에 $TiO_2$ 나노입자를 PES에 대해 $0{\sim}60$ wt%로 첨가량을 달리하여 복합막 제조에 사용될 캐스팅 용액을 준비하였다. 제조된 $PES-TiO_2$ 복합막의 막 특성과 몰폴로지를 $TiO_2$ 첨가량에 따른 캐스팅 용액의 점도, coagulation value, 광투과도와 복합막의 인장강도, 세공크기 및 접촉각, 표면 및 단면 SEM 사진, BSA 용액의 한외여과 실험을 통해 규명하였다. 캐스팅 용액에 첨가시킨 $TiO_2$ 입자의 함유량이 증가함에 따라 점도는 증가하고 coagulation value는 낮아져 캐스팅 용액의 열역학적 불안정성이 증가하였다. $TiO_2$ 입자의 첨가량이 증가함에 따라 1) 순간분리의 침강형식을 유지하면서 침강속도가 빨라졌으며, 2) 순수투과량, 세공크기 및 압밀화 안정성이 증가하며, 3) 인장강도와 접촉각은 감소하였다. $PES-TiO_2$ 복합막의 BSA 용액에 대한 전량여과식 한외여과 실험결과 $TiO_2$ 입자의 함유량이 증가함에 따라 막의 친수화 특성이 증가하여 투과플럭스가 증가하였으며, $TiO_2$가 첨가되지 않은 막과 비교하여 최대 7배까지 투과 플럭스가 향상되었다.

• Journal of Electrochemical Science and Technology
• /
• 제8권1호
• /
• pp.35-42
• /
• 2017

In this study, the effect of electrolyte addition on the removal of organics and nutrients in electrochemical wastewater using a copper electrode, and the characteristics of the by-product of electrolysis were investigated. The removal of organics increased significantly as shorter reaction times upon the addition of chloride ion, and most of the electrolysis reaction was completed within 20 min. The reaction rate gradually increased in proportion to the $Cl^-$/COD ratio, whereas the highest removed mass of organic matter per mass of added electrolyte was observed at a $Cl^-$/COD ratio of 1. After the addition of electrolyte, significant removal of ammoniacal nitrogen was observed as a result of the enhanced generation of oxidizers such as hypochlorite. Excellent phosphorus removal was also achieved in a very short reaction time (within 2 min) by electro-coagulation. As the electrolysis progressed, the amount of by-product increased gradually, whereas a decrease of sludge volume index was observed after the addition of electrolyte. This indicated that the settling performance of the by-products was better, and their removal would be easily achieved.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.216-221
• /
• 2010

Polyvinyl acetate (PVAc) prepared by emulsion polymerization has broad applications for additive such as paint binder, adhesive for wood and paper due to its low glass transition temperature which help to plasticize substrate resins. Since emulsion polymerization has a disadvantage that surfactant and ionic initiator degrade properties of the product polymer, poly (vinyl acetate-eo-ethyl acrylate) (VAc-EA) was synthesized using potassium persulfate as catalyst and polyvinylalcohol (PVA) as protective colloid to prevent the degradation. The copolymer latex product was internally plasticized and has enhanced adhesion, water resistance during VAc-EA emulsion polymerization. No coagulation and complete conversion occur with the reactant mixture of 10 mmol/L potassium persulfate, 10 mmol/L poly ( vinyl alcohol) (PVA 17). As the concentrations of PVA increase, the viscosity becomes increase.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.322-330
• /
• 2014

The phospholipid-based MPCE(2-Methacryloxyethyl Phosphoryl Chlorine) copolymer was mixed with wet polyurethane for coating of nylon fabrics. The substitution rate of water in coagulation bath with DMF was changed under control of the size of formed hydrophilic microporous cell enable to manufacture excellent breathable, anti-bacterial and moisture control fabrics. Biocompatible property, vapor permeability, hydrostatic pressure, moisture management and anti-bacterial property were investigated for treated nylon fabrics. In result, increased moisture transmission rates, decreased water resistance and outstanding moisture control property could be confirmed by enhanced hydrophilicity of wet-coated nylon fabric with MPCE copolymer.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.63-67
• /
• 2009

m-Aramid dissolved in N,N-dimethylacetamide (DMAc), were coagulated in different coagulants such as water, methanol, ethanol, propanol and butanol. Various concentrations and temperatures of the coagulants were also used to evaluate dyeing properties of coagulated m-aramid films. Field emission scanning electron microscopy (FE-SEM) was employed to investigate the surface morphology of m-aramid films. Wide angle X-ray diffraction (WAXD) was conducted in order to measure crystallinity change of mcaramid fibers and films. WAXD patterns showed that crystallinity of m-aramid fibers was reduced after film formation. In addition, color depth (K/S value) was measured and the results revealed that the film coagulated in water possessed fairly enhanced color depth.

• 한국환경보건학회지
• /
• 제31권4호
• /
• pp.246-253
• /
• 2005

The supernatant treatment of recovery process of raw materials of paper plant was studied using DAF (Dissolved Air Flotation) system. We investigated the removal efficiency (COD, SS and turbidity) of the DAF process. The effects of parameters such as A/S ratio, pressure, flotation conditions, coagulant concentration, mixing conditions, size and ratio of packing and nozzle type were examined. The results showed that the optimum A/S ratio and pressure were 0.058 and 4.5-5 atm, respectively. Injection times of pressurized water around 30 s and flotation times around 10 min appeared to be optimal for the DAF operation. Anion polymer addition improved the removal of COD, SS and turbidity. The smaller size and the more packing ratio were enhanced the removal efficiencies. The order of performance of nozzle was full cone > flat > assemble type.

• Journal of Chest Surgery
• /
• 제44권1호
• /
• pp.72-75
• /
• 2011

Aortic thrombi are important because it can cause the central and peripheral embolizations. Aortic thrombi can occur anywhere in the aorta but extremely rare in ascending aorta without atherosclerosis, aneurysm, cardiosurgical or traumatic state. Systemic sclerosis (SSc) is an autoimmune disorder of connective tissue and it can involve multisystem. Enhanced coagulation pathways, decreased fibrinolysis, and endothelial dysfunction probably contribute to vascular events in SSc. We report a case of a highly mobile thrombus in the ascending aorta, presented as an acute embolic stroke in the patient with systemic sclerosis. Surgical removal was performed to prevent recurrent embolic events.

• 자원리싸이클링
• /
• 제13권4호
• /
• pp.17-22
• /
• 2004

본 연구는 하수처리장에서 발생되는 농축슬러지의 처리방법에 대해 진행하였다. 방사선을 15 kGy 조사하였을 때 농축슬러지에 존재하는 일반세균 및 대장균을 99% 이상 제거, 유기물 분해등 소화조에서 일어나는 공정을 대체 할 수 있다. 폐수산자원인 불가사리를 가공하여 제조한 물리개량제를 첨가하여 응집공정의 효율을 높이고 아울러 함수율 10% 이상의 저감효과를 얻을 수 있다.