• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.74-76
• /
• 2007

In this paper a maximum power point tracking(MPPT) techniques for power of PV(photovoltaic) systems are presented using boost converter for a connected single phase inverter. On the basic principle of power generation for the PV module, algorithms for maximum power point tracking are described by utilizing a boost converter to adjust the output voltage of the PV module. Based on output power of a boost converter, single phase inverter uses predicted current control to control four IGBT's switch in full bridge. Furthermore a low cost control system for solar energy conversion using the DSP is developed, based on boost converter to adjust the output voltage of the PV module. The effectiveness of the proposed inverter system is confirmed experimentally and by means of simulation. Finally, experimental results confirm the superior performance of the proposed method.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.50-63
• /
• 2017

Safety culture degradation signs in nuclear power plants with complex and diverse systems can lead to their equipments performance deterioration. If these signs are neglected, they become potential causes of accidents. Therefore, it is necessary to monitor safety culture in the point of view of organization and management as well as to evaluate safety performance of nuclear power plants. Therefore, This paper suggested a methodology to evaluate safety culture weakness contributing the accidents' root causes in the case accidents occur at nuclear power plants. After reviewing methodologies using at domestic and international industry, the methodology suitable for domestic nuclear power plants was determined.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.1
• /
• pp.14-24
• /
• 2011

In this paper, design optimization for mixed-flow pump impellers and diffusers has been studied using a commercial computational fluid dynamics (CFD) code and DOE (design of experiments). We also discussed how to improve the performance of the mixed-flow pump by designing the impeller and diffuser. Geometric design variables were defined by the vane plane development, which indicates the blade-angle distributions and length of the impeller and diffusers. The vane plane development was controlled using the blade-angle in a fixed meridional shape. First, the design optimization of the defined impeller geometric variables was achieved, and then the flow characteristics were analyzed in the point of incidence angle at the diffuser leading edge for the optimized impeller. Next, design optimizations of the defined diffuser shape variables were performed. The importance of the geometric design variables was analyzed using $2^k$ factorial designs, and the design optimization of the geometric variables was determined using the response surface method (RSM). The objective functions were defined as the total head and the total efficiency at the design flow rate. Based on the comparison of CFD results between the optimized pump and base design models, the reason for the performance improvement was discussed.

• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.205-212
• /
• 2008

In the environment with multiple heterogeneous wireless sensor networks with a single point of sensed data collection or a gateway (GW), relay points (RPs) may be required for the energy efficient delivery of sensed data from static or mobile sinks to the GW. The optimal placement of RPs becomes an even more difficult problem if static sinks are dynamically added or the trajectory of mobile sinks can not be known in advance. In order to resolve this problem, we propose a mechanism to deploy RPs in a grid pattern and to use the tree-based relaying network for reducing the cost of the RP and for reducing the control overhead incurred by the route setup from sinks to the GW. For the performance evaluation of our proposed mechanism, we have carried out a numerical analysis on a single route setup from a sink to the GW and, for more general performance evaluations, ns-2 based simulations have been carried out. According to the performance evaluation results, our tree-based relaying network mechanism outperforms that based on AODV in terms of the data delivery time, the network service time and the control overhead.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.98-102
• /
• 2017

In this paper, we study RF-powered backscatter cognitive radio networks to improve the performance for the secondary user which is backscatter radio based wireless sensors. In our proposed model, we consider an avoiding the doubly round-trip attenuation to add a carrier emitter and utilization of spectrum sensing information. When the primary channel is busy, the secondary user is able to harvest RF energy from the channel through a hybrid-access point (H-AP) and a carrier emitter. When the channel becomes idle, the secondary user will be use the harvested energy to operate wireless sensors, to use the sensing and to backscatter through the carrier emitter. We model mathematically the deterministic and multisource elements of a number of tagged channels. In the proposed communication environment, we show the BER performance of the backscatter communication using WiFi signal.

