• 공학교육연구
• /
• 제20권6호
• /
• pp.22-34
• /
• 2017

The purpose of this study is to present a model for fusion education combining engineering elements based on humanistic writing. Instruction design in presentation writing for engineering education progresses consists of four steps, such as instruction in visual, teamwork, feedback, and rewriting. Following these steps help engineering school students to analyze important data and to communicate their creative ideas. As writing is proceeding step by step, instruction design for presentation writing should come forth with specific methods to make students practice.

• 공학교육연구
• /
• 제21권6호
• /
• pp.44-53
• /
• 2018

The purpose of this paper is to develop a technical writing model suitable for engineering students based on the practice of technical writing using the patent application form for engineering students. The Dick & Carey model was used to design the teaching of technical writing using the patent application form. In particular, the instructor communicates with the learner and instructs the learner to produce and express students' own ideas. Instruction design in technical writing progresses consists of four steps, such as creating ideas by brainstorming, comprising contents, exercising writing, and feedback. Feedback occurs between an instructor and a learner and also does among students. As writing is proceeding step by step, instruction design for technical writing should come forth with specific methods to make students practice writing in work. Following these steps will help engineering school students to make up new products after graduating university.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.285-288
• /
• 2008

Most of multimedia processors for 2D/3D graphics acceleration use a lot of integer/floating point arithmetic units. We present a new architecture with an efficient ALU, built in a smaller chip size. It reduces instruction cycles significantly based on a foundation of multi-thread operation, variable length instruction words, dual phase operation, and phase instruction's coordination. We can decrease the number of instruction cycles up to 50%, and can achieve twice better performance.

• Journal of Multimedia Information System
• /
• 제8권4호
• /
• pp.243-250
• /
• 2021

Instructional contents are used to demonstrate a technical process to teach and walkthrough certain procedures to carry out a task. This type of informational content is widely used for teaching and lectures in form of tutorial videos and training videos. Since there are questions and uncertainties for what could be the killer application for the novel wearables, we propose a self-instruction training application on a smart glass to utilize already-available instruction videos as well as public open data in creative ways. We design and implement a prototype application to help users train by wearing smart glasses specifically designed for two concrete and hand-constrained use cases where the user's hands need to be free to operate. To increase the efficiency and feasibility of the self-instruction training, we contribute to the development of a wearable killer application by integrating a voice-based user interface using speech recognizer, public open data APIs, and timestamp-based procedural content navigation structure into our proof-of-concept application.

• 공학교육연구
• /
• 제23권1호
• /
• pp.3-9
• /
• 2020

The purpose of the study was to develop the Arduino based STEAM instruction materials for creative engineering design class. PDIE model was used in this study. We developed a STEAM lesson plan and a STEAM lesson worksheet for a total of six sessions through the steps of preparation, development, implementation and evaluation. The validity of the instruction materials was evaluated by the 10 experts using a survey. The instruction materials were applied to the class (52 students attended) of the creative engineering designs unit in technology and home economics subject. The class satisfaction and the creative solving-problem ability were examined after the calss. The class satafacition was high as the average of 10 item was 4.57 (out of 5). The paired t-test was conducted to compare the means of the creative solving-problem ability. It was observed that 'understanding and mastery of knowledge, thought, function and skills in a specific domain', 'divergent thinking', 'critical and logical thinking' and ' motivational factors' were significantly increased after the class. The instruction materials develped in this study were successfully designed to enhance the creative solving-problem ability by designing creative tasks and to intrique the interest by adding visual and auditory stimuli with the Arduino.

• 한국초등과학교육학회지:초등과학교육
• /
• 제29권4호
• /
• pp.515-525
• /
• 2010

The purpose of this study was to analyze of how the elementary school teachers lead their classes of a science laboratory instruction and an engineering laboratory instruction in a science subject class. For this study, science laboratory and engineering laboratory lessons were selected and for each science and engineering laboratory lesson, five elementary school teachers were video-recorded of their lessons. The science and engineering laboratory lessons were analyzed by utilizing processes of the science model and the engineering model based on Schauble et al. (1991). The results of these studies are as follows: In science laboratory instruction, some participants didn't distinguish the difference between the science laboratory goal and the engineering laboratory goal. All of participants used search and end strategy of engineering laboratory for science laboratory lesson. In engineering laboratory instruction, all of participants guided to students engineering laboratory goal and used inferences and search strategy of engineering laboratory. However they didn't use the trial and error strategy or redesign which can be an essential element in engineering and design process. Educational implications are discussed.

