• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.577-578
• /
• 2012

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.04a
• /
• pp.1-6
• /
• 2003

In injection molding of an optical disk, a toric lens, etc., their performance depends on the transcription preciseness of fine surface structure of a mold. However, transcription behavior has not been made clear yet, because transcription is made in very short time and the structure is very small. In this paper, transcription properties have been examined, by using V-grooves of various sizes. machined on mold surfaces, and the following results are obtained. (1) Transcription properties have been made clear experimentally and it was found that the mold temperature $T_D$ makes great influence on the transcription property and that compression applying time $t_c$ should be taken more than 2.0s for fine transcription. (2) A mechanical model of transcription process, in consideration with strain recovery due to viscoelastic property of polymer. is proposed. (3) Simulation results agree with experimental ones fairly well. It means that the transcription model is useful for estimation of transcription property in advance of an actual. injection molding.

• Elastomers and Composites
• /
• v.50 no.3
• /
• pp.184-188
• /
• 2015

There is a need for light weight and high stiffness characteristics in the building structure as well as aircraft and cars. So fiber reinforced plastic with the addition of reinforcing agent such as glass fiber, carbon fiber, aramid fiber is utilized in this regard. In this study, mechanical strength, flow property and part shrinkage of glass fiber and carbon fiber reinforced PA6 were examined according to reinforcement content such as 10%, 20%, and 30%, and reinforcement type. The mechanical property was measured by a tensile test with specimen fabricated by injection molding and the flow property was measured by spiral test. In addition, we measured the part shrinkage of fiber reinforced PA6 that affects part quality. As glass fiber content increases, mechanical property increased by 75.4 to 182%, and flow property decreased by 18.9 to 39.5%. And part shrinkage decreased by 52.9 to 60.8% in the flow direction, and decreased by 48.2 to 58.1% in the perpendicular to the flow direction. As carbon fiber content increases, mechanical property increased by 180 to 276%, flow property decreased by 26.8 to 42.8%, and part shrinkage decreased by 65.0 to 71.8% and 69.5 to 72.7% in the flow direction and the direction perpendicular to the flow respectively.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2004.11a
• /
• pp.40-40
• /
• 2004

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.190-200
• /
• 2016

In this paper, we consider some aspects of binding properties that bind an anonymous user with messages. According to whether all the messages or some part of the messages are bound with an anonymous user, the protocol is said to satisfy the full binding property or the partial binding property, respectively. We propose methods to combine binding properties and anonymity-based authenticated key agreement protocols. Our protocol with the full binding property guarantees that while no participant's identity is revealed, a participant completes a key agreement protocol confirming that all the received messages came from the other participant. Our main idea is to use an anonymous signature scheme with a signer-controlled yet partially enforced linkability. Our protocols can be modified to provide additional properties, such as revocable anonymity. We formally prove that the constructed protocols are secure.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.6
• /
• pp.245-249
• /
• 2007

Amorphous IZO films were deposited on PET substrate by DC magnetron sputtering without substrate heating. In order to investigate effect of reactive gas addition on film properties, 0.2-0.4% of $H_2$ or $O_2$ gas was introduced during the deposition. Deposited IZO films were evaluated with mechanical property, electrical property, and water permeability. In the case of $H_2$ gas addition, mechanical property showed clear degradation compared to $O_2$ gas. In the case of $O_2$ gas, water permeability of the IZO film was increased compared to $H_2$ gas which could be attributed to the low adhesion of the film caused by bombardment of high energy negative oxygen ion. As a result, it is confirmed that water permeability of the film could be strongly affected by adhesion of the film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.378-380
• /
• 2005

Diamond like carbon (DLC) films are known that they show homogeneous alignment property when they are irradiated by Ar ion beam. The DLC films in most of studies were deposited by CVD and contain large mount of hydrogen. In order to identity the hydrogen effect on alignment property, DLC films is deposited by RF magnetron sputter using various ratio of Ar and H2 as reactive gas. DLC films are characterized by FT-IR, Raman and contact angle. Alignment property is estimated by measuring pretilt angle.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.433-436
• /
• 2013

This study suggests IFC-based bridge information modeling methods and its application model in BIM environment. Data model extension for bridge structure was achieved using user-defined property sets based on IFC framework. First, identification information was added. Bridge members are identified through physical and spatial semantic information added as property sets. Instances for semantic information were assigned according to standardized rules. Second, CO2 related factors were added for application information model. It can play a role to calculate and manage the quantity of CO2 emission. Third, properties for temporary structure to estimate and manage the construction cost were added. Finally, we investigated proposed methods through implementing the application information model of bridges.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.469-471
• /
• 2015

Objective: The objective of this paper is to review the interests and limitations of ergonomics regarding intellectual property. Background: There have been less interests in intellectual property among the ergonomics professionals. However, the importance of intellectual property is increasing as competitions in industry are getting fierce. Method: Literatures on the relations of intellectual property with ergonomics were examined, and the international patent classification system was studied. Results: No profound studies were found in the area of the relations of intellectual property with ergonomics. Ergonomics was not considered in patent classification. Conclusion: It is important to induce more interests regarding intellectual property to the community of ergonomics. Further studies are expected on the relations of intellectual property with ergonomics. Application: The results from this paper would be of help to inducing ergonomists to more interests in intellectual property.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.148-153
• /
• 2012

When the number of items of same type of industrial property is quite large, calculating depreciation for a group of such items may be more efficient than depreciating each item separately. Several different depreciation systems may be used for group depreciation. If the life of each vintage in an account are not estimated, then the BG procedure can be used; the BG procedure puts all vintages of the same type of property into a single broad group for depreciation purposes. In this case, only an estimate of the PASL and the net salvage ratio for all the property in the broad group is needed to calculate the depreciation charge.