• Advances in concrete construction
• /
• v.2 no.2
• /
• pp.145-162
• /
• 2014

In this study, the fracture toughness $K_{IC}$ of high performance concrete (HPC) was determined by conducting three-point bending tests on eighty notched HPC beams of $500mm{\times}100mm{\times}100mm$ at high temperatures up to $450^{\circ}C$ (hot) and in cooled-down states (cold). When the concrete beams exposed to high temperatures for 16 hours, both thermal and hygric equilibriums were generally achieved. $K_{IC}$ for the hot concrete sustained a monotonic decrease tendency with the increasing temperature, with a sudden drop at $105^{\circ}C$. For the cold concrete, $K_{IC}$ sustained a two-stage decrease trend, dropping slowly with the heating temperature up to $150^{\circ}C$ and rapidly thereafter. The fracture energy-based fracture toughness $K_{IC}$' was found to follow similar decrease trends with the heating temperature. The weight loss, the fracture energy and the modulus of rapture were also evaluated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.780-786
• /
• 2012

Surveillance has become one of promising application areas of wireless sensor networks which allow for pervasive monitoring of concerned environmental phenomena by facilitating context awareness through sensor fusion. Existing systems that depend on a postmortem context analysis of sensor data on a centralized server expose several shortcomings, including a single point of failure, wasteful energy consumption due to unnecessary data transfer as well as deficiency of scalability. As an opposite direction, this paper proposes an energy-efficient distributed context-aware surveillance in which sensor nodes in the wireless sensor network collaborate with neighbors in a distributed manner to analyze and aware surrounding context. We design and implement multi-modal sensor stations for use as sensor nodes in our wireless sensor network implementing our distributed context awareness. This paper presents an initial experimental performance result of our proposed system. Results show that multi-modal sensor performance of our sensor station, a key enabling factor for distributed context awareness, is comparable to each independent sensor setting. They also show that its initial performance of context-awareness is satisfactory for a set of introductory surveillance scenarios in the current interim stage of our ongoing research.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1458-1464
• /
• 2009

While industrial development as many buildings were builted, amount of energy consume in building also increase rapidly. At this point be tormented the energy depletions are big problem on the rise. The development of renewable energy in trying to resolve the fundamental problem that the technical level is still incomplete. Because of this, reduce energy use in buildings to lot of study. Most of the energy involved in building mechanical system for so many research is continue. Among them, be interested in building mechanical system. Building mechanical system is configured Air conditioning, sanitation, urban (environmental) equipment. In the design of equipment, installation, maintenance, applies to all devices in the field of industrial equipment and general engineering equipment field are within bounds to say that all of the equipment field. However, domestic technology level is still fly short of international standards in architecture, we spand many energy. Because of this, find the current situation and identify the problems look up ways to improve them.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1717-1726
• /
• 2017

In the nuclear industry, mechanical engineers spend a significant portion of their time designing equipment such as manipulators, bogies, mechanical grippers, and so on. Some customized designs can be considered as standard mechanical equipment in this area, although it is not unusual to find that an existing design cannot simply be copied from one project to another. Varied performance requirements can dictate that redesign, often quite extensive redesign, is required. However, if something similar has been done before, engineers could use that as a starting point for the new project. In this regard, this study presents several guidelines inspired by previous design knowledge for similar development cases. Moreover, this study presents more detailed suggestions such as design guidelines for an argon-based hot cell atmosphere and design experience for a large-scale practical hot cell facility. Design considerations and case studies dealt with in this study are dedicated to teleoperation manipulators that are used at a large-scale argon cell facility for pyroprocess integrated inactive demonstration (PRIDE), at the Korea Atomic Energy Research Institute. In particular, for case studies to support the suggested recommendations, a fabricated telemanipulator system for PRIDE is introduced, and several kinds of experimental results associated with it are presented.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.3
• /
• pp.19-24
• /
• 2012

Propeller shall have high efficiency and improved aerodynamic characteristics to get the thrust to fly at high speed for the turboprop aircraft. That is way Clark-Y airfoil which is used to conventional 1600kW class aircraft propeller is selected as a blade airfoil. Adkins method is used for aerodynamic design and performance analysis with respect to the propeller design point. Adkins method is based on the vortex-blade element theory which design the propeller to satisfy the condition for minimum energy loss. propeller geometry is generated by varying chord length and pitch angle at design point of turboprop aircraft. The propeller design results indicate that is evaluated to be properly constructed, through analysis of propeller aerodynamic characteristics using the Meshless method and MRF, SM method.