• 정보교육학회논문지
• /
• 제7권3호
• /
• pp.263-274
• /
• 2003

본 논문에서는 JSP를 이용하여 동적인 웹 기반 교수 학습 시스템을 설계 구현하여 웹 기반 교수 학습을 위한 방법을 제시하였다. 멀티미디어 학습자료를 이용한 학습방법과 학습자의 다양한 요구에 부응하기 위하여 학습자가 자유롭게 학습할 수 있는 학습자 중심의 교육모델을 제공하고자 설계하였다. 개발된 웹 기반 교수 학습 시스템은 학습자가 원하는 과목을 수강하여 강의 듣기, 과제 제출 및 시험보기를 가능하게 하여 실제수업에 활용하는 것에 초점을 맞추었고, 실제 수업과 동일한 효과를 나타내기 위해 전자 칠판 기능과 고음질, 고압축의 음성 원격 강의, 동영상 등을 포함한 멀티미디어 강의 자료를 활용하여 구현하였다. 교수자는 웹 상에서 직접 멀티미디어 자료, 이미지를 삽입하여 선다형, 단답형, 논술형의 시험을 출제할 수 있도록 하여 다양한 평가를 가능하게 하였고, 과제 관리, 강의 등록 등 학사 관리를 쉽게 하도록 하였다.

• 공학교육연구
• /
• 제26권1호
• /
• pp.3-11
• /
• 2023

The purpose of this study is to develop Raspberry Pi-based CanSat instruction materials for liberal arts classes to be used in university space education. The educational satellite simulation program is developed by applying the ADDIE program consisting of analysis, design, development, execution, and evaluation of 15 lessons per semester. The usefulness of the instruction materials is evaluated by a validity test of a total of 6 experts. The proposed materials are applied to 100 college students from various majors. To analyze the impact on creative problem-solving ability, a questionnaire is conducted before and after class, and as a result, it is confirmed that there is a significant improvement in all areas after class. The class satisfaction survey is conducted for a total of 10 questions, and the average score is 4.41 out of 5, which is high. In conclusion, the proposed instruction materials make it possible to achieve successful space education using Raspberry Pi and improve creative problem-solving ability in universities.

• 정보교육학회논문지
• /
• 제7권2호
• /
• pp.189-197
• /
• 2003

WBI(Web Based Instruction)는 교수 학습 자료의 개발 부담으로 특정 교과에 국한되어 있다. 본 논문은 WBI를 워드프로세서의 수업에 적용하여 인터넷 기반의 개별화된 교수-학습 시스템을 구현하였다. WBI를 적용한 워드프로세서 수업 방식은 전통적 수업 방식에 비해 학생들이 더욱 흥미를 느끼게 하고, 워드프로세서의 수준별, 능력별, 단계별 학습 선택으로 인해 학생 중심의 학습을 가능하게 하였다. 또한 개별학습 과제를 통해 학습내용을 실시간 평가 할 수 있으며 피드백이 가능하여 학습 효과를 극대화시킬 수 있었다.

• 공학교육연구
• /
• 제19권2호
• /
• pp.76-82
• /
• 2016

The purpose of this study is to identify core elements required of instruction consulting and to develop a systematic consulting procedure for successful Flipped Learning. The main contents of this study to achieve its purpose are as follows. First, core elements required of consulting are deduced by analyzing cases of instruction implemented with Flipped Learning. Second, consulting procedure is constructed based on core consulting elements of Flipped Learning. Based on the study results, the 3P process is suggested as the elements and procedure of instruction consulting for Flipped Learning. The 3P process has the following characteristics. The first stage Preparation involves guiding students to have an objective viewpoint about the lesson beginning with building a relationship with the instructor. Also, a lesson plan and source materials for lesson are selected and developed. The second stage Performance involves implementing lesson coaching oriented towards cooperative problem-solving to find better direction. The last stage Post-review involves introspection necessary for continuous quality improvement of lessons. The validity of the instruction consulting elements for Flipped Learning applied to deduce the aforementioned results has been verified after specialist review and field application.